001_qcom_nanc_add_delay.patch

--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2756,6 +2756,7 @@ static int qcom_nandc_setup(struct qcom_
 		    NAND_DEV_CMD_VLD_VAL);
 
 	/* enable ADM or BAM DMA */
+	udelay(1000);
 	if (nandc->props->is_bam) {
 		nand_ctrl = nandc_read(nandc, NAND_CTRL);
 		nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN);
@@ -2763,6 +2764,7 @@ static int qcom_nandc_setup(struct qcom_
 		nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN);
 	}
 
+        udelay(1000);
 	/* save the original values of these registers */
 	nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1));
 	nandc->vld = NAND_DEV_CMD_VLD_VAL;
@@ -2954,6 +2956,7 @@ static int qcom_nandc_probe(struct platf
 	if (ret)
 		goto err_aon_clk;
 
+	udelay(2000);
 	ret = qcom_nandc_setup(nandc);
 	if (ret)
 		goto err_setup;