Skip to content

Latest commit

 

History

History
36 lines (31 loc) · 1.75 KB

fp_readme.md

File metadata and controls

36 lines (31 loc) · 1.75 KB
Raw

RTG4 Development Kit FPGA Programming Files

This folder contains FlashPro Express (v12.3) projects for the RTG4 Development Kit Mi-V sample designs.

FlashPro Express

The programming files contained under this folder were exported from the designs in the Libero_Projects folder in this repository. Select the desired programming .job file and program your device using FlashPro Express.

Programming the Device using FlashPro Express

1. Open FlashPro Express
2. Select Project -> New Job Project from FlashPro Express Job   
3. Browse to the Job file using, "Browse ...". The Job files are located in
   the FlashPro_Express_Project/Programming_Files directory
4. Select the Job file, then select "Open"
5. Select the FlashPro_Express_Project/Programming_Files  as the project location
6. Connect the FPGA board to the computer using the FlashPro5 or Embedded FlashPro
7. Turn on the board and select "Refreash/Rescan Programmers"
8. Select the "RUN" button, status bar will change from IDLE to the percentage complete 
9. Once complete the status bar will display "1 PROGRAMMER(S) PASSED"

Design Features

The Libero designs include the following features:

  • A MIV_RV32IMA_L1_AHB or MIV_RV32IMA_L1_AXI soft RISC-V processor.
  • RISC-V debug block allowing on-target debug using SoftConsole.
  • The operating frequency of the design is 50MHz.
  • Target memory is LSRAM.
  • User peripherals (GPIO, Timers, UART).

The peripherals in this design are located at the following addresses.

Peripheral Address
CoreUARTapb 0x7000_1000
CoreGPIO_IN 0x7000_2000
CoreTimer_0 0x7000_3000
CoreTimer_1 0x7000_4000
CoreGPIO_OUT 0x7000_5000
LSRAM 0x8000_0000