Blueprints.lua

---@declare-global
--
-- Blueprint loading
--
--   During preloading of the map, we run loadBlueprints() from this file. It scans
--   the game directories and runs all .bp files it finds.
--
--   The .bp files call UnitBlueprint(), PropBlueprint(), etc. to define a blueprint.
--   All those functions do is fill in a couple of default fields and store off the
--   table in 'original_blueprints'.
--
--   Once that scan is complete, ModBlueprints() is called. It can arbitrarily mess
--   with the data in original_blueprints.
--
--   Finally, the engine registers all blueprints in original_blueprints to define the
--   "real" blueprints used by the game. A separate copy of these blueprints is made
--   available to the sim-side and user-side scripts.
--
-- How mods can affect blueprints
--
--   First, a mod can simply add a new blueprint file that defines a new blueprint.
--
--   Second, a mod can contain a blueprint with the same ID as an existing blueprint.
--   In this case it will completely override the original blueprint. Note that in
--   order to replace an original non-unit blueprint, the mod must set the "BlueprintId"
--   field to name the blueprint to be replaced. Otherwise the BlueprintId is defaulted
--   off the source file name. (Units don't have this problem because the BlueprintId is
--   shortened and doesn't include the original path).
--
--   Third, a mod can contain a blueprint with the same ID as an existing blueprint,
--   and with the special field "Merge = true". This causes the mod to be merged with,
--   rather than replace, the original blueprint.
--
--   Finally, a mod can hook the ModBlueprints() function which manipulates the
--   blueprints table in arbitrary ways.
--      1. create a file /mod/s.../hook/system/Blueprints.lua
--      2. override ModBlueprints(all_bps) in that file to manipulate the blueprints
--
-- Reloading of changed blueprints
--
--   When the disk watcher notices that a .bp file has changed, it calls
--   ReloadBlueprint() on it. ReloadBlueprint() repeats the above steps, but with
--   original_blueprints containing just the one blueprint.
--
--   Changing an existing blueprint is not 100% reliable; some changes will be picked
--   up by existing units, some not until a new unit of that type is created, and some
--   not at all. Also, if you remove a field from a blueprint and then reload, it will
--   default to its old value, not to 0 or its normal default.
--

local sub = string.sub
local gsub = string.gsub
local lower = string.lower
local getinfo = debug.getinfo
local here = getinfo(1).source

---@type BlueprintsTable
local original_blueprints
local current_mod

-- upvalue for performance
pcall = pcall
doscript = doscript
DiskFindFiles = DiskFindFiles

doscript("/lua/system/blueprints-ai.lua")
doscript("/lua/system/blueprints-lod.lua")
doscript("/lua/system/blueprints-projectiles.lua")
doscript("/lua/system/blueprints-units.lua")
doscript("/lua/system/blueprints-props.lua")
doscript("/lua/system/blueprints-weapons.lua")

---@class PreGameData
---@field CurrentMapDir string          ## is obsolete, set for removal
---@field IconReplacements ModInfo[]

--- Load in the pre game data that is defined in the lobby through the preference file.
---@return PreGameData?
local function LoadPreGameData()
    -- load in the prefs file
    local file = DiskFindFiles("/preferences", "Game.prefs")[1]
    if not file then
        WARN('Blueprints.lua - Preferences file is not found. Skipping pre game data.')
        return nil
    end

    -- try and load the pre game data of prefs file
    ---@type PreGameData
    local preGameData
    local ok, msg = pcall(
        function()
            local data = {}
            doscript(file, data)
            preGameData = data.PreGameData
        end
    )

    -- tell us if something went wrong
    if not ok then
        WARN("Blueprints.lua - Preferences file is locked or corrupt. Skipping pre game data.")
        WARN(msg)
    end

    return preGameData
end

---@class BlueprintIconAssignment
---@field BlueprintId BlueprintId
---@field IconSet? string
---@field TypeId? string

--- Attempts to assign icons to units if they exist
---@param units UnitBlueprint[] all unit blueprints
---@param assignments BlueprintIconAssignment[] A list of assignments
---@param identifier string The identifier of the UI mod that ensures compatibility when turned off (/textures/ui/game/common/strategicicons/identifier)
local function AssignIcons(units, assignments, identifier)
    local StringLower = string.lower

    ---@param units UnitBlueprint[]
    ---@param id string
    ---@param icon string
    local function AssignBlueprintId(units, id, icon)
        -- do not punish people for capitalization of unit database
        id = StringLower(id)

        -- check whether unit exists
        local unit = units[id]
        if unit then
            local path = identifier .. "/" .. icon
            unit.StrategicIconName =  path
        end
    end

    local function AssignTypeId(units, id, icon)
        -- todo :)
    end

    if assignments then
        for _, info in assignments do
            if info.BlueprintId and info.IconSet then
                AssignBlueprintId(units, info.BlueprintId, info.IconSet)
            elseif info.TypeId and info.Iconset then
                AssignTypeId(units, info.TypeId, info.IconSet)
            end
        end
    end
end


--- Creates a new basic environment that's safe for the UI to interact with
---@return table
local function NewSafeEnv()
    local env = {
        -- libraries
        table = table.copy(table),
        math = table.copy(math),
        string = table.copy(string),

