config.yml

# Denizen config.

Debug:
    # Whether debug information about Denizen should EVER appear in the server console by default
    # NOTE: You almost ALWAYS want this ON! Leave it at 'true'! To hide debug from scripts, set "debug: false" on the script containers that work fine.
    # Disabling this can prevent your logs from showing error messages and other important notices!
    Show: true
    # Whether the '/ex' command should tell you to check debug when you use it.
    Ex command help: true
    # Whether the '/ex' command should show debug by default. (if set to false, this inverts the '-q' option)
    Ex command debug: true
    # The max length of a line of debug output. Shorten this if your console is hard to read.
    Line length: 300
    # The max length of debug output. After this length, all further output will be cut off.
    Trim length limit: 1024
    # Whether to permit the "system.redirect_logging" mechanism
    Allow console redirection: false
    # Whether to send basic statistic information to the Denizen central server.
    # This is purely to maintain basic information on things like how many servers run any given version of Denizen.
    # Please do not disable this unless it is throwing errors (Please report any errors you receive as well).
    Stats: true
    # Whether to force the help command to be the default bukkit help (required to fix issues with command script help options).
    Override help: true
    # The default debug mode for script containers.
    # This should almost always be left at 'true'.
    Container default: true
    # How many debug messages can appear within the span of a single tick before they simply get blocked.
    # This is available as a backup safety feature to prevent debug output from crashing a server.
    # Set the value lower to better protect this, set the value higher to willfully debug a very very long script.
    Limit per tick: 5000
    # Whether to show extra 'verbose' info output (will FLOOD your console!).
    Verbose: false
    # Optional text to prefix all debug output.
    Prefix: ""
    # Whether to show full information about scripts being loaded (at startup and "/ex reload" usage).
    Show loading info: false
    # Whether to show deprecation warnings that are scheduled as future warnings.
    Show future warnings: false
    # Enable this to show a warning in logs when packets are sent asynchronously.
    # Async packets are largely unsupported with a few exceptions, but some plugins send them regardless.
    # This setting helps you catch those plugins if enabled.
    Warn on async packets: false

Scripts:
    World:
        Events:
            On player chats:
                # Whether to use the dangerous 'async' chat event (not recommended!)
                Use asynchronous event: false
            On time changes:
                Frequency of check: 250t
    Interact:
        # Default speed for interact script queues
        Queue speed: instant
    # Default speed for new queues (via run command usually)
    Queue speed: instant
    # What character encoding to use. 'default' indicates system default, 'utf8' is suggested as a preferred encoding in most cases.
    Encoding: utf8
    Command:
        # If set to 'true', the command scripts engine will automatically initialize when the server loads.
        # If false, it will only initialize once at least one command script is loaded.
        # This defaults to false to avoid any possible interference on servers that don't use command scripts.
        Auto init: false

# The default options for new Denizen NPCs

# Whether to spawn NPCs with given traits, and what settings to have by default
Traits:
    Health:
        Enabled: false
        # Whether to block drops from NPCs that have the health trait by default.
        Block drops: false
        Respawn:
            # Whether the health trait should control respawn by default.
            Enabled: false
            # How long after death before ethe NPC should respawn by default.
            Delay: 10s
        Animated death:
            # Whether the NPC should play a death animation by default.
            Enabled: false

# Whether triggers are on by default, and their individual settings
Triggers:
    Chat:
        Enabled: true
        Use asynchronous event: false
        # Note: cooldowns, ranges, etc. for all triggers should be edited in your script's "trigger" command, not in the config
        Cooldown: 2s
        Range: 3
        Overhearing range: 4
        Prerequisites:
            Must be looking in direction of NPC: true
            Must be able to see NPC: true
        Formats:
            Player to NPC: "You -> <npc.nickname>: <text>"
            Player to NPC overheard: "<player.name> -> <npc.nickname>: <text>"
        Appears globally:
            If triggers missing: true
            If triggers failed: true
            If NPC uninteractable: true
    Click:
        Enabled: true
        Cooldown: 2s
    Damage:
        Enabled: false
        Cooldown: 0.5s
    Proximity:
        Enabled: false
        Cooldown: 1s
        Range: 10

Commands:
    Engage:
        # the default timeout for engage, if not specifically set otherwise
        Timeout: 150s
    While:
        # how many times the WHILE command can loop before it gives up
        # Set to 0 for infinite
        Max loops: 10000
    Chat:
        # settings for the Chat command, these override Citizens2 settings
        Options:
            Multiple targets format: "%target%, %target%, %target%, and others"
            # set to -1 to disable bystanders overhearing, or 0 for all players on the server to hear
            Range for bystanders: 5.0
        Formats:
            No target: "[<[talker].name>]: <[message]>"
            To target: "[<[talker].name>] -> You: <[message]>"
            With target to bystanders: "[<[talker].name>] -> <[target].name>: <[message]>"
            With targets to bystanders: "[<[talker].name>] -> [<[targets]>]: <[message]>"
    CreateWorld:
        # Whether non-alphanumeric symbols are allowed in world names. Letters, numbers, unicode text, '-', '_', and ' ' are allowed always.
        # If this is changed to 'true', then other symbols like '/' can be used in a world name (effectively putting the world inside a subfolder).
        Allow symbols in names: false
    Delete:
        # Whether scripts are allowed to delete files from your server
        # This is mostly to clean up saves, but could potentially be abused.
        # Set to 'false' if you're worried about security.
        Allow file deletion: true
    Remove:
        # If set to true, the 'remove' command will always show a warning if it's removing all entities of a type from the world.
        # This is usually an intentional action, but can happen by mistake.
        # If entities are disappearing in groups unexpectedly, enable this config option to verify whether the 'remove' command is the source.
        Always warn on mass delete: false
    Restart:
        # Whether scripts are allowed to stop or restart your server.
        # This is usually only done intentionally, and quite identifiable if done on accident,
        # Though you may wish to disable this if your server is stopping and you don't know why,
        # or are just concerned about security in general.
        # Generally only restart should be on. Exception examples include a server manager system, which would restart
        # a server that stops more 'properly' than the restart command might.
        #
        # Note that it is still possible at this time to 'execute' a stop or restart instruction, which can be
        # blocked by blocking the commands themselves with the command event, like so: 'on stop|restart command'
        Allow server stop: false
        Allow server restart: true
    Filecopy:
        # Whether scripts are allowed to copy files across your server
        # Note that this could be abused by overwriting existing files.
        # Set to 'false' if you're worried about security.
        Allow copying files: true
    Log:
        # The log command writes to file, which is potentially dangerous
        # Set to 'false' if you're worried about security.
        Allow logging: true
    Yaml:
        # Whether the YAML command (or any other file-alteration command) is allowed to save outside the minecraft server folder.
        # Set to 'false' if you want good security.
        Allow saving outside folder: false
        # Optionally: set a limited path, where all edits must be contained to.
        # A good path to use for extra security is: plugins/Denizen/data/
        # Leave at "none" to disable this optional protection.
        Limit path: none
    Webget:
        # Whether to allow scripts to read arbitrary data from the web, which can also potentially enable tracking of your private server data.
        # Generally this is safe, but set to 'false' if you want very strict security.
        Allow: true
        # GENERAL SECURITY NOTE: Always run your server on a user with access to nothing but the minecraft folder
        # Otherwise, a bad script or plugin could potentially damage things (though being careful with these settings should reduce the risk of a script doing so)
        # ALSO: Always read scripts you download for anything suspicious looking, EG the log command, the file_delete mechanism, ...

Tags:
    # How long a tag can parse before force-closing the tag parser engine. Set to 0 to disable tag parse timing entirely.
    Timeout: 10
    # Whether the tag system should still timeout when debug is off.
    Timeout when silent: false
    # Rate between when slowed warnings appear (in milliseconds). This is used for minor warnings such as future-deprecation notices, to avoid error message flood.
    Warning rate: 10000
    # Settings for tags like cuboid.blocks, location.find.blocks, ...
    Block tags:
        # How many blocks can be read, max, before stopping the tag in place
        Max blocks: 1000000
    Chat history:
        # How many player messages will be stored for each player (<player.chat_history>, etc.)
        Max messages: 10

Saves:
    # How long (in seconds) before the offline player flag cache times out.
    # Set to -1 to keep offline player flags loaded perpetually, or to 0 to never cache.
    Offline player cache timeout: 300
    # When set to 'true', player data will be loaded offthread during the login sequence, to avoid adding load to the server while players join.
    Load async on login: true
    # When set to 'true', all automatic flag cleanups will be skipped.
    # This might save some processing time on servers that rarely use flag expirations, but otherwise should be left as 'false'.
    Skip flag cleaning: false

Packets:
    # Whether to allow Denizen to intercept packets from and to player clients.
    # This enables access to certain ScriptEvents, such as PlayerSteers and PlayerReceivesMessage.
    # It also enables hiding item script IDs and most likely has no real reason to be disabled.
    # Note that changing this setting requires a full server restart.
    Interception: true
    # Whether to automatically initialize the packet interceptor at startup.
    # If false, it will only initialize once at least one packet-interception command or event is used.
    # This defaults to false to avoid any possible interference on servers that don't need packet interception.
    # If this is false, some packet-interception related tags may not work.
    Auto init: false

# This is a special map of custom colors by name, for the '&' tag base to use. 'default' is used when the name is unrecognized. You can add extra keys here.
# Tags work here and will be pre-parsed at load time. RGB color codes work here.
Colors:
    base: <&2>
    emphasis: <&b>
    error: <red>
    warning: <yellow>
    default: <white>