default.cfg.example

# Need help configuring? View the Documentation: https://poloniexlendingbot.readthedocs.io/en/latest/configuration.html

[API]
# Where to work? "Poloniex" or "Bitfinex". Default is "Poloniex"
#exchange = Poloniex
apikey = YourAPIKey
secret = YourSecret

[POLONIEX]
# Full list of supported currencies
all_currencies = STR,BTC,BTS,CLAM,DOGE,DASH,LTC,MAID,XMR,XRP,ETH,FCT,#BTG

[BITFINEX]
# Full list of supported currencies
all_currencies = USD,BTC,BCH,ETH,XRP,IOT,XMR,LTC,OMG,ETC,EOS,DSH,ZEC,#BTG

[BOT]
#Custom name of the bot, that will be displayed in html page
label = Lending Bot

#Sleeps between active iterations, time in seconds (1-3600)
sleeptimeactive = 60

#Sleeps between inactive iterations, time in seconds (1-3600)
#Set to the same value as sleeptimeactive to disable
sleeptimeinactive = 300

#Timeout in seconds, the bot shall wait for a response during each request
#timeout = 30

#Minimum daily lend rate in percent (0.0031-5)
#Setting to 0.0031 is about 1% a year, not worth it.
mindailyrate = 0.005

#Maximum lending rate. 2% is good choice because it's default at margin trader interface.
#5% is the maximum rate accepted by the exchange (0.003-5)
maxdailyrate = 5

#The number of offers to split the available balance across the [gaptop, gapbottom] range. (1-20)
spreadlend = 3

#The depth of lendbook to move through before placing the first (gapbottom) and last (gaptop) offer.
#If gapbottom is set to 0, the first offer will be at the lowest possible rate.
#However some low value is recommended to skip dust offers.
# Gap modes: Raw, RawBTC, Relative
gapMode = RawBTC
gapbottom = 40
gaptop = 200

#Daily lend rate threshold after which we offer lends for x days as opposed to 2.
#If set to 0 all offers will be placed for a 2 day period (0.003-5)
# Poloniex max lending period: 60 days
# Bitfinex max lending period: 120 days
xdaythreshold = 0.2
xdays = 60
#When xdayspread is set, lending days will be incremented linear from 2 days at (xdaythreshold/xdayspread) lent rate
#to (xdays) days at (xdaythreshold) lent rate. (0-10)
#xdayspread = 2

#Auto-transfer of funds from exchange to lending balance.
#Enter ALL to transfer all coins, enter ACTIVE to transfer any coins you have in your lending account when the bot starts, these can be mixed.
#The currencies you enter below (comment it out to disable entirely, just leaving empty will result in an error) will be automatically transferred from your exchange balance to your lending balance whenever you deposit them.
#transferableCurrencies = STR,BTC,BTS,CLAM,DOGE,DASH,LTC,MAID,XMR,XRP,ETH,FCT
#transferableCurrencies = USD,BTC,BCH,ETH,XRP,IOT,XMR,LTC,OMG,ETC,EOS,DSH,ZEC

#Minimum loan size, the minimum size of offers to make, bigger values prevent the bot from loaning small available amounts but reduce loan fragmentation.
minloansize = 0.01

#Keep Stuck Orders - Sometimes an order gets partially filled. When this happens it may leave the remainder of your coin under the set minloansize.
#If this happens, KeepStuckOrders will keep your order where it is so maybe it can be filled. Otherwise it will be canceled and held until orders expire.
keepstuckorders = True

#Hide coins - Instead of keeping your coins lent out at minlendrate when it is not met, the bot will hold them and wait for the rate to surpass it.
hideCoins = True

#End date for lending, bot will try to make sure all your loans are done by this date so you can withdraw or do whatever you need.
#Uncomment to enable.
#Format: YEAR,MONTH,DAY
#endDate = 2016,12,25

#Raw maximum amount to lend if under maxtolendrate.
#If set to 0 or commented: the bot will check for maxpercenttolend.(0+)
#maxtolend = 0

#Maximum percent to lend if under maxtolendrate.
#If set to 0 or commented: the bot will lend 100% of your balance regardless of rate. (0-100)
#maxpercenttolend = 0

#Max to lend conditional rate.
#If set to more than 0: the maxtolend or maxpercenttolend will be used when the rate is less than or equal to the maxtolendrate.
#If set to 0 or commented: the bot will use the maxtolend or maxpercenttolend all the time. (0.0031-5)
#maxtolendrate = 0