        -- standard functions
        ipairs = ipairs,
        next = next,
        pairs = pairs,
        rawequal = rawequal,
        rawget = rawget,
        rawset = rawset,
        tonumber = tonumber,
        tostring = tostring,
        type = type,
        unpack = unpack,
        pcall = pcall,
        _VERSION = _VERSION,
        -- __pow = __pow,

        -- moholog-interacting functions
        _ALERT = _ALERT,
        -- _TRACEBACK = _TRACEBACK,
        LOG = LOG,
        SPEW = SPEW,
        WARN = WARN,
        assert = assert,
        error = error,

        -- core moho functions
        Basename = Basename,
        Dirname = Dirname,
        EnumColorNames = EnumColorNames,
        EulerToQuaternion = EulerToQuaternion,
        exists = exists,
        FileCollapsePath = FileCollapsePath,
        GetVersion = GetVersion,
        MATH_IRound = MATH_IRound,
        MATH_Lerp = MATH_Lerp,
        MinLerp = MinLerp,
        MinSlerp = MinSlerp,
        OrientFromDir = OrientFromDir,
        Rect = Rect,
        STR_GetTokens = STR_GetTokens,
        STR_Utf8Len = STR_Utf8Len,
        STR_Utf8SubString = STR_Utf8SubString,
        STR_itox = STR_itox,
        STR_xtoi = STR_xtoi,
        VAdd = VAdd,
        VDiff = VDiff,
        VDist2 = VDist2,
        VDist2Sq = VDist2Sq,
        VDist3 = VDist3,
        VDist3Sq = VDist3Sq,
        VDot = VDot,
        VMult = VMult,
        VPerpDot = VPerpDot,
        Vector = Vector,
        Vector2 = Vector2,

        -- representation functions
        repr = repr,
        reprs = reprs,
        reprsl = reprsl,
        repru = repru,

        -- utility functions
        iscallable = iscallable,
        printField = printField,
        safecall = safecall,
        Sort = Sort,
        sort_by = sort_by,
        sort_down_by = sort_down_by,
        sortedpairs = sortedpairs,
        StringCapitalize = StringCapitalize,
        StringComma = StringComma,
        StringEnds = StringEnds,
        StringExtract = StringExtract,
        StringJoin = StringJoin,
        StringPrepend = StringPrepend,
        StringReverse = StringReverse,
        StringSplit = StringSplit,
        StringSplitCamel = StringSplitCamel,
        StringStarts = StringStarts,
        StringStartsWith = StringStartsWith,
    }
    -- these can cause desyncs
    env.table.shuffle = nil
    env.table.random = nil
    env.math.random = nil
    -- add the same behavior for non-existent globals as usual
    setmetatable(env, getmetatable(_G))
    return env
end



--- Finds and applies custom strategic icons defined by UI mods
--- @param all_bps BlueprintsTable the table with all blueprint values
local function FindCustomStrategicIcons(all_bps)
    -- STRATEGIC ICON REPLACEMENT --

    -- try and load in pre game data
    local preGameData = LoadPreGameData()
    if preGameData and preGameData.IconReplacements then
        for _, info in preGameData.IconReplacements do
            -- data that is set in the lobby
            -- info.Name = mod.name 
            -- info.Author = mod.author 
            -- info.Location = mod.location
            -- info.Identifier = string.lower(utils.StringSplit(mod.location, '/')[2])
            -- info.UID = uid

            -- all the functionality that is available in the _icons.lua
            local state = NewSafeEnv()

            -- try to get the icons file
            local ok, msg = pcall(
                function()
                    doscript(info.Location .. "/mod_icons.lua", state)

                    -- syntax errors are caught internally and instead it just returns the table untouched
                    if not (state.UnitIconAssignments or state.ScriptedIconAssignments) then
                        error("Blueprints.lua - can not import the icon configuration file at '" .. info.Location .. "'. This could be due to missing functionality functionality or a parsing error.")
                    end
                end
            )

            -- if we can't, report it
            if not ok then
                WARN("Blueprints.lua - Unable to load icons from mod '" .. info.Name .. "' with uuid '" .. info.UID .. "'. Please inform the author: " .. info.Author)
                WARN(msg)
            end

            ok, msg = pcall (
                function()
                    -- scripted approach
                    if state.ScriptedIconAssignments then 
                        -- retrieve data, make sure it is a deepcopy to prevent ui mods messing with the original
                        local units = table.deepcopy(all_bps.Unit)
                        local projectiles = table.deepcopy(all_bps.Projectile)
                        local icons = DiskFindFiles(info.Location .. "/custom-strategic-icons", "*.dds")

                        -- find scripted icons and assign them
                        local scriptedIcons = state.ScriptedIconAssignments(units, projectiles, icons)
                        AssignIcons(all_bps.Unit, scriptedIcons, info.Identifier)

                        -- inform the dev
                        local n = table.getsize(scriptedIcons)
                        if n > 0 then
                            SPEW("Blueprints.lua - Found (" .. n .. ") scripted icon assignments in " .. info.Name .. " by " .. info.Author .. ".")
                        end
                    end

                    -- manual approach
                    if state.UnitIconAssignments then 
                        AssignIcons(all_bps.Unit, state.UnitIconAssignments, info.Identifier)

                        -- inform the dev
                        local n = table.getsize(state.UnitIconAssignments)
                        if n > 0 then 
                            SPEW("Blueprints.lua - Found (" .. n .. ") manual icon assignments in " .. info.Name .. " by " .. info.Author .. ".")
                        end
                    end
                end
            )

            -- if we can't, report it
            if not ok then
                WARN("Blueprints.lua - Unable to load icons from mod '" .. info.Name .. "' with uuid '" .. info.UID .. "'. Please inform the author: " .. info.Author)
                WARN(msg)
            end
        end
    end
end

local function InitOriginalBlueprints()
    current_mod = nil
    ---@class BlueprintsTable
    original_blueprints = {
        ---@type MeshBlueprint[]
        Mesh = {},
        ---@type UnitBlueprint[]
        Unit = {},
        ---@type PropBlueprint[]
        Prop = {},
        ---@type ProjectileBlueprint[]
        Projectile = {},
        ---@type TrailBlueprint[]
        TrailEmitter = {},
        ---@type EmitterBlueprint[]
        Emitter = {},
        ---@type BeamBlueprint[]
        Beam = {},
    }
end

local function GetSource()
    -- Find the first calling function not in this source file
    local n = 2
    local there
    while true do
        there = getinfo(n).source
        if there ~= here then break end
        n = n + 1
    end
    if sub(there, 1, 1) == "@" then
        there = sub(there, 2)
    end
    return DiskToLocal(there)
end

---@param group string
---@param bp Blueprint
local function StoreBlueprint(group, bp)
    local id = bp.BlueprintId
    local t = original_blueprints[group]

    if t[id] and bp.Merge then
        bp.Merge = nil
        bp.Source = nil
        t[id] = table.merged(t[id], bp)
    else
        t[id] = bp
    end
end

--- Figure out what to name this blueprint based on the name of the file it came from.
--- Returns the entire filename. Either this or SetLongId() should really be got rid of.
---@param bp Blueprint
local function SetBackwardsCompatId(bp)
    bp.Source = bp.Source or GetSource()
    bp.BlueprintId = lower(bp.Source)
end

--- Figure out what to name this blueprint based on the name of the file it came from.
--- Returns the full resource name except with ".bp" stripped off
---@param bp Blueprint
local function SetLongId(bp)
    bp.Source = bp.Source or GetSource()
    if not bp.BlueprintId then
        local id = lower(bp.Source)
        id = gsub(id, "%.bp$", "")                          -- strip trailing .bp
        --id = gsub(id, "/([^/]+)/%1_([a-z]+)$", "/%1_%2")    -- strip redundant directory name
        bp.BlueprintId = id
    end
end

--- Figure out what to name this blueprint based on the name of the file it came from.
--- Returns just the base filename, without any blueprint type info or extension. Used
--- for units only.
---@param bp Blueprint
local function SetShortId(bp)
    bp.Source = bp.Source or GetSource()
    bp.BlueprintId = bp.BlueprintId or
        gsub(lower(bp.Source), "^.*/([^/]+)_[a-z]+%.bp$", "%1")
end

--- If the bp contains a 'Mesh' section, move that over to a separate Mesh blueprint, and
--- point bp.MeshBlueprint at it.
---
--- Also fill in a default value for bp.MeshBlueprint if one was not given at all.
---@param bp Blueprint
function ExtractMeshBlueprint(bp)
    local disp = bp.Display or {}
    bp.Display = disp

    if disp.MeshBlueprint == '' then
        LOG('Warning: ', bp.Source, ': MeshBlueprint should not be an empty string')
        disp.MeshBlueprint = nil
    end

    if type(disp.MeshBlueprint) == 'string' then
        if disp.MeshBlueprint ~= lower(disp.MeshBlueprint) then
            --Should we allow mixed-case blueprint names?
            --LOG('Warning: ', bp.Source, ' (MeshBlueprint): ', 'Blueprint IDs must be all lowercase')
            disp.MeshBlueprint = lower(disp.MeshBlueprint)
        end

        -- strip trailing .bp
        disp.MeshBlueprint = gsub(disp.MeshBlueprint, "%.bp$", "")

        if disp.Mesh then
            LOG('Warning: ', bp.Source, ' has mesh defined both inline and by reference')
        end
    end

    if disp.MeshBlueprint == nil then
        -- For a blueprint file "/units/uel0001/uel0001_unit.bp", the default
        -- mesh blueprint is "/units/uel0001/uel0001_mesh"
        local meshname,subcount = gsub(bp.Source, "_[a-z]+%.bp$", "_mesh")
        if subcount == 1 then
            disp.MeshBlueprint = meshname
        end

        if type(disp.Mesh) == 'table' then
            local meshbp = disp.Mesh
            meshbp.Source = meshbp.Source or bp.Source
            meshbp.BlueprintId = disp.MeshBlueprint
            -- roates:  Commented out so the info would stay in the unit BP and I could use it to precache by unit.
            -- disp.Mesh = nil
            MeshBlueprint(meshbp)
        end
    end
end

function ExtractWreckageBlueprint(bp)
    local meshid = bp.Display.MeshBlueprint
    if not meshid then return end

    local meshbp = original_blueprints.Mesh[meshid]
    if not meshbp then return end

    local wreckbp = table.deepcopy(meshbp)
    if wreckbp.LODs then
        for _, lod in wreckbp.LODs do
            if  lod.ShaderName == 'TMeshAlpha' or
                lod.ShaderName == 'NormalMappedAlpha' or
                lod.ShaderName == 'UndulatingNormalMappedAlpha'
            then
                lod.ShaderName = 'BlackenedNormalMappedAlpha'
            else
                lod.ShaderName = 'Wreckage'
                lod.SpecularName = '/env/common/props/wreckage_noise.dds'
            end
        end
    end
    wreckbp.BlueprintId = meshid .. '_wreck'
    bp.Display.MeshBlueprintWrecked = wreckbp.BlueprintId
    MeshBlueprint(wreckbp)
end

local aeonBuildNoAnimation = "AeonBuildNoAnimation"

--- Allows us to specify build shaders on a per-unit basis
local uniqueBuildAnimations = {}
uniqueBuildAnimations["ual0401"] = aeonBuildNoAnimation
uniqueBuildAnimations["uas0401"] = aeonBuildNoAnimation

--- Extracts the build mesh blueprint information. Adds the Display.BuildMeshBlueprint field to the blueprint and registers the build mesh.
---@param bp UnitBlueprint The blueprint to generate the build mesh for.
function ExtractBuildMeshBlueprint(bp)
    local FactionName = bp.General.FactionName
    local isSubCommander = false

    if bp.Categories then
        for _, v in bp.Categories do
            if v == 'SUBCOMMANDER' then
                isSubCommander = true
                break
            end
        end
    end

    -- determine build mesh blueprint and add it to the game
    if FactionName == 'Aeon' or FactionName == 'UEF' or FactionName == 'Cybran' or FactionName == 'Seraphim' then
        -- no reason to have a build mesh if you have no mesh at all
        local meshid = bp.Display.MeshBlueprint
        if not meshid then return end

        -- no reason to have a build mesh if regular mesh is not defined properly
        local meshbp = original_blueprints.Mesh[meshid]
        if not meshbp then return end

        -- default shader name
        local shadername = FactionName .. 'Build'

        -- shader for specific unit BPs
        shadername = uniqueBuildAnimations[string.lower(bp.BlueprintId)] or shadername

        -- shader for specific SACUs
        if isSubCommander and FactionName == 'Aeon' then
            shadername = aeonBuildNoAnimation
        end

        -- build effects
        local secondaryname = '/textures/effects/' .. FactionName .. 'BuildSpecular.dds'

        -- copy over original content and switch up elements
        local buildmeshbp = table.deepcopy(meshbp)
        if buildmeshbp.LODs then
            for _, lod in buildmeshbp.LODs do
                lod.ShaderName = shadername
                lod.SecondaryName = secondaryname
                if FactionName == 'Seraphim' then
                    lod.LookupName = '/textures/environment/Falloff_seraphim_lookup.dds'
                end
            end
        end

        -- set its blueprint id and register it
        buildmeshbp.BlueprintId = meshid .. '_build'
        bp.Display.BuildMeshBlueprint = buildmeshbp.BlueprintId
        MeshBlueprint(buildmeshbp)
    end
end

---@param bp MeshBlueprint
function MeshBlueprint(bp)
    -- fill in default values
    SetLongId(bp)
    StoreBlueprint('Mesh', bp)
end

---@param bp UnitBlueprint
function UnitBlueprint(bp)
    -- save info about mods that changed this blueprint
    bp.Mod = current_mod
    SetShortId(bp)
    StoreBlueprint('Unit', bp)
end

---@param bp PropBlueprint
function PropBlueprint(bp)
    SetBackwardsCompatId(bp)
    StoreBlueprint('Prop', bp)
end

---@param bp ProjectileBlueprint
function ProjectileBlueprint(bp)
    -- save info about mods that changed this blueprint
    bp.Mod = current_mod
    SetBackwardsCompatId(bp)
    StoreBlueprint('Projectile', bp)
end

---@param bp TrailBlueprint
function TrailEmitterBlueprint(bp)
    SetBackwardsCompatId(bp)
    StoreBlueprint('TrailEmitter', bp)
end

---@param bp EmitterBlueprint
function EmitterBlueprint(bp)
    SetBackwardsCompatId(bp)
    StoreBlueprint('Emitter', bp)
end

---@param bp BeamBlueprint
function BeamBlueprint(bp)
    SetBackwardsCompatId(bp)
    StoreBlueprint('Beam', bp)
end

function ExtractAllMeshBlueprints()
    for _, bp in original_blueprints.Unit do
        ExtractMeshBlueprint(bp)
        ExtractWreckageBlueprint(bp)
        ExtractBuildMeshBlueprint(bp)
    end

    for _, bp in original_blueprints.Prop do
        ExtractMeshBlueprint(bp)
        ExtractWreckageBlueprint(bp)
    end

    for _, bp in original_blueprints.Projectile do
        ExtractMeshBlueprint(bp)
    end
end

---@param blueprints BlueprintsTable
function RegisterAllBlueprints(blueprints)
    local function RegisterGroup(g, fun)
        for id in sortedpairs(g) do
            fun(g[id])
        end
    end

    RegisterGroup(blueprints.Mesh, RegisterMeshBlueprint)
    RegisterGroup(blueprints.Unit, RegisterUnitBlueprint)
    RegisterGroup(blueprints.Prop, RegisterPropBlueprint)
    RegisterGroup(blueprints.Projectile, RegisterProjectileBlueprint)
    RegisterGroup(blueprints.TrailEmitter, RegisterTrailEmitterBlueprint)
    RegisterGroup(blueprints.Emitter, RegisterEmitterBlueprint)
    RegisterGroup(blueprints.Beam, RegisterBeamBlueprint)
end

-- Brute51 - Adding support for SCU presets: allows building units that get enhancements at the factory, so no need to enhance
-- after building SCU.
---@param bps UnitBlueprint[]
---@param all_bps BlueprintsTable
function HandleUnitWithBuildPresets(bps, all_bps)
    -- hashing sort categories for quick lookup
    local sortCategories = { ['SORTOTHER'] = true, ['SORTINTEL'] = true, ['SORTSTRATEGIC'] = true, ['SORTDEFENSE'] = true, ['SORTECONOMY'] = true, ['SORTCONSTRUCTION'] = true, }

    local tempBp = {}

    for _, bp in bps do
        for name, preset in bp.EnhancementPresets do
            -- start with clean copy of the original unit BP
            tempBp = table.deepcopy(bp)

            -- create BP table for the assigned preset with required info
            tempBp.EnhancementPresetAssigned = {
                Enhancements = table.deepcopy(preset.Enhancements),
                Name = name,
                BaseBlueprintId = bp.BlueprintId,
            }

            -- change cost of the new unit to match unit base cost + preset enhancement costs. An override is provided for cases where this is not desired.
            local e, m, t = 0, 0, 0
            if not preset.BuildCostEnergyOverride or not preset.BuildCostMassOverride or not preset.BuildTimeOverride then
                for _, enh in preset.Enhancements do
                    -- replaced continue by reversing if statement
                    if tempBp.Enhancements[enh] then
                        e = e + (tempBp.Enhancements[enh].BuildCostEnergy or 0)
                        m = m + (tempBp.Enhancements[enh].BuildCostMass or 0)
                        t = t + (tempBp.Enhancements[enh].BuildTime or 0)
                        -- HUSSAR added name of the enhancement so that preset units cannot be built
                        -- if they have restricted enhancement(s)
                        tempBp.CategoriesHash[enh] = true -- hashing without changing case of enhancements
                    else
                        WARN('*DEBUG: Enhancement ' .. repr(enh) .. ' used in preset ' .. repr(name) .. ' for unit ' .. repr(tempBp.BlueprintId) .. ' does not exist')
                    end
                end
            end
            tempBp.Economy.BuildCostEnergy = preset.BuildCostEnergyOverride or (tempBp.Economy.BuildCostEnergy + e)
            tempBp.Economy.BuildCostMass = preset.BuildCostMassOverride or (tempBp.Economy.BuildCostMass + m)
            tempBp.Economy.BuildTime = preset.BuildTimeOverride or (tempBp.Economy.BuildTime + t)

            -- adjust veterancy so that it is as easy to vet with preset SCUs as upgraded SCUs
            if not bp.VeteranMass then
                -- blueprints-units.lua gives a default multiplier of 2 for SUBCOMMANDER category units.
                tempBp.VeteranMassMult = (tempBp.VeteranMassMult or 2) * bp.Economy.BuildCostMass / tempBp.Economy.BuildCostMass
            end

            -- teleport cost adjustments. Manually enhanced SCU with teleport is cheaper than a prebuild SCU because the latter has its cost
            -- adjusted (up). This code sets bp values used in the code to calculate with different base values than the unit cost.
            if preset.TeleportNoCostAdjustment ~= false then
                -- set teleport cost overrides to cost of base unit
                tempBp.Economy.TeleportEnergyCost = bp.Economy.BuildCostEnergy or 0
                tempBp.Economy.TeleportMassCost = bp.Economy.BuildMassEnergy or 0
            end

            -- Add a sorting category so similar SCUs are grouped together in the build menu
            if preset.SortCategory then
                if sortCategories[preset.SortCategory] or preset.SortCategory == 'None' then
                    for k in sortCategories do
                        tempBp.CategoriesHash[k] = false
                    end
                    if preset.SortCategory ~= 'None' then
                        tempBp.CategoriesHash[preset.SortCategory] = true
                    end
                end
            end

            -- change other things relevant things as well
            tempBp.BaseBlueprintId = tempBp.BlueprintId
            tempBp.BlueprintId = string.lower(tempBp.BlueprintId .. '_' .. name)
            tempBp.BuildIconSortPriority = preset.BuildIconSortPriority or tempBp.BuildIconSortPriority or 0
            tempBp.General.SelectionPriority = preset.SelectionPriority or tempBp.General.SelectionPriority or 1
            tempBp.General.UnitName = preset.UnitName or tempBp.General.UnitName
            tempBp.Interface = tempBp.Interface or { }
            tempBp.Interface.HelpText = preset.HelpText or tempBp.Interface.HelpText
            tempBp.Description = preset.Description or tempBp.Description
            tempBp.CategoriesHash['ISPREENHANCEDUNIT'] = true
            tempBp.CategoriesHash[string.upper(name .. 'PRESET')] = true
            -- clean up some data that's not needed anymore
            tempBp.CategoriesHash['USEBUILDPRESETS'] = false
            tempBp.EnhancementPresets = nil
            -- synchronizing Categories with CategoriesHash for compatibility
            tempBp.Categories = table.unhash(tempBp.CategoriesHash)

            all_bps.Unit[tempBp.BlueprintId] = tempBp

            BlueprintLoaderUpdateProgress()
        end
    end
end

function HandleUnitsWithExternalFactories(bps, all_bps)

end

-- Assign shader and mesh for visual Cloaking FX
---@param bp UnitBlueprint
function ExtractCloakMeshBlueprint(bp)
    local meshid = bp.Display.MeshBlueprint
    if not meshid then return end

    local meshbp = original_blueprints.Mesh[meshid]
    if not meshbp then return end

    local shadernameE = 'ShieldCybran'
    local shadernameA = 'ShieldAeon'
    local shadernameC = 'ShieldCybran'
    local shadernameS = 'ShieldAeon'

    local cloakmeshbp = table.deepcopy(meshbp)
    if cloakmeshbp.LODs then
        for _, cat in bp.Categories do
            if cat == 'UEF' or cat == 'CYBRAN' then
                for _, lod in cloakmeshbp.LODs do
                    lod.ShaderName = shadernameE
                end
            elseif cat == 'AEON' or cat == 'SERAPHIM' then
                for _, lod in cloakmeshbp.LODs do
                    lod.ShaderName = shadernameA
                end
            end
        end
    end
    cloakmeshbp.BlueprintId = meshid .. '_cloak'
    bp.Display.CloakMeshBlueprint = cloakmeshbp.BlueprintId
    MeshBlueprint(cloakmeshbp)
end


--- Adapts all unit blueprints before they're passed onto mods.
---@param all_bps BlueprintsTable All the blueprints of the game.
function PreModBlueprints(all_bps)
    for _, bp in all_bps.Unit do
        ExtractCloakMeshBlueprint(bp)

        -- Units with no categories are skipped
        if bp.Categories then

            -- Construct hash-based categories
            bp.CategoriesHash = table.hash(bp.Categories)

            -- Allow to add or delete categories for mods
            if bp.DelCategories then
                for _, v in bp.DelCategories do
                    bp.CategoriesHash[v] = false
                end
                bp.DelCategories = nil
            end

            if bp.AddCategories then
                for _, v in bp.AddCategories do
                    bp.CategoriesHash[v] = true
                end
                bp.AddCategories = nil
            end

            -- Build range overlay
            if bp.CategoriesHash.ENGINEER then -- show build range overlay for engineers
                if not bp.AI then bp.AI = {} end
                bp.AI.StagingPlatformScanRadius = (bp.Economy.MaxBuildDistance or 5) + 2
                if not (bp.CategoriesHash.POD or bp.CategoriesHash.INSIGNIFICANTUNIT) then -- excluding Build Drones
                    bp.CategoriesHash.OVERLAYMISC = true
                end
            end

            -- Add common category values for easier lookup

            -- Add tech category
            for _, category in {'EXPERIMENTAL', 'SUBCOMMANDER', 'COMMAND', 'TECH1', 'TECH2', 'TECH3'} do
                if bp.CategoriesHash[category] then
                    bp.TechCategory = category
                    break
                end
            end

            -- Add layer category
            for _, category in {'LAND', 'AIR', 'NAVAL'} do
                if bp.CategoriesHash[category] then
                    bp.LayerCategory = category
                    break
                end
            end

            -- Add faction category
            bp.FactionCategory = string.upper(bp.General.FactionName or 'Unknown')

            -- Adjust weapon blueprints
            for i, w in bp.Weapon or {} do
                -- add in weapon blueprint id
                local label = w.Label or "Unlabelled"
                w.BlueprintId = bp.BlueprintId .. "-" .. i .. "-" .. label
            end

            -- Hotfix for naval wrecks
            if bp.CategoriesHash.NAVAL and not bp.Wreckage then
                bp.Wreckage = {
                    Blueprint = '/props/DefaultWreckage/DefaultWreckage_prop.bp',
                    EnergyMult = 0,
                    HealthMult = 0.9,
                    MassMult = 0.9,
                    ReclaimTimeMultiplier = 1,
                    WreckageLayers = {
                        Air = false,
                        Land = false,
                        Seabed = true,
                        Sub = true,
                        Water = true,
                    },
                }
            end

            -- Synchronize hashed categories with actual categories
            bp.Categories = table.unhash(bp.CategoriesHash)
        end

        BlueprintLoaderUpdateProgress()
    end
end

-- Hook for mods to manipulate the entire blueprint table
---@param all_bps BlueprintsTable
function ModBlueprints(all_bps)
end

local NewDummies = {}

local function GetFoot(bp, axe) return math.ceil(bp.Footprint and bp.Footprint[axe] or bp[axe] or 1) end
local function GetSkirt(bp, axe) return math.max((bp.Physics and bp.Physics['Skirt'..axe] or 1), GetFoot(bp, axe)) end
local function GetOffset(bp, axe) return (bp.Physics and bp.Physics['SkirtOffset'..axe] or 0) end

local function ReduceFoot(val)
    local modded = math.mod(val, 2)
    return modded == 0 and 2 or modded
end

local function NewOffset(offset, foot, reduced)
    return offset-(foot-reduced)/2
end

local function SpawnMenuDummyChanges(all_bps)
    for id, bp in pairs(all_bps) do

        -- allow all mobile units to be dragged while being built
        if bp.Categories and table.find(bp.Categories, 'MOBILE') then
            table.insert(bp.Categories, 'DRAGBUILD')
        end

        if bp.Physics and bp.Physics.MotionType ~= 'RULEUMT_Air' then
            local FootX, FootZ = GetFoot(bp, 'SizeX'), GetFoot(bp, 'SizeZ')
            local SkirtX, SkirtZ = GetSkirt(bp, 'SizeX'), GetSkirt(bp, 'SizeZ')
            local ReducedFootX, ReducedFootZ = ReduceFoot(FootX), ReduceFoot(FootZ)

            local SOffsetX, SOffsetZ = NewOffset(GetOffset(bp, 'X'), FootX, ReducedFootX), NewOffset(GetOffset(bp, 'Z'), FootZ, ReducedFootZ)

            local DummyID = 'spawn_dummy_'..SkirtX..SkirtZ..'_'..SOffsetX..SOffsetZ..'_'..ReducedFootX..ReducedFootZ


            if not NewDummies[DummyID] then
                NewDummies[DummyID] = {
                    BlueprintId = DummyID,
                    Categories = {
                        'DRAGBUILD',
                        'UNSPAWNABLE',
                    },
                    Display = {
                        BuildMeshBlueprint = '/meshes/game/nil_mesh',
                        MeshBlueprint = '/meshes/game/nil_mesh',
                        UniformScale = 0,
                        HideLifebars = true,
                    },
                    Intel = {
                        WaterVisionRadius = 0,
                    },
                    Physics = {
                        SkirtOffsetX = SOffsetX,
                        SkirtOffsetZ = SOffsetZ,
                        SkirtSizeX = SkirtX,
                        SkirtSizeZ = SkirtZ,
                        MotionType = 'RULEUMT_Air',
                        MaxSpeed = 0.5,
                    },
                    --ScriptClass = 'BrewLANFootprintDummyUnit',
                    --ScriptModule = '/lua/defaultunits.lua',
                    SizeX = ReducedFootX,
                    SizeY = 1,
                    SizeZ = ReducedFootZ,
                    Source = bp.Source,
                }
            end
            bp.SpawnDummyId = DummyID
        else
            bp.SpawnDummyId = id -- Aircraft can be themselves.
        end
    end
    for id, bp in NewDummies do
        all_bps[id] = bp
    end
end


---@param all_bps BlueprintsTable
function PostModBlueprints(all_bps)
    -- Brute51: Modified code for ship wrecks and added code for SCU presets.
    -- removed the pairs() function call in the for loops for better efficiency and because it is not necessary.
    local preset_bps = {}

    SpawnMenuDummyChanges(all_bps.Unit)
    
    for _, bp in all_bps.Unit do
        -- skip units without categories
        if bp.Categories then
            -- check if blueprint was changed in ModBlueprints(all_bps)
            if bp.Mod or table.getsize(bp.CategoriesHash) ~= table.getsize(bp.Categories) then
            bp.CategoriesHash = table.hash(bp.Categories)
            end

            if bp.CategoriesHash.USEBUILDPRESETS then
                -- HUSSAR adding logic for finding issues in enhancements table
                local issues = {}
                if not bp.Enhancements then table.insert(issues, 'no Enhancements value') end
                if type(bp.Enhancements) ~= 'table' then table.insert(issues, 'no Enhancements table') end
                if not bp.EnhancementPresets then table.insert(issues, 'no EnhancementPresets value') end
                if type(bp.EnhancementPresets) ~= 'table' then table.insert(issues, 'no EnhancementPresets table') end
                -- check blueprint, if correct info for presets then put this unit on the list to handle later
                if table.empty(issues) then
                    table.insert(preset_bps, table.deepcopy(bp))
                else
                    issues = table.concat(issues, ', ')
                    WARN('UnitBlueprint ' .. repr(bp.BlueprintId) .. ' has a category USEBUILDPRESETS but ' .. issues)
                end
            end
        end

        BlueprintLoaderUpdateProgress()
    end

    HandleUnitWithBuildPresets(preset_bps, all_bps)

    -- find custom strategic icons defined by ui mods, this should be the very last thing 
    -- we do before releasing the blueprint values to the game as we want to catch all
    -- units, even those included by mods
    FindCustomStrategicIcons(all_bps)
    BlueprintLoaderUpdateProgress()

    -- dynamically compute the unit threat values that are used by the AI to make sense
    -- of a units capabilities
    SetThreatValuesOfUnits(all_bps.Unit)
    BlueprintLoaderUpdateProgress()

    ProcessWeapons(all_bps, all_bps.Unit)
    BlueprintLoaderUpdateProgress()

    -- re-computes all the LODs of various entities to match the LOD with the size of the entity
    CalculateLODs(all_bps)
    BlueprintLoaderUpdateProgress()

    -- post process units and projectiles for easier access to information and sanitizing some fields
    PostProcessProjectiles(all_bps.Projectile)
    PostProcessUnits(all_bps, all_bps.Unit)
    PostProcessProps(all_bps.Prop)
end

