apio time [OPTIONS]
Bitstream timing analysis: generates a rpt file with a topological timing analysis report, from a verilog and a pcf files.
Required packages: scons
, icestorm
.
apio time
-b, --board
Select a specific board.
--fpga
Select a specific FPGA.
--size --type --pack
Select a specific FPGA size, type and pack.
-p, --project-dir
Set the target directory for the project.
-v, --verbose
Show the entire output of the command.
--verbose-yosys
Show the yosys output of the command.
--verbose-arachne
Show the arachne output of the command.
Note
All available boards, FPGAs, sizes, types and packs are showed in cmd_boards
- Timing analysis for the leds example
$ apio time
[] Processing icezum
---------------------------------------------------------------------------------------------
[...]
// Reading input .asc file..
// Reading 1k chipdb file..
// Creating timing netlist..
// Timing estimate: 0.24 ns (4161.98 MHz)
================================== [SUCCESS] Took 1.10 seconds ==============================
$ cat hardware.rpt
icetime topological timing analysis report
==========================================
Warning: This timing analysis report is an estimate!
Info: max_span_hack is enabled: estimate is conservative.
Report for critical path:
-------------------------
pre_io_13_11_0 (PRE_IO) [clk] -> PADOUT: 0.240 ns
0.240 ns io_pad_13_11_0_din
Total number of logic levels: 0
Total path delay: 0.24 ns (4161.98 MHz)