bitcoin.conf-annotated.txt

###
### DRAFT DO NOT USE YET
### 


##
## bitcoin.conf configuration file. Lines beginning with # are comments.
##

## These settings are designed for Linode VPS see https://github.com/ChristopherA/Learning-Bitcoin-from-the-Command-Line

## Lines beginning with # are comments.
## Uncomment and edit options you wish to use, detailed guide here: https://en.bitcoin.it/wiki/Running_Bitcoin

### Enable incoming data connections

## To ensure your Fullnode validates transactions it is necessary to have both ‘upnp’ and ‘listen’ enabled.
## Note that many users will also need to enable Port Forwarding on their home router.
## To do this: go to your router’s page e.g. 192.168.0.1 in your browser then choose Advanced Settings
## Setup port forwarding on TCP/UDP 8333 to 8333 for the IP address of your Fullnode and Apply Changes
## If successful you will notice in time the number of connections increase above 8
## For more details see here: https://bitcoin.org/en/full-node#network-configuration
upnp=1

# Listening mode, enabled by default except when 'connect' is being used
listen=1

# Do not use Internet Relay Chat to find peers.
noirc=0

## Use this for Bitcoin development and blockchain analysis. Index mode is incompatible with prune=1.
# Note uncommenting this line will make Bitcoin rescan the whole blockchain which can takes several days
txindex=1

## Performance: Bandwidth and Memory usage

# Set the number of script verification threads (-2 to 16, 0 = auto, <0 = leave that many cores free, default: 0)
# A basic Linode has 4 cores, so set to 3.
par=1

# Set database cache size in megabytes (4 to 16384, default: 100). Lower is better when using Bitcoin
# with other apps running, but initial blockchain download is faster if you use more memory.
# Using Linode I suggest 1536 MB and optionally change to 256 after chain is complete.
dbcache=1536

# Send and receive complete blocks only, no loose transactions. blocksonly=1 can reduce bandwidth by 88%
blocksonly=1

# Max number of megabytes uploaded by node per day. 137MB is 144Mb, and is 1:1 ratio with downloading 1 day of blocks
maxuploadtarget=137

mempoolexpiry=72
maxmempool=300
maxorphantx=100

## To save disk space you can prune the blockchain to n MB below. Min value is 550. 0 means Pruning is disabled.
# Note if you prune before syncing, Bitcoin will still validate every block but it will only use up the max disk
# space specified below, deleting block data as it syncs. The node still relays transactions to other nodes when enabled.
#prune=550

## Spam protection
limitfreerelay=10
minrelaytxfee=0.0001

## Maximum number of inbound+outbound connections
# Consider setting this to 16-24 if you have issues
maxconnections=32

## Data directory for bitcoin, Use for external devices or if not using the default directory
# sample datadir=/home/media/USB/.bitcoin
# defaults are:
#        Linux:  ~/.bitcoin/
#    Macintosh:  ~/Library/Application Support/Bitcoin/
#      Windows:  %APPDATA%\Bitcoin
#           XP:  C:\Documents and Settings\YOURUSERNAME\Application data\Bitcoin
#    Vista & 7:  C:\Users\YOURUSERNAME\Appdata\Roaming\Bitcoin
#datadir=

#
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
#

# daemon=1 tells bitcoind to run in background and accept JSON-RPC commands
daemon=1

# server=1 tells Bitcoin-Qt to accept JSON-RPC commands.
# it is also read by bitcoind to determine if RPC should be enabled
server=1

# Bind to given address and always listen on it. Use [host]:port notation for IPv6
#bind=<addr>

# Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
#whitebind=<addr>

# Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
# This option can be specified multiple times (default: bind to all interfaces)
#rpcbind=<addr>

# If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
# is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used
# when the server and client are run as the same user.
#
# If not, you must set rpcuser and rpcpassword to secure the JSON-RPC api. The first
# method(DEPRECATED) is to set this pair for the server and client:
#rpcuser=Ulysseys
#rpcpassword=YourSuperGreatPasswordNumber_DO_NOT_USE_THIS_OR_YOU_WILL_GET_ROBBED_385593
#
# The second method `rpcauth` can be added to server startup argument. It is set at intialization time
# using the output from the script in share/rpcuser/rpcuser.py after providing a username:
#
# ./share/rpcuser/rpcuser.py alice
# String to be appended to bitcoin.conf:
# rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
# Your password:
# DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=

rpcauth=user1:376acdd3abf29a4ee9af8335b19feeef$dddf479610eb9e863a61cf0ef5e6189fb523b201bec3d5ce3940ecc9045242df

