Merge branch 'master' of github.com:Byzantium/Byzantium

porteus/murmur/README

@@ -0,0 +1,11 @@
+Murmur is the VoIP server component for Mumble. Murmur is
+installed in a system-wide fashion, but can also be run by
+individual users. Each murmur process supports multiple virtual
+servers, each with their own user base and channel list.
+Administration of murmur is done through D-Bus.
+
+To run murmur at boot, add the following to /etc/rc.d/rc.local:
+
+if [ -x /etc/rc.d/rc.murmur ]; then
+  /etc/rc.d/rc.murmur start
+fi

porteus/murmur/doinst.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.murmur.new:
+if [ -e etc/rc.d/rc.murmur ]; then
+  cp -a etc/rc.d/rc.murmur etc/rc.d/rc.murmur.new.incoming
+  cat etc/rc.d/rc.murmur.new > etc/rc.d/rc.murmur.new.incoming
+  mv etc/rc.d/rc.murmur.new.incoming etc/rc.d/rc.murmur.new
+else
+  # Install executable otherwise - irrelevant unless user starts in rc.local
+  chmod 0755 etc/rc.d/rc.murmur.new
+fi
+
+config etc/rc.d/rc.murmur.new
+config etc/murmur.ini.new

porteus/murmur/murmur.SlackBuild

@@ -0,0 +1,84 @@
+#!/bin/bash
+
+# Slackware build script for murmur
+
+PRGNAM=murmur
+SRCNAM=mumble
+VERSION=${VERSION:-1.1.4}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+qmake \
+  main.pro \
+  CONFIG+=no-client
+
+make
+
+mkdir -p $PKG/usr/bin \
+  $PKG/etc \
+  $PKG/var/lib/mumble-server \
+  $PKG/var/run/mumble-server \
+  $PKG/var/log/mumble-server
+install -m 0755 ./release/murmurd $PKG/usr/bin
+install -m 0644 ./scripts/murmur.ini.system $PKG/etc/murmur.ini.new
+strip --strip-unneeded $PKG/usr/bin/* 2>/dev/null || true
+
+mkdir -p $PKG/usr/man/man1
+install -m 0644 ./man/murmurd.1 $PKG/usr/man/man1
+gzip -9 $PKG/usr/man/man1/*
+
+DOCS="CHANGES INSTALL LICENSE README README.Linux $CWD/$PRGNAM.SlackBuild"
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+install -m 0644 $DOCS $PKG/usr/doc/$PRGNAM-$VERSION
+
+mkdir -p $PKG/install $PKG/etc/rc.d
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/rc.murmur > $PKG/etc/rc.d/rc.murmur.new
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

porteus/murmur/murmur.info

@@ -0,0 +1,10 @@
+PRGNAM="murmur"
+VERSION="1.1.4"
+HOMEPAGE="http://mumble.sourceforge.net/"
+DOWNLOAD="http://downloads.sourceforge.net/mumble/mumble-1.1.4.tar.gz"
+MD5SUM="06fdd23043fd987b2eb6b56913fac181"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="adev"
+EMAIL="adev@linuxmail.org"
+APPROVED="David Somero,pprkut"

porteus/murmur/murmur.ini

@@ -0,0 +1,77 @@
+# To enable username registration through
+# http://webserver/cgi-bin/mumble-server/register.cgi
+# then this value must be set to a valid email
+# and you must be running a SMTP server on this
+# machine.
+#emailfrom =
+
+# How many login attempts do we tolerate from one IP
+# inside a given timeframe before we ban the connection?
+# Note that this is global (shared between all virtual servers), and that
+# it counts both successfull and unsuccessfull connection attempts.
+# Set either Attempts or Timeframe to 0 to disable.
+#autobanAttempts = 10
+#autobanTimeframe = 120
+#autobanTime = 300
+
+# The below will be used as defaults for new configured servers.
+# If you're just running one server (the default), it's easier to
+# configure it here than through DBus/SQL.
+#
+# Welcome message sent to users
+welcometext="<br />Welcome to the Byzantium Murmur network.<br />Watch your backs.<br />"
+
+# Port to bind TCP and UDP sockets to
+port=64738
+
+# Specific IP or hostname to bind to.
+# If this is left blank (default), murmur will bind to all available addresses.
+#host=
+
+# Password to join server
+serverpassword=
+
+# Maximum bandwidth (in bytes per second) clients are allowed
+# send speech at.
+bandwidth=10000
+
+# Maximum number of concurrent clients allowed.
+users=50
+
+# Murmur retains the per-server log entries in an internal database which
+# allows it to be accessed over D-Bus.
+# How many days should such entries be kept?
+#logdays=31
+
+# To enable public registration, the serverpassword must be blank, and this
+# must all be filled out.
+# The password here is used to create a registry for the server name; subsequent
+# updates will need the same password. Don't loose your password.
+# The URL is your own website, and only set the registerHostname for static IP
+# addresses.
+#
+registerName=Byzantium Mumble Network
+registerPassword=
+registerUrl=http://byzantium.mesh/
+registerHostname=
+
+# If you have a proper SSL certificate, you can provide the filenames here.
+sslCert=/etc/httpd/server.crt
+sslKey=/etc/httpd/server.key
+
+# Path to database. If blank, will search for
+# murmur.sqlite in default locations.
+database=/var/lib/mumble-server/mumble-server.sqlite
+
+# PIDfile to use
+# Leave blank to place pidfile in current directory
+pidfile=/var/run/mumble-server/mumble-server.pid
+
+# Murmur defaults to not using D-Bus. If you wish to use dbus, please
+# specify so here.
+#
+dbus=system
+
+# Murmur default to logging to murmur.log. If you leave this blank,
+# murmur will log to the console (linux) or through message boxes (win32).
+logfile=

porteus/murmur/rc.murmur

@@ -0,0 +1,41 @@
+#!/bin/bash
+
+PIDFILE="/var/run/mumble-server/mumble-server.pid"
+
+murmur_start() {
+  echo -n "Starting Murmur Server: "
+  if [ ! -f $PIDFILE ]; then
+    /usr/bin/murmurd -ini /etc/murmur.ini & > /dev/null 2>&1
+    echo "OK"
+  else
+    echo -n "Removing stale lock.. "
+    /bin/rm -f $PIDFILE
+    /usr/bin/murmurd -ini /etc/murmur.ini & > /dev/null 2>&1
+    echo "OK"
+  fi
+}
+
+murmur_stop() {
+  echo -n "Stopping Murmur: "
+  if [ -f $PIDFILE ]; then
+    /bin/kill $(/bin/cat $PIDFILE)
+    /bin/rm -f $PIDFILE
+    echo "OK"
+  else
+    echo "Not Running"
+  fi
+}
+
+case "$1" in
+  start)
+    murmur_start
+    ;;
+  stop)
+    murmur_stop
+    ;;
+  restart)
+    murmur_stop && (/bin/sleep 1 && murmur_start)
+    ;;
+  *)
+    echo "Usage: rc.murmur {start|stop|restart}"
+esac

porteus/murmur/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-------------------------------------------------|
+murmur: murmur (low latency voip server)
+murmur: 
+murmur: Murmur is the VoIP server component for Mumble. Murmur is
+murmur: installed in a system-wide fashion, but can also be run by
+murmur: individual users. Each murmur process supports multiple virtual
+murmur: servers, each with their own user base and channel list.
+murmur: Administration of murmur is done through D-Bus.
+murmur: 
+murmur: Homepage: http://mumble.sourceforge.net/
+murmur: 
+murmur: