Skip to content

Latest commit

 

History

History
694 lines (583 loc) · 17.2 KB

basic.md

File metadata and controls

694 lines (583 loc) · 17.2 KB
Raw

samples/basic

This sample demonstrates the basic testing capabilities of DrMock.

Table of contents

Project structure

samples/basic
│   CMakeLists.txt
│   Makefile
│   basicTest.cpp

Requirements

This project requires an installation of DrMock in build/install/ or a path container in the CMAKE_PREFIX_PATH variable. If your installation of DrMock is located elsewhere, you must change the value of CMAKE_PREFIX_PATH.

Setup

Recall that DrMock requires you to configure your project with CMake. The CMakeLists.txt is faily simple. To fullfil DrMock's requirement for C++17, do

set(CMAKE_CXX_STANDARD 17)

Next, find the package DrMock::DrMock.

find_package(DrMock)

This will fail if DrMock::DrMock cannot be found in the CMAKE_PREFIX_PATH. Make sure that DrMock is installed there, set the prefix in the Makefile (see below) or call cmake yourself with the -DCMAKE_PREFIX_PATH directive.

Finding the DrMock package automatically imports the macro drmock_test, which may be used to register tests.

enable_testing()
drmock_test(TESTS basicTest.cpp)

You could add further tests by providing addition arguments to the macro, like so:

drmock_test(TESTS
    test0.cpp
    test1.cpp
    # ...
)

Now lets take a look at the Makefile:

default:
  mkdir -p build && cd build && cmake .. -DCMAKE_PREFIX_PATH=../../build/install
  cd build && make -j$(num_threads) && ctest --output-on-failure

Nothing fancy here. Note the ctest call after building.

If you haven't already, set the CMAKE_PREFIX_PATH environment variable to the installation directory of the DrMock package. If you've done make && make install in the DrMock source folder and haven't moved build/install, the default CMAKE_PREFIX_PATH set in the Makefile is referencing the correct directory.

Source code

Time to look at some test code. Open basicTest.cpp!

DrMock/Test.h contains DrMock's test macros and must be included in every test source file. To open a new test, do

DRTEST_TEST(someTest)
{
  // ...
}

A source file name hold an arbitrary number of DRTEST_TEST(...) calls.

Assert and compare

Use DRTEST_ASSERT to check if an expression is true:

DRTEST_TEST(someTest)
{
  DRTEST_ASSERT(true);
  DRTEST_ASSERT(3 + 4 == 7);
}

To compare objects, use DRTEST_ASSERT_[...]:

DRTEST_TEST(anotherTest)
{
  // 3 + 4 == 7
  DRTEST_ASSERT_EQ(3 + 4, 7);
  // 7 > 6
  DRTEST_ASSERT_GT(7, 6);
  // 8 + 5 >= 13
  DRTEST_ASSERT_GE(8 + 5, 13);
  // - 3 < 0
  DRTEST_ASSERT_LT(-3, 0);
  // 9 <= 10
  DRTEST_ASSERT_LE(9, 10);
}

These macros will print the left- and right-hand side of the comparison in case of failure (if possible).

Exceptions

To check for exceptions, use

DRTEST_ASSERT_THROW(statement, exceptionType);

which executes statement and checks if an exception of type exceptionType is thrown:

DRTEST_TEST(exceptionTest)
{
  DRTEST_ASSERT_THROW(
      throw std::runtime_error{"foo"},
      std::runtime_error
    );

  // ...
}

If you wish, you can check multiple statements at once:

DRTEST_ASSERT_THROW(
    std::string str = "foo";
    str = "bar";
    throw std::runtime_error{str},
    std::runtime_error
  );

Observe that the statements are seperated by semicolons. The last statement of the first argument of DRTEST_ASSERT_THROW may or may not end with a ;.

To assert that certain tests fail, use DRTEST_ASSERT_TEST_FAIL:

DRTEST_ASSERT_TEST_FAIL(
    DRTEST_ASSERT(2 + 2 == 5);
  );

This macro may also be applied to multiple statements at once, using the same syntax as DRTEST_ASSERT_THROW.

Note.

DRTEST_ASSERT_TEST_FAIL(throw std::runtime_error{"foo"});

will cause the test to fail.