--- Loads all blueprints with optional parameters  
--- NOTE now it supports loading blueprints on UI-side in addition to loading on Sim-side  
--- `Sim -> LoadBlueprints() - no arguments, no changes!`  
--- `UI  -> LoadBlueprints('*_unit.bp', {'/units'}, mods, true, true, true, taskNotifier)`  used in ModsManager.lua  
--- `UI  -> LoadBlueprints('*_unit.bp', {'/units'}, mods, false, true, true, taskNotifier)` used in UnitsAnalyzer.lua
---@param pattern? string            pattern of files to load, defaults to `'*.bp'`
---@param directories? string[]      paths to load blueprints from, defaults to all directories
---@param mods? ModInfo[]            mods to load blueprints from, defaults to active mods
---@param skipGameFiles? boolean     skip loading original game files
---@param skipExtraction? boolean    skip extraction of meshes
---@param skipRegistration? boolean  skip registration of blueprints
---@param taskNotifier? TaskNotifier notifier that is updating UI when loading blueprints
function LoadBlueprints(pattern, directories, mods, skipGameFiles, skipExtraction, skipRegistration, taskNotifier)
    local task = 'Blueprints Loading... '
    local progress = nil
    local total = nil
    local files = {}

    -- set default parameters if they are not provided
    if not pattern then pattern = '*.bp' end
    if not directories then
        directories = {'/effects', '/env', '/meshes', '/projectiles', '/props', '/units'}
    end

    LOG('Blueprints Loading... \'' .. tostring(pattern) .. '\' files')

    if not mods then
        mods = __active_mods or import("/lua/mods.lua").GetGameMods()
    end
    InitOriginalBlueprints()

    if not skipGameFiles then
        for _, dir in directories do
            task = 'Blueprints Loading: original files from ' .. dir .. ' directory'
            files = DiskFindFiles(dir, pattern)
            total = table.getsize(files)
            LOG(task)

            for k, file in files do
                BlueprintLoaderUpdateProgress()
                -- update UnitManager UI via taskNotifier only if it exists
                if taskNotifier then
                   taskNotifier:Update(task, total, k)
                end
                safecall(task .. ': ' .. file, doscript, file)
            end
        end
    end

    local stats = {}
    stats.UnitsOrg = table.getsize(original_blueprints.Unit)
    stats.ProjsOrg = table.getsize(original_blueprints.Projectile)

    -- try and load in pre game data for current map directory
    local preGameData = LoadPreGameData()
    if preGameData and preGameData.CurrentMapDir then
        task = 'Blueprints Loading: Blueprints from current map'
        files = DiskFindFiles(preGameData.CurrentMapDir, pattern)
        for k, file in files do
            BlueprintLoaderUpdateProgress()
            -- update UnitManager UI via taskNotifier only if it exists
            if taskNotifier then
               taskNotifier:Update(task, total, k)
            end

            safecall(task .. ': ' .. file, doscript, file)
        end
    end

    for _, mod in mods or {} do
        current_mod = mod -- used in UnitBlueprint()
        task = 'Blueprints Loading: modded files from "' .. mod.name .. '" mod'
        files = DiskFindFiles(mod.location, pattern)
        total = table.getsize(files)
        LOG(task)

        for k,file in files do
            BlueprintLoaderUpdateProgress()
            -- update UnitManager UI via taskNotifier only if it exists
            if taskNotifier then
               taskNotifier:Update(task, total, k)
            end
            safecall(task .. ': ' .. file, doscript, file)
        end
    end
    stats.UnitsMod = table.getsize(original_blueprints.Unit) - stats.UnitsOrg
    stats.ProjsMod = table.getsize(original_blueprints.Projectile) - stats.ProjsOrg

    if not skipExtraction then
        BlueprintLoaderUpdateProgress()
        LOG('Blueprints Extracting mesh...')
        ExtractAllMeshBlueprints()
    end

    BlueprintLoaderUpdateProgress()
    LOG('Blueprints Modding...')
    PreModBlueprints(original_blueprints)
    ModBlueprints(original_blueprints)
    PostModBlueprints(original_blueprints)

    stats.UnitsTotal = table.getsize(original_blueprints.Unit)
    stats.UnitsPreset = stats.UnitsTotal - stats.UnitsOrg - stats.UnitsMod
    if stats.UnitsTotal > 0 then
        LOG('Blueprints Loading... completed: ' .. stats.UnitsOrg .. ' original, '
                                                .. stats.UnitsMod .. ' modded, and '
                                                .. stats.UnitsPreset .. ' preset units')
    end
    stats.ProjsTotal = table.getsize(original_blueprints.Projectile)
    if stats.ProjsTotal > 0 then
        LOG('Blueprints Loading... completed: ' .. stats.ProjsOrg .. ' original and '
                                                .. stats.ProjsMod .. ' modded projectiles')
    end

    if not skipRegistration then
        BlueprintLoaderUpdateProgress()
        LOG('Blueprints Registering...')
        RegisterAllBlueprints(original_blueprints)
        original_blueprints = nil
    else
        return original_blueprints
    end
end

--- Reloads a single blueprint
---@param file FileName
function ReloadBlueprint(file)
    InitOriginalBlueprints()

    safecall("Blueprints Reloading... " .. file, doscript, file)

    ExtractAllMeshBlueprints()
    PreModBlueprints(original_blueprints)
    ModBlueprints(original_blueprints)
    PostModBlueprints(original_blueprints)
    RegisterAllBlueprints(original_blueprints)
    original_blueprints = nil
end