Heatshift doesn't work with external thermostat

[dudu2082]

Hi guys. In last year I use heatshift if neccesery when HP was set by external temperature curves.
In this year i decide to try external thermostat to control HP + those curves. So if thermostat is on then HP control heating by heating curves.
But now I can't use heatshift (-5 to +5 C) to correct this curves.
I can set curves by sending json format command to change curves in mqtt.
Can this one could be fix to use heatshift with external thermostat connected to HP?

[IgorYbema]

It doesn't work due to the heatpump not supporting it. You can see the same behaviour when you try to shit using the Panasonic controller

[dudu2082]

It doesn't work due to the heatpump not supporting it. You can see the same behaviour when you try to shit using the Panasonic controller

On HP controller also I could't change it. So you
have a right. I thought that could be done by HeishaMon in some "magic" way.

[IgorYbema]

You can ofcourse change the setpoint and create some kind of shift that way.

[MiG-41]

@dudu2082 , You can send your "shifted" curve via SetCurves command , and HP will imidietly react on it ( also during work).