#FRR as min, tells the bot whether or not to use the flash return rate (https://support.bitfinex.com/hc/en-us/articles/213919009-What-is-the-Flash-Return-Rate-)
#instead of mindailyrate. This only works on bitfinex.
#frrasmin = False

# The Flash Return Rate Delta (frrdelta) is a dynamic funding rate option that allows you to specify an offset from the Flash Return Rate. This only works on bitfinex and ffrasmin = TRUE
frrdelta = 0.0000

#This option creates a json log file instead of console output which includes the most recent status.
#Uncomment both jsonfile and jsonlogsize to enable.
#Keep this in the default location if you want to use the webserver.
#jsonfile = www/botlog.json

#Limits the amount of log lines to save.
#jsonlogsize = 200

#Enables a webserver for the www folder, in order to easily use the lendingbot.html with the .json log.
#startWebServer = true

#Customize the IP and port that the webserver is hosted on. Defaults respectively to 0.0.0.0 and 8000
#0.0.0.0 will point to your default IP (Local IP on LAN as well as localhost), set to 127.0.0.1 if you want it to be only accessible by host computer.
#Do not set to a reserved port
#Advanced users only.
#customWebServerAddress = 0.0.0.0
#customWebServerPort = 8000

#Customize or select the desired template for the webserver. Default to 'www'.
#customWebServerTemplate = www

#The currency that the HTML Overview will present the earnings summary in.
#Options are BTC, USDT (USD on Bitfinex), ETH or anything as long as it has a direct BTC market. The default is BTC.
#outputCurrency = BTC

#Plugins allow extending Bot functionality with extra features.
#plugins = AccountStats,Charts

#[ACCOUNTSTATS]
#ReportInterval = 86400

#[CHARTS]
#DumpInterval = 21600
#HistoryFile = www/history.json

# Currencies can be configured here.
#[BTC]
#minloansize = 0.01
#mindailyrate = 0.18
#maxactiveamount = 1
#maxtolend = 0
#maxpercenttolend = 0
#maxtolendrate = 0
#gapmode = RawBTC
#gapbottom = 20
#gaptop = 400
#frrasmin = False
#frrdelta = 0.0000

#[CLAM]
#minloansize = 1
#mindailyrate = 0.6
#maxactiveamount = 1
#maxtolend = 0
#maxpercenttolend = 0
#maxtolendrate = 0
#gapmode = raw
#gapbottom = 10
#gaptop = 20
#frrasmin = False
#frrdelta = 0.0000

[notifications]
notify_new_loans = False
notify_tx_coins = False
notify_xday_threshold = False
notify_summary_minutes = 0
notify_caught_exception = False
#notify_prefix = [Polo]

email = False
email_login_address = me@gmail.com
email_login_password = secretPassword
email_smtp_server = smtp.gmail.com
email_smtp_port = 465
email_smtp_starttls = False
email_to_addresses = me@gmail.com,you@gmail.com

slack = False
slack_token = 1234567890abcdef
slack_channels = #cryptocurrency,@someUser
slack_username = Poloniex Bot

telegram = False
telegram_bot_id = 1234567890abcdef
telegram_chat_ids = @polopolo,@cryptocurrency

pushbullet = False
pushbullet_token = 1234567890abcdef
pushbullet_deviceid = 1234567890abcdef

irc = False
irc_host = irc.freenode.net
irc_port = 6667
irc_nick = LendingBot
irc_ident = ledningbot
irc_realname = Poloniex lending bot
irc_target = #bitbotfactory

#[MarketAnalysis]
# PLEASE refer to the docs before attempting to use any of this. There are a lot of things here that will not work
# correctly unless you understand what you are doing.
analyseCurrencies = STR,BTC,BTS,CLAM,DOGE,DASH,LTC,MAID,XMR,XRP,ETH,FCT
lendingStyle = 75
MACD_long_win_seconds = 1800
#MACD_short_win_seconds = 150
# 3 days = 60 * 60 * 24 * 3 = 259200
percentile_seconds = 259200
# keep_history_seconds > (greater of (percentile_seconds, MACD_long_win_seconds) * 1.1)
#keep_history_seconds = 285120
#recorded_levels = 10
# 15 %  means we need one data point every 9 seconds. You probably don't need to change this.
#data_tolerance = 15
#delete_thread_sleep = 60
#ma_debug_log = False

[Daily_min]
# This defaults to percentile, MACD is the moving average calc and should give better rates
#method = MACD
multiplier = 1.05