You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This is a follow-up on the post I made in the RomWBW repo. The IDE device is detected, but IDE0 and IDE1 are not. I read out the serial data from the Pico while it booted and it didn't report any errors. Below is the output. It specifies that IDE0 is open, but RomWBW says "NO MEDIA" for IDE0. When booting the RC2014, IO is logged also.
This is a follow-up on the post I made in the RomWBW repo. The IDE device is detected, but IDE0 and IDE1 are not. I read out the serial data from the Pico while it booted and it didn't report any errors. Below is the output. It specifies that IDE0 is open, but RomWBW says "NO MEDIA" for IDE0. When booting the RC2014, IO is logged also.
sd_spi_go_low_frequency: Actual frequency: 400000
V2-Version Card
R3/R7: 0x1aa
R3/R7: 0xff8000
R3/R7: 0xc0ff8000
Card Initialized: High Capacity Card
SD card initialized
SDHC/SDXC Card: hc_c_size: 29567
Sectors: 30277632
Capacity: 14784 MB
sd_spi_go_high_frequency: Actual frequency: 12000000
SD INIT OK
Ini file rc2014.ini Exists Loading ...
Loaded INI
IDE0 Open OK
Trace:1
OK lets start the z80 stuff
Listning for IDE activity...
Start?:
OK
io:1C00 Wr reg[07]->40 064
io:1C00 Wr reg[07]->40 064
io:0C00 Wr reg[03]->01 001
io:1C00 Wr reg[07]->40 064
io:0C00 Wr reg[03]->01 001
The text was updated successfully, but these errors were encountered: