Nirvana NV14 with analog gimbals/potis

[tkilla77ffm]

Hello,
I would like to use analog gimbals or potis in my Nirvana NV14 instead of the hall gimbals.
It looks like there are connectors for CH1/CH2 and CH3/CH4 on board. I connected analog gimbals on those ports, with the serial port from the hall gimbals disconnected, but it didnt detect the analog gimbals. For some radios, after 70ms without detecting a hall gimbal,
it switches to analog reading.

can somebody help me out?

thnx a lot

[pfeerick]

You can try reverting this commit (d8237a9) / setting globalData.flyskygimbals = false;, as it is specifically overridden on the NV14, preventing the auto-detection from switching.

[pfeerick]

It is specially for the NV14, but based on the main branch - i.e. the development branch leading to v2.6.

[tkilla77ffm]

i understand, thank you

[tkilla77ffm]

hello peter,
i`m sorry to bother you again. The version you gave me dosnt work wright for a reason.
First of all, in this version, the touch screen is very sensitiv, a single touch causes somtimes multiple inputs.
Also, in this version, the analog inputs dosnt work. In the channel monitor, CH1 - CH4 is twitching around the center.
Calibrating doesnt work either, because the analog gimbals/input are not recognized.
Connecting the hall gimbals again (then boot up), the same problem occurs. Twitching around the center, no calibration possible.

with the latest nightly, the hall gimbals works fine after calibrating and the analog inputs are disabled.
But the touch screen is very sensitiv as well.

With the v2.5.0, everything works fine, exept the analog inputs which i want to use for a reason.

do you have any clou or idea?

[pfeerick]

The hall gimbals not working at all is to be expected, because changing that line to false basically disables them completely as autodetection code didn't work on NV14 anyway. Touch behaving differently is to be expected - is development branch build after all ;) Analog sticks not working, I have no idea atm - it may not be a simple change as NV14 was always hall effect sticks AFAIK, so everything specific to it will be coded for it with that in mind.

[tkilla77ffm]

i got it,
thanks again