# On client-side, you add the normal user/password pair to send commands:
#rpcuser=alice
#rpcpassword=DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
#
# You can even add multiple entries of these to the server conf file, and client can use any of them:
# rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99

rpcuser=user1
rpcpassword=Nzkfa1oZ5_JKMMJ-VZkXJM56dmomSEB3JqAFByFWUFU=

# How many seconds Bitcoin will wait for a complete RPC HTTP request
# after the HTTP connection is established.
rpctimeout=30

# By default, only RPC connections from localhost are allowed.
# Specify as many rpcallowip= settings as you like to allow connections from other hosts,
# either as a single IPv4/IPv6 or with a subnet specification.

# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
# because the rpcpassword is transmitted over the network unencrypted.

#rpcallowip=10.1.1.34/255.255.255.0
#rpcallowip=1.2.3.4/24
#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96

# Listen for RPC connections on this TCP port:
#rpcport=8332 #Default port for mainnet
#rpcport=18332 #Default port for -testnet and -regtest — note this can confict!
#rpcport=18334 #Suggestion for first -regtest instance

# You can use bitcoin-qt or bitcoind to send commands to bitcoin-qt/bitcoind
# running on another host using this option:
#rpcconnect=127.0.0.1


# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
#rpcssl=1

# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem

### Bitcoin-related settings:

# Run on the test network instead of the real bitcoin network.
# Default directory is [system default bitcoin directory]/testnet/
testnet=1

# Run on a private #regression test network where you simulate mining
# your own blocks using the 'generate' command
# Default directory is [system default bitcoin directory]/regtest/
#regtest=1

# Connect via a socks proxy
#proxy=127.0.0.1:9050

# Select the version of socks proxy to use (4-5, default: 5)
#socks=5

# Use proxy to reach Tor hidden services (default: same as -proxy)
# See Issue 6 on Github for setup: https://github.com/MrChrisJ/fullnode/issues/6
#onlynet=tor
#onion=127.0.0.1:9050

# These are other Tor nodes that will help your node find peers
#seednode=nkf5e6b7pl4jfd4a.onion
#seednode=xqzfakpeuvrobvpj.onion
#seednode=tsyvzsqwa2kkf6b2.onion
# These lines help limit potential DOS attacks over Tor
#banscore=10000
#bantime=11

##############################################################
##            Quick Primer on addnode vs connect            ##
##  Let's say for instance you use addnode=4.2.2.4          ##
##  addnode will connect you to and tell you about the      ##
##    nodes connected to 4.2.2.4.  In addition it will tell ##
##    the other nodes connected to it that you exist so     ##
##    they can connect to you.                              ##
##  connect will not do the above when you 'connect' to it. ##
##    It will *only* connect you to 4.2.2.4 and no one else.##
##                                                          ##
##  So if you're behind a firewall, or have other problems  ##
##  finding nodes, add some using 'addnode'.                ##
##                                                          ##
##  If you want to stay private, use 'connect' to only      ##
##  connect to "trusted" nodes.                             ##
##                                                          ##
##  If you run multiple nodes on a LAN, there's no need for ##
##  all of them to open lots of connections.  Instead       ##
##  'connect' them all to one node that is port forwarded   ##
##  and has lots of connections.                            ##
##       Thanks goes to [Noodle] on Freenode.               ##
##############################################################

# Use as many addnode= settings as you like to attempt connection to specific p$
#addnode=69.164.218.197
#addnode=10.0.0.2:8333
addnode=10.0.1.3:8333

# or use as many connect= settings as you like to connect ONLY to specific peer$
#connect=69.164.218.197
#connect=192.168.1.20:8333

## Miscellaneous options

# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
#keypool=100

# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.01

## Transaction Fee Changes in 0.10.0

# Send transactions as zero-fee transactions if possible (default: 0)
#sendfreetransactions=0

# Create transactions that have enough fees (or priority) so they are likely to begin confirmation within n blocks (default: 1).
# This setting is over-ridden by the -paytxfee option.
#txconfirmtarget=n


## Debugging

# Add timestamps to debug.log
#logtimestamps=1

## User interface options for bitcoin-qt

# Start Bitcoin minimized
#min=1

# Minimize to the system tray
minimizetotray=0