Black screen after picker - Thinkpad X250

[dessenag]

As per title, after the picker I get a stationary black screen with no verbose until timeout is reached.
I attach the config.plist (which has been modified only for debugging purposes) and the debug entry.
I am able and willing to provide more information, if needed

opencore-2021-10-20-165335.txt
config.zip

.

[CLAY-BIOS]

As per title, after the picker I get a stationary black screen with no verbose until timeout is reached. I attach the config.plist (which has been modified only for debugging purposes) and the debug entry. I am able and willing to provide more information, if needed

opencore-2021-10-20-165335.txt config.zip

.

Select reset nvram on the boot interface to clear nvram.

[dessenag]

Hi, thank you. However, this did not solve the issue. Still stuck on a black screen after picker at the same code:
OCDI: Built DMG DP: VenHw

[CLAY-BIOS]

Hi, thank you. However, this did not solve the issue. Still stuck on a black screen after picker at the same code:
OCDI: Built DMG DP: VenHw

Tell me your system version and network card model.
Try disabling Bluetooth in BIOS.

[dessenag]

Thank you for your reply. BIOS rev 1.42 Thinkpad X250 20CMS00U00 Intel i5-5200U with 16GB RAM. I have the Intel card for networking. I tried disabling bluetooth in bios, but still hanging on black screen after picker.

[dessenag]

Solved by disabling in bios the following:

• Intel (R) Rapid...: Disabled (under Power);
• Virtualization: Disabled both options, instead of just Vt-d.