-
-
Notifications
You must be signed in to change notification settings - Fork 230
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Utility and climate panels not accessible #2073
Comments
Thank you for reply. Utility I had disabled, now are accessible.
|
This is commented out, but according to docs is a mandatory parameter to be set for the climate addon to work. |
That's correct. One of the relays must be assigned to the climate. |
So it is not possible to use the Climate panel to control the Zigbee thermostatic head? There, no relay or temperature sensor is needed, the head controls everything by itself. Can it just work as a custom thermostat with an internal sensor and relay? If so, it would be very useful if the climate panel could be used for any external thermostat. |
Sure, you can do that. E.g. just assign a custom button to the thermostat entity from HA. The climate addon enables the use of your panel's relays to act as a thermostat (either cooler or heater) using the internal temperature sensor and independent of the network availability. If you don't want to use the internal relay or sensor and just want to control a otherwise remote thermostat, you don't need the "nspanel_esphome_addon_climate_heat.yaml" |
I'm starting to get it now. But it's still not clear to me how I can enter the desired temperature with an analog slider and the heating mode for the head via NSPanel |
I've just for a test assigned a custom button to a zigbee thermostat and I can control it like this: VID_20240423_120804.mp4 |
Thank you. I try this today. |
Just assign the climate entity related to your thermostat to a button and the system will take care.
The add on climate is necessary only when you are using your panel's physical relays to control a heater or a cooler. |
Thank you very much. |
Working as you describe @edwardtfn |
TFT Version
4.3.4
ESPHome Version
4.3.4
Blueprint Version
4.3.4
Panel Model
EU
What is the bug?
With the new sonnoff reflashed panel, is not accessible Climate and Utility panels.
Steps to Reproduce
nothing
Your Panel's YAML
ESPHome Logs
No response
Home Assistant Logs
No response
The text was updated successfully, but these errors were encountered: