We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi Guys,
We have a customized i.MX6Q Board based on sabrelite reference board.
We have the following configuration:
Linux : 3.10.53
Gstreamer 1.0 latest i.MX6 Plugins
We connected OV5642 Camera over CSI Interface..Used the following command to display the camera output on the screen.
gst-launch-1.0 imxv4l2videosrc device=/dev/video0 imx-capture-mode=4 fps-n=15 ! imxipuvideosink
It works, but initially, it takes time to settle for few seconds, there is genlock issue
But when I modify the fps to 30, I get distorted output.. What do you think is wrong here.. Any help is appreciated...
The text was updated successfully, but these errors were encountered:
Could you, please, test using the latest version and update the status @md-jamal ?
Sorry, something went wrong.
No branches or pull requests
Hi Guys,
We have a customized i.MX6Q Board based on sabrelite reference board.
We have the following configuration:
Linux : 3.10.53
Gstreamer 1.0 latest i.MX6 Plugins
We connected OV5642 Camera over CSI Interface..Used the following command to display the camera output on the screen.
gst-launch-1.0 imxv4l2videosrc device=/dev/video0 imx-capture-mode=4 fps-n=15 ! imxipuvideosink
It works, but initially, it takes time to settle for few seconds, there is genlock issue
But when I modify the fps to 30, I get distorted output.. What do you think is wrong here.. Any help is appreciated...
The text was updated successfully, but these errors were encountered: