ivi-wm.xml

<?xml version="1.0" encoding="UTF-8"?>
<protocol name="ivi_wm">

  <copyright>
    Copyright (C) 2017 Advanced Driver Information Technology Joint Venture GmbH

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.
  </copyright>

  <interface name="ivi_wm_screen" version="2">
    <description summary="controller interface to screen in ivi compositor"/>

    <request name="destroy" type="destructor">
      <description summary="destroy ivi_wm_screen">
        Request to destroy the ivi_wm_screen.
      </description>
    </request>

    <request name="clear">
      <description summary="remove all layers from screen render order">
        A screen has no content assigned to itself, it is a container for layers.
        This request removes all layers from the screen render order.
        Note: the layers are not destroyed, they are just no longer contained by
        the screen.
      </description>
    </request>

    <request name="add_layer">
      <description summary="add a layer to screen render order at nearest z-position">
        A screen has no content assigned to itself, it is a container for layers.
        This request adds a layers to the topmost position of the screen render order.
        The added layer will cover all other layers of the screen.
      </description>
      <arg name="layer_id" type="uint"/>
    </request>

    <request name="remove_layer">
      <description summary="remove a layer to screen render order">
        A screen has no content assigned to itself, it is a container for layers.
        This request removes a layer.
      </description>
      <arg name="layer_id" type="uint"/>
    </request>

    <request name="screenshot">
      <description summary="take screenshot of screen">
        An ivi_screenshot object is created which will receive the screenshot
        data of the specified output.
      </description>
      <!-- Version 2 additions -->
      <arg name="buffer" type="object" interface="wl_buffer"/>
      <arg name="screenshot" type="new_id" interface="ivi_screenshot"/>
    </request>

    <request name="get">
      <description summary="get a parameter of a screen in ivi compositor">
        After this request, compositor sends the requested parameter.
      </description>
      <arg name="param" type="int"/>
    </request>

    <event name="screen_id">
      <description summary="advertise server side id of the ivi-screen">
        Sent immediately after creating the ivi_wm_screen object.
      </description>
      <arg name="id" type="uint"/>
    </event>

    <event name="layer_added">
      <description summary="update render order of the screen">
        A layer is added to the render order lisf of the screen
      </description>
      <arg name="layer_id" type="uint"/>
    </event>

    <event name="connector_name">
      <description summary="advertise connector name of the corresponding output">
        Sent immediately after creating the ivi_wm_screen object.
      </description>
      <arg name="process_name" type="string"/>
    </event>

    <enum name="error">
       <entry name="no_layer" value="0"
              summary="the layer with given id does not exist"/>
       <entry name="no_screen" value="1"
              summary="the output is already destroyed"/>
       <entry name="bad_param" value="2"
              summary="the given parameter is not valid"/>
     </enum>

     <event name="error">
       <description summary="error event">
         The error event is sent out when an error has occurred.
       </description>
       <arg name="error" type="uint" summary="error code"/>
       <arg name="message" type="string" summary="error description"/>
     </event>
  </interface>

  <interface name="ivi_screenshot" version="2">
    <description summary="screenshot of an output or a surface">
      An ivi_screenshot object receives a single "done" or "error" event.
      The server will destroy this resource after the event has been send,
      so the client shall then destroy its proxy too.
    </description>

    <event name="done">
      <description summary="screenshot finished">
        This event notifies the filling data to buffer is done. The client
        can handle the buffer. This also provide the time of dumping data.
      </description>
      <!-- Version 2 updating -->
      <arg name="timestamp" type="uint" summary="timestamp in milliseconds"/>
    </event>

    <enum name="error">
      <entry name="io_error" value="0"
             summary="screenshot file could not be created"/>
      <entry name="not_supported" value="1"
             summary="screenshot can not be read"/>
      <entry name="no_output" value="2"
             summary="output has been destroyed"/>
      <entry name="no_surface" value="3"
             summary="surface has been destroyed"/>
      <entry name="no_content" value="4"
             summary="surface has no content"/>
      <!-- Version 2 additions -->
      <entry name="bad_buffer" value="5"
             summary="bad buffer input"/>
      <entry name="no_memory" value="6"
             summary="internal allocation failed"/>
    </enum>

    <event name="error">
      <description summary="error event">
        The error event is sent when the screenshot could not be created.
      </description>
      <arg name="error" type="uint" enum="error" summary="error code"/>
      <arg name="message" type="string" summary="error description"/>
    </event>
  </interface>

  <interface name="ivi_wm" version="2">
    <description summary="interface for ivi managers to use ivi compositor features"/>

    <request name="commit_changes">
      <description summary="commit all changes requested by client">
        All requests are not applied directly to scene object, so a controller
        can set different properties and apply the changes all at once.
        Note: there's an exception to this. Creation and destruction of
        scene objects is executed immediately.
      </description>
    </request>

    <request name="create_screen">
      <description summary="create a screen in ivi-compositor">
        Ask the ivi-wm to create a ivi-screen for given wl_output.
      </description>
      <arg name="output" type="object" interface="wl_output"/>
      <arg name="id" type="new_id" interface="ivi_wm_screen" summary="the new ivi-screen"/>
    </request>

    <request name="set_surface_visibility">
      <description summary="set the visibility of a surface in ivi compositor">
        If visibility argument is 0, the surface in the ivi compositor is set to invisible.
        If visibility argument is not 0, the surface in the ivi compositor is set to visible.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="visibility" type="uint"/>
    </request>

    <request name="set_layer_visibility">
      <description summary="set visibility of layer in ivi compositor">
        If visibility argument is 0, the layer in the ivi compositor is set to invisible.
        If visibility argument is not 0, the layer in the ivi compositor is set to visible.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="visibility" type="uint"/>
    </request>

    <request name="set_surface_opacity">
      <description summary="set the opacity of a surface in ivi compositor">
        The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="opacity" type="fixed"/>
    </request>

    <request name="set_layer_opacity">
      <description summary="set opacity of layer in ivi compositor">
        The valid range for opacity is 0.0 (fully transparent) to 1.0 (fully opaque).
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="opacity" type="fixed"/>
    </request>

    <request name="set_surface_source_rectangle">
      <description summary="set the scanout area of a surface in ivi compositor">
        The source rectangle defines the part of the surface content, that is used for
        compositing the surface. It can be used, if valid content of the surface is smaller
        than the surface. Effectively it can be used to zoom the content of the surface.
        If a parameter is less than 0, that value is not changed.
        x:      horizontal start position of scanout area within the surface
        y:      vertical start position of scanout area within the surface
        width:  width of scanout area within the surface
        height: height of scanout area within the surface
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </request>

    <request name="set_layer_source_rectangle">
      <description summary="set the scanout area of a layer in ivi compositor">
        The source rectangle defines the part of the layer content, that is used for
        compositing the screen. It can be used, if valid content of the layer is smaller
        than the layer. Effectively it can be used to zoom the content of the layer.
        If a parameter is less than 0, that value is not changed.
        x:      horizontal start position of scanout area within the layer
        y:      vertical start position of scanout area within the layer
        width:  width of scanout area within the layer
        height: height of scanout area within the layer
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </request>

    <request name="set_surface_destination_rectangle">
      <description summary="Set the destination area of a surface within a layer">
        The destination rectangle defines the position and size of a surface on a layer.
        The surface will be scaled to this rectangle for rendering.
        If a parameter is less than 0, that value is not changed.
        x:      horizontal start position of surface within the layer
        y:      vertical start position of surface within the layer
        width : width of surface within the layer
        height: height of surface within the layer
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </request>

    <request name="set_layer_destination_rectangle">
      <description summary="Set the destination area of a layer within a screen">
        The destination rectangle defines the position and size of a layer on a screen.
        The layer will be scaled to this rectangle for rendering.
        If a parameter is less than 0, that value is not changed.
        x:      horizontal start position of layer within the screen
        y:      vertical start position of layer within the screen
        width : width of surface within the screen
        height: height of surface within the screen
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </request>

    <enum name="sync">
      <description summary="sync request states">
      </description>
      <entry name="add"  value="0"/>
      <entry name="remove" value="1"/>
    </enum>

    <request name="surface_sync">
      <description summary="request to synchronize of a surface in ivi compositor">
        After this request, compositor sends the properties of the surface.
        If sync_state argument is 0, compositor sends the properties continously.
        If sync_state argument is not 0, compositor stops sending the properties
        continously.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="sync_state" type="int"/>
    </request>

    <request name="layer_sync">
      <description summary="request to synchronize of a layer in ivi compositor">
        After this request, compositor sends the properties of the layer.
        If sync_state argument is 0, compositor sends the properties continously.
        If sync_state argument is not 0, compositor stops sending the properties
        continously.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="sync_state" type="int"/>
    </request>

