Issue in generating the XSA

[saravanj24]

Hi,

Recently we bought the Genesys ZU 5EV board. By using getting started guide link we tried experiment to build the vivado project to generate the XSA file.
We used the Vivado 2020.1 version.But we facing the issue(find in the attachment) when run the below command

source ../digilent-vivado-scripts/digilent_vivado_checkout.tcl

Error:[Board 49-71 The Board_part definition was not found for digilentinc.com:gzu_5ev:part1:0.]

In the example project the file project_info.tcl have the lines to set the board part property as like below.

set_property "board_part" "digilentinc.com:gzu_5ev:part0:1.0" $project_obj

With the available information in the blow link we include the board files to the viavado tool
https://digilent.com/reference/programmable-logic/guides/installing-vivado-and-vitis#install_digilent_s_board_files.

But still we face the above issue.

Is there any thing we missed in the Hw configuration project build steps?

Without this xsa we are not able proceed further to configure the petalinux project.

could you please help this to resolve this issue.

Thanks,
saravanan