| Amount | Description | Package | Part | URL |
|---|---|---|---|---|
| 1 | Adafruit Feather V2 | Feather V2 | A1 | Adafruit, Amazon, Mouser |
| 3 | Capacitor 100 nF | C1206 | C1, C3, C4 | Reichelt, Mouser |
| 1 | Capacitor 1000 uF / 16 V | E5-8.5 | C2 | Reichelt, Mouser |
| 4 | Resistor 100 Ohm | R1206 | R5, R6, R7, R8 | Reichelt, Mouser |
| 1 | Resistor 1 kOhm | R1206 | R2 | Reichelt, Mouser |
| 1 | Resistor 1.2 kOhm | R1206 | R3 | Reichelt, Mouser |
| 1 | Resistor 10 kOhm | R1206 | R1 | Reichelt, Mouser |
| 1 | Resistor 100 kOhm | R1206 | R4 | Reichelt, Mouser |
| 1 | ESD suppressor CDSOD323-T05C | SOD-323 | D1 | Conrad, Farnell, Mouser |
| 1 | Micro fuse block, 4A slow | OMNI-BLOK | F1 | Reichelt, Farnell, Mouser |
| 1 | Espressif ESP32-DEVKIT | ESP32-DEVKITC-32D | U1 | Mouser, Amazon |
| 1 | N-channel mosfet BSS138 | SOT23 | Q1 | Reichelt, Farnell, Mouser |
| 1 | P-channel mosfet STD26P3LLH6 | TO252 | Q2 | Reichelt, Farnell, Mouser |
| 5 | Conn_01x02 | Wuerth Elektronik 66200211022 | J1, J2, J4, J6, J8 | Farnell, Mouser |
| 2 | Conn_01x03 | Wuerth Elektronik 66200311022 | J3, J7 | Farnell, Mouser |
| 1 | Conn_02x05_Odd_Even | Wuerth Elektronik 61201021621 | J5 | Farnell, Mouser |
| --- | --- | --- | --- | --- |
| 5 | Plug_01x02 | Wuerth Elektronik 662002013322 | J1*, J2*, J4*, J6*, J8* | Mouser |
| 2 | Plug_01x03 | Wuerth Elektronik 662003013322 | J3*, J7* | Mouser |
| 1 | WS2812B 5050 8x32 RGB Flexible LED Panel Matrix | - | - | Amazon |
| 1 | Power supply 5 V / 5 A (4 A would be enough) | - | - | Reichelt, Mouser |
| 1 | Power cable | - | - | Reichelt, Mouser |
| 1 | Power supply plug | - | - | Mouser |
| 1 | USER-Button | - | - | Amazon |
| 1 | RESET-Button | - | - | Amazon |
| 1 | Light Sensor | LDR5528 | - | Amazon |
| 1 | Audio Sensor-Module | INMP441 | - | Amazon |
| 4 | Insert-Nuts M2 | - | - | Amazon |
- Note, only ONE ESP32 is required. Either U1 or A1.
- Note, you can also use the Molex 2157601002 connectors for J1, J2, J4, J6 and J8 and the Molex 2157601003 for J3 and J7.
- Note, you can also use the Molex 2157591002 plugs for J1*, J2*, J4*, J6* and J8* and the Molex 2157591003 for J3* and J7*. You also need crimp terminals (e.g. Wuerth Elektronik 66200113722DEC or Molex 2064600021)
- Do NOT combine connectors and plugs from Molex and Wuerth Elektronik!
If you have further ideas or you found some bugs, great! Create a issue or if you are able and willing to fix it by yourself, clone the repository and create a pull request.
The whole source code is published under the MIT license.