Test tables

Test data is organised in test tables. To initialize a test table for the test someTestWithTable, use

DRTEST_DATA(someTestWithTable)
{
  // ...
}

Columns and rows can be pushed to the table by using

drtest::addColumn<Type>("column_name");

For instance,

DRTEST_DATA(someTestWithTable)
{
  drtest::addColumn<int>("lhs");
  drtest::addColumn<int>("rhs");
  drtest::addColumn<int>("expected");
  drtest::addColumn<std::string>("randomStuff");

  // ...
}

adds three columns for integer entries ("lhs", "rhs" and "expected") and one for strings to the table. Make sure to provide a unique name for each column. The name must satisfy the same rules as all C++ variable names.

As of version 0.5, you can also use the utility function addColumns to get the same result:

DRTEST_DATA(someTestWithTable)
{
  drtest::addColumns<int, int, int, std::string>("lhs", "rhs", "expected", "randomStuff");

  // ...
}

After adding the columns, the drtest::addRow function may then be used to populate the table:

drtest::addRows(
    "row description",
    1stColumnEntry,
    2ndColumnEntry,
    ...
  );

For example:

DRTEST_DATA(someTestWithTable)
{
  // ...

  drtest::addRow(
      "Small numbers",  // Description of the row.
      3,  // lhs
      4,  // rhs
      7,  // expected
      std::string{"foo"}  // randomStuff
    );
  drtest::addRow(
      "Large numbers",
      1593,
      2478,
      4071,
      std::string{"bar"}
    );
  drtest::addRow(
      "This test will fail",
      2,
      2,
      5,
      std::string{"0>0"}
    );
}

Thus, the test table for someTestWithTable is initialized and populated. To access the table in the test, use

DRTEST_FETCH(Type, column_name)

Note the lack of double quote in column_name!

Thus, to get the test data from above, do

DRTEST_TEST(someTestWithTable)
{
  DRTEST_FETCH(int, lhs);
  DRTEST_FETCH(int, rhs);
  DRTEST_FETCH(int, expected);
  DRTEST_FETCH(std::string, randomStuff);

  // ...
}

Now you can use lhs, rhs, etc. as though they were C++ variables, and DrMock will execute all statements involving these for every row of the test table. For example,

DRTEST_TEST(someTestWithTable)
{
  // ...

  DRTEST_ASSERT_EQ(lhs + rhs, expected);
  DRTEST_ASSERT(randomStuff.size() > 2);
}

The first of these tests will check 3 + 4 == 7, 1593 + 2478 == 4071 and 2 + 2 == 5. In case of failure, each of these will be displayed as individual tests.

USING_DRTEST

If long macro names like DRTEST_ASSERT_EQ are impractical and you're certain that no collisions will result from this, you can #define USING_DRTEST to remove the DRTEST_ prefix from all DRTEST_* macros.

The following macros are impacted: DRTEST_FETCH, DRTEST_DATA, DRTEST_TEST, DRTEST_ASSERT, DRTEST_ASSERT_EQ, DRTEST_ASSERT_NE, DRTEST_ASSERT_LE, DRTEST_ASSERT_LT, DRTEST_ASSERT_GE, DRTEST_ASSERT_GT, DRTEST_ASSERT_THROW, DRTEST_ASSERT_TEST_FAIL, DRTEST_VERIFY_MOCK, DRTEST_ASSERT_ALMOST_EQUAL.

Like other using namespace ... directives, please use this one with caution!

Running the tests

Do make. This should yield the following:

    Start 1: basicTest
1/1 Test #1: basicTest ........................***Failed    0.00 sec
TEST   someTest
PASS   someTest
TEST   anotherTest
PASS   anotherTest
TEST   exceptionTest
PASS   exceptionTest
TEST   someTestWithTable, Small numbers
PASS   someTestWithTable, Small numbers
TEST   someTestWithTable, Large numbers
PASS   someTestWithTable, Large numbers
TEST   someTestWithTable, This test fails
*FAIL  someTestWithTable, This test fails (117):
    (lhs + rhs)
      4
    (expected ==)
      5

****************
1 FAILED


0% tests passed, 1 tests failed out of 1

Total Test time (real) =   0.01 sec

The following tests FAILED:
	  1 - basicTest (Failed)
Errors while running CTest
make: *** [default] Error 8

In the test source basicTest.cpp, all tests passed except one:

TEST   someTestWithTable, This test fails
*FAIL  someTestWithTable, This test fails (117):
    (lhs + rhs)
      4
    (expected ==)
      5

DrMock prints the failed test's name (someTestWithTable), the row of the failed subtest (This test will fail, if the test uses test tables), and the offending line (117). Furthermore, as the test used DRTEST_ASSERT_EQ, the objects that failed the comparison are printed, along with their variable name.

Change the test table so that the test check if 2 + 2 == 4 instead of 2 + 2 == 5 and run make again:

    Start 1: basicTest
1/1 Test #1: basicTest ........................   Passed    0.00 sec

100% tests passed, 0 tests failed out of 1

Total Test time (real) =   0.01 sec

Tags

As of version 0.5, DrMock offers xfail and skip tags for tests. A row can be tagged by appending the tag to the addRow call, or by calling tagRow seperately:

DRTEST_DATA(someTestWithTable)
{
  // ...

  drtest::addRow(
      "This test will be skipped",
      2,
      2,
      4,
      std::string{"..."},
      drtest::tags::skip
    );
  drtest::addRow(
      "This test is expected to fail",
      -2,
      -2,
      4,
      std::string{"0>0"}
    );
  drtest::tagRow("This test is expected to fail", drtest::tags::xfail);
}

Add the above to the file and run ctest with --verbose. You will see the following result:

test 1
    Start 1: basicTest

1: Test command: /Users/malte/drmock/samples/basic/build/basicTest
1: Test timeout computed to be: 10000000
1: TEST   someTest
1: PASS   someTest
1: TEST   anotherTest
1: PASS   anotherTest
1: TEST   exceptionTest
1: PASS   exceptionTest
1: TEST   someTestWithTable, Small numbers
1: PASS   someTestWithTable, Small numbers
1: TEST   someTestWithTable, Large numbers
1: PASS   someTestWithTable, Large numbers
1: TEST   someTestWithTable, This test fails
1: PASS   someTestWithTable, This test fails
1: TEST   someTestWithTable, This test will be skipped
1: SKIP   someTestWithTable, This test will be skipped
1: TEST   someTestWithTable, This test is expected to fail
1: XFAIL  someTestWithTable, This test is expected to fail (134): 
1:     (lhs + rhs) 
1:       -4
1:     (expected ==)
1:       4
1: 
1: ****************
1: ALL PASS
1/1 Test #1: basicTest ........................   Passed    0.00 sec

100% tests passed, 0 tests failed out of 1

Total Test time (real) =   0.01 sec

A test without a corresponding DRTEST_DATA(...) can also be skipped or xfailed by calling drtest::skip() or drtest::xfail(). Note that the placement of the call is important. Place drtest::xfail somewhere before the call or assertion that is expected to fail and drtest::skip at the point at which you want to skip to the next test:

DRTEST_TEST(...)
{
  /* statements */;  // These will be executed and may cause failure.
  drtest::skip();
  // This will not be executed.
}

Note that xfail currently exists the test after the first failure:

DRTEST_TEST(...)
{
  drtest::xfail();
  DRTEST_ASSERT_EQ(2 + 2, 5);
  /* Do something... */;  // Will not be executed!
}

Floating point comparison

As of version 0.5, DrMock offers a macro for floating point comparison, whose "signature" is the following:

template<typename T>
DRTEST_ASSERT_ALMOST_EQUAL(T actual, T expected)

We expect T to be float, double or long double. The macro performs the following check:

|actual - expected| <= abs_tol + rel_tol*|expected|

The values abs_tol and rel_tol are called absolute and relative tolerance, resp. They are, by default, equal to 1e-06, but may be set for an entire test file by #define-ing the macros DRTEST_ABS_TOL and DRTEST_REL_TOL resp., before including the master header Test.h:

#define DRTEST_ABS_TOL 1e-03
#define DRTEST_REL_TOL 0
#include "Test.h"

They may also be set for individual tests by using drtest::abs_tol and drtest::rel_tol functions inside the test (thus overriding the default or the definition using the #define directive). For example:

DRTEST_TEST(almost_equal_custom)
{
  DRTEST_ASSERT_ALMOST_EQUAL(0.000001f, 0.0f);  // Uses default/values set by #define.

  drtest::abs_tol(1.0);
  DRTEST_ASSERT_ALMOST_EQUAL(2.0 + 2.0, 5.0);

  // Note that this check is not a symmetric function in
  // `(actual, expected)`, unless `rel_tol` is zero.
  drtest::rel_tol(0.5);
  DRTEST_ASSERT_ALMOST_EQUAL(50.0, 100.0);
  DRTEST_ASSERT_TEST_FAIL(DRTEST_ASSERT_ALMOST_EQUAL(100.0, 50.0));
}

Caveats

Commas in macro arguments

The error

error: too many arguments provided to function-like macro invocation

can be caused by not properly isolating commas occuring in macro arguments. For example,

DRTEST_ASSERT(
    std::vector<int>{0, 1, 2}
    ==
    std::vector<int>{3, 4, 5}
  );

will throw this error. The macro will assume it is called with std::vector<int>{0 as first argument, 1 as second, etc. To solve this, use parens () to encapsulate these commas:

DRTEST_ASSERT(
    (std::vector<int>{0, 1, 2})
    ==
    (std::vector<int>{3, 4, 5})
  );

Implicit conversion in test tables

Implicit conversion doesn't work when adding rows to test tables. Attempting implicit conversion when calling drtest::addRow will result in a type mismatch error. For example,

drtest::addRow(
    "Small numbers",
    3,
    4,
    7,
    "foo"
  );

will raise such an error, as the fourth column's type is defined as std::string, yet a null-terminated C string was passed as argument.

Compile options, linking test executables and resource files

You may set the compile options of the test executables using the OPTIONS parameter of drmock_test. If OPTIONS is left undefined, the following default options are used: -Wall, -Werror, -g, -fPIC, -pedantic, -O0. For example, to compile only with -Wall and -Werror, do

drmock_test(
    TESTS
        test.cpp
    OPTIONS
        -Wall
        -Werror
)

To link the test executables against any number of target library, use the LIBS parameter (also described in the next section). For example, to link the test above against pthread, do

drmock_test(
    TESTS
        test.cpp
    LIBS
        pthread
    OPTIONS
        -Wall
        -Werror
)

The RESOURCE parameter may be used to add source files to the test executable:

drmock_test(
    TESTS
        test.cpp
    RESOURCES
        symbols.cpp
)

Maybe symbols.cpp contains symbols required by a header included in test.cpp. Another common use-case is that of including .qrc files (Qt resource files) to the executable if they are required by the test.

Test names

Any snake_case or camelCase name may be used for a test. Avoid any name containing DRTEST or DRMOCK, or ALL_CAPS in general.

By default, test functions are stored in the namespace test::. If this is inconvenient for you, you can redefine the namespace by setting the macro DRTEST_NAMESPACE before including Test.h:

#define DRTEST_NAMESPACE mytest
#include <DrMock/Test.h>

Row names

Any snake_case or camelCase name may be used as row name, with the exception of the emtpy string. Avoid any name containing DRTEST or DRMOCK, or ALL_CAPS in general.

Furthermore, duplicate row names are not allowed.

Implicit conversions of number types

Beware of implicit conversions when using the macros! For example, instead of

DRTEST_ASSERT_ALMOST_EQUAL(0.9, 1)

use

DRTEST_ASSERT_ALMOST_EQUAL(0.9, 1.0)

Otherwise, you might end up with an error similar to this one:

/Users/malte/drmock/tests/Test.cpp:347:3: error: no matching function for call to 'almostEqual'
  DRTEST_ASSERT_ALMOST_EQUAL(0.9, 1);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/malte/drmock/src/test/TestMacros.h:109:11: note: expanded from macro 'DRTEST_ASSERT_ALMOST_EQUAL'
  if (not drtest::almostEqual(actual, expected)) \
          ^~~~~~~~~~~~~~~~~~~
/Users/malte/drmock/src/test/Interface.tpp:46:1: note: candidate template ignored: deduced conflicting types for parameter 'T' ('double' vs. 'int')
almostEqual(T actual, T expected)
^