Skip to content

Latest commit

 

History

History
51 lines (44 loc) · 3.05 KB

SamsungDishwasherReadme.md

File metadata and controls

51 lines (44 loc) · 3.05 KB
Raw

HubiThings Replica Samsung Dishwasher

NOTE: Some functions may not work. Samsung has chosen to disable non-SmartThings access (on certain devices) to Start, Pause, and Set Operation Time functions for "safety" reasons.

Link to SmartThings Article: https://community.smartthings.com/t/samsung-oven-apis-for-setting-cooking-mode-setpoint-cooking-time/251558/7?u=gutheinz

Remote control Note.

Remote control must be enabled on the washer panel prior to controlling the washer. The attributes will be correct regardless. You must follow the same pre-control procedures on this driver as you do for control via the SmartThings application.

General troubleshooting recommendations for HubiThings Replica devices.

  • Open the Hubitat Apps page and look at the parent-chile HubiThings Replica for any indications of issues. Expected result:
    • HubiThings Replica
    • HubiThings OAuth ea3-5122 : Authorized
  • Go to the SmartThings App and assure the failing function is working within that app.
    • If not, the issue is likely within SmartThings itself and further Hubitat troubleshooting is not warranted.
  • From the Hubitat Devices page, device's edit page,
    • Open a separate logging window
    • Select the device command "Configure". This will take about a minute to complete.
    • Review the log page for any WARNING or ERROR logs. If there are some, copy log page and send to the developer.
    • Go to the data section of the driver (or parent) and verify that critical data has passed to the device. If not, contact the developer.
    • Data (with first several characters as an example):
      • capabilities: {"components":[{"id": (this is a very large amount of data)
      • commands: {"replicaEvent":[{"name":
      • description: {"name":
      • replica: {"deviceId"
      • rules: {"version":1,"components":[{
      • triggers: {
  • Recheck problemmatic function:
    • Open NEW logging window
    • Execute problemmatic function and note exactly what the anomolous behavior is.
    • If fuction still fails, send Command Executed, anomolous behavior, and logs to developer.

Main Device Command Description:

  • Configure: Reloads and updates the device and child device configuration to current. Used as a first troubleshooting step.
  • Refresh: Request a full refresh of the device and then update to attributes.
  • Run: Start the washer.
    • Remote control must be enabled.
    • Attribute: machineState, value "run".
  • Pause: Pause the washer.
    • Remote control must be enabled.
    • Attribute: machineState, value "pause".
  • Stop: Stop the washer.
    • Remote control must be enabled.
    • Attribute: machineState, value "stop".

Appreciation:

Bloodtick_Jones: Development of a great SmartThings API interface app and supporting my peculiar needs.

Contributions

I do not take contributions for my developments. If you find the my integrations to be of value, you may make a donation to the charity of your choice or perform an act of kindness for a stranger!

Note: This readme will be updated as problems and resolutions are developed by users.