Installation / Productive setup / Deployment

Hardware & system setup

Current standard and tested setup is:

If not mentioned otherwise, setup instructions refer to this setup.

NO WARRANTIES AT ALL, BUT ESPECIALLY NOT ON ANY HARDWARE SETUP/CONNECTION/MODIFCATION!

Do a sudo apt update first.

1. Mount the MiniAmp on the GPIO header and the header to the Raspberry board, so that that unused GPIO Pins still can be used
1. Make a backup of config.txt file to your current directory: cp /boot/config.txt ./
1. Edit config.txt: sudo nano /boot/config.txt
1. Disable the line dtparam=audio=on to # dtparam=audio=on
1. Edit the line dtoverlay=vc4-kms-v3d to dtoverlay=vc4-kms-v3d,noaudio
1. Add lines dtoverlay=hifiberry-dac and force_eeprom_read=0 before the first filter section (cm4)

1. Connect DSI and power cables (to the GPIO header), official documentation on www.raspberrypi.com
1. I connected 5V to Pin 2/5V and Ground to Pin 14/Ground as I took Pin 6/Ground for the Power Switch (see next section)

1. Connect Power LED + to Pin 7/GPIO 4, Power LED - to Pin 9/Ground and the Power Switch cables over Pin 5/GPIO 3 and Pin 6/Ground
1. Edit config.txt: sudo nano /boot/config.txt (backup done in MiniAmp setup, if not do it now!)
1. Add lines dtoverlay=gpio-shutdown,gpio_pin=3 and gpio=4=op,dh before the first filter section (cm4)

1. Create a new directory for the repository: mkdir ~/raspifm_repo and switch to the directory: cd ~/raspifm_repo.
1. Clone the repository: git clone https://github.com/Drexel2k/raspiFM .
1. If you do not want to use the latest commit, but the latest release, look up the latest release tag: https://github.com/Drexel2k/raspiFM/releases or https://github.com/Drexel2k/raspiFM/tags and do: git checkout tags/v1.0

1. Copy spotifyd binary to /usr/bin: sudo cp ~/raspifm_repo/libs/spotifyd-0.3.5-dbus-pulse_aarch64 /usr/bin/spotifyd
1. Copy the spotifyd config file from configs to /etc: sudo cp ~/raspifm_repo/configs/spotifyd.conf /etc
1. Set up daemon: Copy the file from configs to /etc/systemd/system: sudo cp ~/raspifm_repo/configs/spotifyd.service /etc/systemd/user
1. Enable the daemon/autostart: systemctl --user enable spotifyd.service
1. Allow the spotifyd daemon to register services on the system DBus: Copy the file from configs to /usr/share/dbus-1/system.d: sudo cp ~/raspifm_repo/configs/spotifyd-dbus.conf /usr/share/dbus-1/system.d
1. Reboot

1. Install gui libraries and nginx for web interface: sudo apt install qt6-base-dev libqt6svg6-dev qt6-wayland nginx
1. Create directory for raspiFM files and set permissions: sudo mkdir -p /usr/bin/local/raspifm and set permissions: sudo chown raspifm:raspifm /usr/bin/local/raspifm
1. Add www-data user to raspifm group: sudo usermod -a -G raspifm www-data
1. Copy the raspiFM files to the directory: cp -r ~/raspifm_repo/src/. /usr/bin/local/raspifm
1. Setup python environment/dependencies:
- python3 -m venv /usr/bin/local/raspifm/.venv
- /usr/bin/local/raspifm/.venv/bin/python3 -m pip install -r ~/raspifm_repo/piprequirements.txt
- /usr/bin/local/raspifm/.venv/bin/python3 -m pip install ~/raspifm_repo/libs/PyQt6-6.6.1-cp38-abi3-manylinux_2_28_aarch64.whl
1. Setup nginx:
- sudo cp ~/raspifm_repo/configs/raspifm.nginx /etc/nginx/sites-available/raspifm
- sudo ln -s /etc/nginx/sites-available/raspifm /etc/nginx/sites-enabled/
1. To password protect the web interface see the comment in /etc/nginx/sites-available/raspifm, edit it with sudo nano /etc/nginx/sites-available/raspifm
1. Setup autostart for raspiFM:
- Create the autostart directory: mkdir -p ~/.config/autostart
- Copy the desktop file to the autostart directory: cp ~/raspifm_repo/configs/raspifm.desktop ~/.config/autostart
Reboot.