Double click on the splice button

[mebitek]

After the upgrade to 1.2 if I double click the splice button seems do nothing. To enter the mode I need first to single click the button (white led on) then to double click it. is it correct?
thanks

[Clatters]

You can stil activate grains movement with a double click on the center button without directly entering the grains output page.
There may be misreadings due to your double-click speed, if that happens too fast or slow.
With the Grains page closed (white led off), try to double click and be sure to have your Grains knob all the way left (movement at maximum speed, so that they’ll be easily audible) and Resonance knob fully closed.
Then enter the Grain page with a single click (white led on) to actually have a visual response of what’s happening.

[mebitek]

I tried lot of double click speeds and I get nothing (version 1.1 was ok). I can actually enter with single ckick fo freeze grains and then double click

[Clatters]

That’s strange! Can you post here a small video of what’s happening so that we can have a better idea of what is going on? (Double click on the center button when still in LFOs page (white LED off) and then single-click to switch to Grains page)
Note that a double-click activates the grain movement, but you still have to single-click to actually have them on the outputs!

[mebitek]

here the video: https://imgur.com/a/EdzqDwk