    <enum name="param" bitfield="true">
      <description summary="parameter types">
          The HMI controller can request different types of parameters of an
          ivi-object.
      </description>
      <entry name="opacity"   value="1"/>
      <entry name="visibility"  value="2"/>
      <entry name="size" value="4"/>
      <entry name="render_order" value="8"/>
    </enum>

    <request name="surface_get">
      <description summary="get a parameter of an ivi_layout_surface in ivi compositor">
        After this request, compositor sends the requested parameter.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="param" type="int"/>
    </request>

    <request name="layer_get">
      <description summary="get a parameter of an ivi_layout_layer in ivi compositor">
        After this request, compositor sends the requested parameter.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="param" type="int"/>
    </request>

    <request name="surface_screenshot">
      <description summary="take screenshot of surface">
        An ivi_screenshot object is created which will receive an image of the
        buffer currently attached to the surface with the given id. If there
        is no surface with such name the server will respond with an
        ivi_screenshot.error event.
      </description>
      <!-- Version 2 addition -->
      <arg name="buffer" type="object" interface="wl_buffer"/>
      <arg name="screenshot" type="new_id" interface="ivi_screenshot"/>
      <arg name="surface_id" type="uint"/>
    </request>

    <enum name="surface_type">
      <description summary="hint for the compositor">
        If a surface is restricted type, visible contents of the surface is strictly
        controlled by the compositor. Its content is not allowed to be go out of
        its destination region. If the application resizes its buffers or uses
        wp_viewporter protocol to scale its contents, the old destination region
        would causes visible glitches.
        To avoid these issues, the controller process mark a surface as desktop
        compatible. Source and destination regions of a desktop compatible
        surface will be modified accordingly,when application sends a request
        for resizing or scaling its contents. Therefore, applications contents
        will be drawn according to application's wishes.
        On the other hand, source and destination regions will be strictly
        enforced, when the surface's type is restricted. The default type for
        a surface is ivi.
      </description>
      <entry name="restricted"  value="0" summary="strictly controlled"/>
      <entry name="desktop"  value="1" summary="free to resize and scale"/>
    </enum>

    <request name="set_surface_type">
      <description summary="request to set a type for the surface in ivi compositor">
        After this request, compositor changes the type of the surface.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="type" type="int"/>
    </request>

    <request name="layer_clear">
      <description summary="remove all surfaces from layer render order">
        A layer has no content assigned to itself, it is a container for surfaces.
        This request removes all surfaces from the layer render order.
      </description>
      <arg name="layer_id" type="uint"/>
    </request>

    <request name="layer_add_surface">
      <description summary="add a surface to layer render order at nearest z-position">
        A layer has no content assigned to itself, it is a container for surfaces.
        This request adds a surface to the topmost position of the layer render order.
        The added surface will cover all other surfaces of the layer.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="surface_id" type="uint"/>
    </request>

    <request name="layer_remove_surface">
      <description summary="remove a surface from layer render order">
        A layer has no content assigned to itself, it is a container for surfaces.
        This request removes one surfaces from the layer render order.
        Note: the surface is not destroyed, it is just no longer contained by
        the layer.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="surface_id" type="uint"/>
    </request>

    <request name="create_layout_layer">
      <description summary="create an ivi_layout_layer in ivi compositor">
        After this request, compositor creates an ivi_layout_layer
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </request>

    <request name="destroy_layout_layer">
      <description summary="destroy an ivi_layout_layer in ivi compositor">
        After this request, compositor destroyes an existing ivi_layout_layer.
      </description>
      <arg name="layer_id" type="uint"/>
    </request>

    <event name="surface_visibility">
      <description summary="the visibility of the surface in ivi compositor has changed">
        The new visibility state is provided in argument visibility.
        If visibility is 0, the surface has become invisible.
        If visibility is not 0, the surface has become visible.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="visibility" type="int"/>
    </event>

    <event name="layer_visibility">
      <description summary="the visibility of the layer in ivi compositor has changed">
        The new visibility state is provided in argument visibility.
        If visibility is 0, the layer has become invisible.
        If visibility is not 0, the layer has become visible.
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="visibility" type="int"/>
    </event>

    <event name="surface_opacity">
      <description summary="the opacity of surface in ivi compositor has changed">
        The new opacity state is provided in argument opacity.
        The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="opacity" type="fixed"/>
    </event>

    <event name="layer_opacity">
      <description summary="the opacity of layer in ivi compositor has changed">
        The new opacity state is provided in argument opacity.
        The valid range for opactiy is 0.0 (fully transparent) to 1.0 (fully opaque).
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="opacity" type="fixed"/>
    </event>

    <event name="surface_source_rectangle">
      <description summary="the source rectangle of surface in ivi compositor has changed">
        The scanout region of the surface content has changed.
        The new values for source rectangle are provided by
        x:      new horizontal start position of scanout area within the surface
        y:      new vertical start position of scanout area within the surface
        width:  new width of scanout area within the surface
        height: new height of scanout area within the surface
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </event>

    <event name="layer_source_rectangle">
      <description summary="the source rectangle of layer in ivi compositor has changed">
        The scanout region of the layer content has changed.
        The new values for source rectangle are provided by
        x:      new horizontal start position of scanout area within the layer
        y:      new vertical start position of scanout area within the layer
        width:  new width of scanout area within the layer
        height: new height of scanout area within the layer
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </event>

    <event name="surface_destination_rectangle">
      <description summary="the destination rectangle of surface in ivi compositor has changed">
        The new values for source rectangle are provided by
        x:      new horizontal start position of surface within the layer
        y:      new vertical start position of surface within the layer
        width : new width of surface within the layer
        height: new height of surface within the layer
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </event>

    <event name="layer_destination_rectangle">
      <description summary="the destination rectangle of layer in ivi compositor has changed">
        The new values for source rectangle are provided by
        x:      new horizontal start position of layer within the screen
        y:      new vertical start position of layer within the screen
        width : new width of layer within the screen
        height: new height of layer within the screen
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="x" type="int"/>
      <arg name="y" type="int"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </event>

    <event name="surface_created">
      <description summary="ivi_layout_surface was created"/>
      <arg name="surface_id" type="uint"/>
    </event>

    <event name="layer_created">
      <description summary="ivi_layout_layer was created"/>
      <arg name="layer_id" type="uint"/>
    </event>

    <event name="surface_destroyed">
      <description summary="ivi_layout_surface was destroyed"/>
      <arg name="surface_id" type="uint"/>
    </event>

    <event name="layer_destroyed">
      <description summary="ivi_layout_layer was destroyed"/>
      <arg name="layer_id" type="uint"/>
    </event>

    <enum name="surface_error">
       <entry name="no_surface" value="0"
              summary="the surface with given id does not exist"/>
       <entry name="bad_param" value="1"
              summary="the given parameter is not valid"/>
       <entry name="not_supported" value="2"
              summary="the request is not supported"/>
     </enum>

     <event name="surface_error">
       <description summary="error event">
         The error event is sent out when an error has occurred.
       </description>
       <arg name="object_id" type="uint" summary="id of a layer or surface"/>
       <arg name="error" type="uint" summary="error code"/>
       <arg name="message" type="string" summary="error description"/>
     </event>

    <enum name="layer_error">
       <entry name="no_surface" value="0"
              summary="the surface with given id does not exist"/>
       <entry name="no_layer" value="1"
              summary="the layer with given id does not exist"/>
       <entry name="bad_param" value="2"
              summary="the given parameter is not valid"/>
     </enum>

     <event name="layer_error">
       <description summary="error event">
         The error event is sent out when an error has occurred.
       </description>
       <arg name="object_id" type="uint" summary="id of a layer or surface"/>
       <arg name="error" type="uint" summary="error code"/>
       <arg name="message" type="string" summary="error description"/>
     </event>

    <event name="surface_size">
      <description summary="the surface size in ivi compositor has changed">
        The client providing content for this surface modified size of the surface.
        The modified surface size is provided by arguments width and height.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="width" type="int"/>
      <arg name="height" type="int"/>
    </event>

    <event name="surface_stats">
      <description summary="receive updated statistics for surface in ivi compositor">
        The information contained in this event is essential for monitoring, debugging,
        logging and tracing support in IVI systems.
      </description>
      <arg name="surface_id" type="uint"/>
      <arg name="frame_count" type="uint"/>
      <arg name="pid" type="uint"/>
    </event>

    <event name="layer_surface_added">
      <description summary="update render order of the layer">
        A surface is added to the render order of the layer
      </description>
      <arg name="layer_id" type="uint"/>
      <arg name="surface_id" type="uint"/>
    </event>
  </interface>

</protocol>