You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Flysky sensor AVT01 is reported on DeviationTX as VoltX (type 0) sensor. It is an older type sensor, reported by FS-i6X as "Internal voltage". This is the same type as the internal receiver sensor for receiver voltage.
Flysky sensor CVT01 is reported on DeviationTX as CX (type 3) sensor. This one is reported by FS-i6X as "external Voltage"
They both show on DeviationTX telemetry screen with the correct voltage values.
But:
The alarm for the Cell Type voltage can be set only up to 5.0V, which is the correct value for the cell of the battery, but not for the CVT01 sensor which AFAIK can be +/- 100V.
Also, the alarm value for the VoltX type sensor is limited to 13,3V, so also not enough for i.e. 4S battery.
The text was updated successfully, but these errors were encountered:
To be more clear: can we populate the VBAT telemetry (1, 2, 3) first, despite of the sensor type (internal or external) and the remaining sensors to the subsequent CELL (1-6) telemetry voltages?
Flysky sensor AVT01 is reported on DeviationTX as VoltX (type 0) sensor. It is an older type sensor, reported by FS-i6X as "Internal voltage". This is the same type as the internal receiver sensor for receiver voltage.
Flysky sensor CVT01 is reported on DeviationTX as CX (type 3) sensor. This one is reported by FS-i6X as "external Voltage"
They both show on DeviationTX telemetry screen with the correct voltage values.
But:
The alarm for the Cell Type voltage can be set only up to 5.0V, which is the correct value for the cell of the battery, but not for the CVT01 sensor which AFAIK can be +/- 100V.
Also, the alarm value for the VoltX type sensor is limited to 13,3V, so also not enough for i.e. 4S battery.
The text was updated successfully, but these errors were encountered: