KISS FC Firmware 1.3-RC46z

Updates and Features

• add support for TBS Crossfire v3
• add support for IRC Ghost (thanks Alex)
• add support for Frsky Fport2
• bugfix for Fport failsafe (low aux)
• bugfixes and other improvements

KISS FC Firmware 1.3-RC46i

Updates and Features

• fixed gyro initialisation on FETtec Mini AIO 15A
• improved level mode
• PID bugfix on D-term
• support for non-standard DShot commands
• bugfixes and other improvements

FETtec Alpha FC firmware 0.7.63

Adjustments:

• Blackbox throttle value fix
• Menu refactoring
• Live data within menu
• Post flight stats (Menu entry)
• Math code refactoring
• Improved Target support
• Improved GPS detection
• Serial passthrough for updates (Normal + fixed setting & VCP (will take settings from PC application))
• Some added OSD Items (Throttle + CPU)
• Full configurable FC orientation (save custom and and then you can set -180/+180 on each axis)
• OSD align support via GUI directly (single click)

FETtec Alpha FC firmware 0.7.42

Adjustments:

• Added RC input smoothing (disabled, 50hz, 25hz, 10hz)
• Added blackbox data to support PID toolbox (>= 0.60)
• Added support for up to 16 motors
• Fixed level mode when FC is rotated
• Target support (added T-Motor FC)
• rework some OSD menu code

Please check your configuration backup & review after upgrading
When flashing to T-Motor FC please review board orientation (this has been changed to reflect the default board layout)

FETtec Alpha FC firmware 0.7.26

Adjustments:

• MSP code rewrite
• DJI O3 air unit support
• MSP HD DisplayPort (50x18 HDZero / 53x20 Walksnail / 60x22 WTFOS)
• Motortest on BLHeli passthrough
• Frsky Fport, Fport2.0 & FBUS support (limited telemetry)
• New Mixer (Hexa, Flat Octo, Octo X8)
• OSD/GUI (show motor direction)
• various OSD fixes
• Blackbox support for new craft types

FETtec Alpha FC firmware 0.7.1

This is the initial release of the FETtec Alpha FC firmware which brings the following support

• Supported Hardware: FETtec AIO 35A (-N), FETtec FC F7, FETtec FC G4 (-N)
• ESC outputs: PWM, Oneshot, Dhot300-2400, FETtec Onewire, FETtec S2M
• Receiver support: SBUS, FastSBUS, CRSF, CRSFv3, Ghost
• Full FETtec ESC passthrough for updates
• BLHeli passthrough
• Orientation presets for FETtec and BLHeli ESCs
• Configuration backup and recovery
• Motor beeper functionality
• Throttle scaling
• Real pit mode
• Level mode
• GPS (speed and position)(works with all GPS modules that can use the ublox protocol M8 or higher)
• HD OSD support (DJI/Caddx/Runcam, MSP for HD zero, MSP for Walksnail)

For configuration and flashing please use https://gui.fettec.net/

FETtec Alpha OSD firmware 0.1.18

Adjustments

• Add missing icons/character required in FETtec Alpha FC firmware 0.7.26

FETtec Alpha OSD firmware 0.1.17

This is the initial FETtec Alpha OSD (G0 OSD) firmware using MSP displayport (canvas) protocol

This firmware is not compatible with KISS firmware. Please use 0.1.5 when using KISS firmware

OSD Firmware 0.1.5

Firmware improvements

• Settings will remain after firmware update
• Stick threshold (low / medium / high) instead of values
• Remember the last selected graph after re-arm
• Adjusted OSD resolution for stability
• Improved camera autodetect and added sync on start (PAL/NTSC detection)
• Adjust position on resolution changes
• Some visual bugfixes and adjustments

ESC Firmware 1.0.155

Changes

• Added trapezoidal commutation (increase RPM up to 6% with reduced efficiency and smoothness) [require GUI update]
• Implemented center alined PWM to reduce switching loss
• Improved demagnetization detection
• Optimizations and improvements