-
Notifications
You must be signed in to change notification settings - Fork 0
/
flipchip_tester_ESP32_v00.ino
3763 lines (3414 loc) · 136 KB
/
flipchip_tester_ESP32_v00.ino
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
// tester_gw.cpp : This file contains the 'main' function. Program execution begins and ends there.
//
//#include <iostream>
/************************************************************************/
/* */
/* tester.c PDP-8 card tester via SPI */
/* */
/* */
/* compile with Microsoft C 1.52 with command line: */
/* cl /W4 /AL tester.c */
/* */
/************************************************************************/
#include "FS.h"
#include "SD.h"
#include "SPI.h"
//#define VERSION_STRING "version 0.91 November 27, 2015"
#define VERSION_STRING "version 0.91a August 4, 2021"
//#define _CRT_SECURE_NO_WARNINGS 1 /* disable Microsoft 'old library' warnings */
// define MCP chip addresses
#define IC1 1
#define IC2 2
#define IC3 3
#define IC4 4
#define IC5 5
#define IODIR_AB 0
#define GPPUA_AB 0x0c
#define GPIO_AB 0x12
const int onboard_ledPin = 2;
const int SDchipSelectPin = 4;
const int MCPchipSelectIC1 = 21;
const int MCPchipSelectIC2 = 17;
const int MCPchipSelectIC3 = 16;
const int MCPchipSelectIC4 = 15;
const int MCPchipSelectIC5 = 22;
const int MCPnresetPin = 5;
//#define SERIAL_TIMEOUT 600000
#define LOG_FILENAME "tester.log"
char print_buffer[1024];
//char print_buffer[512];
File file_test;
// modification to the original print function
// outputs a char array called "buffer" to the console and to the Log File
//
void print(const char* pbuffer)
{
Serial.print(String(pbuffer));
//appendFile(SD, LOG_FILENAME, buffer);
}
// function to print a char buffer
//void print(const char* buffer)
//{
// printST(string(buffer));
//}
String millis2time() {
String Time = "";
unsigned long ss;
byte mm, hh, dd;
ss = millis() / 1000;
dd = ss / 86400;
hh = (ss - dd * 86400) / 3600;
mm = (ss - dd * 86400 - hh * 3600) / 60;
ss = (ss - dd * 86400 - hh * 3600) - mm * 60;
Time += (String)dd + ":";
if (hh < 10)Time += "0";
Time += (String)hh + ":";
if (mm < 10)Time += "0";
Time += (String)mm + ":";
if (ss < 10)Time += "0";
Time += (String)ss;
return Time;
}
void str_to_upr(char * cbuffer)
{
while(*cbuffer != '\0'){
if((*cbuffer >= 'a') && (*cbuffer <= 'z')) *cbuffer = *cbuffer & 0xdf;
cbuffer++;
}
}
void sd_fgets(char * sdfgbuffer, int sd_buffer_size/*, file_test*/)
{
int sdcharcount = 1;
char *sdbufferpointer;
//Serial.println("sd_fgets called");
sdbufferpointer = sdfgbuffer;
while(file_test.available()){
*sdbufferpointer = file_test.read();
if(*sdbufferpointer == '\n') break;
//if(*sdbufferpointer == '\r') break;
if(*sdbufferpointer == '\0') break;
if(++sdcharcount >= sd_buffer_size) break;
if(*sdbufferpointer != '\r')
++sdbufferpointer;
}
*sdbufferpointer = '\0';
Serial.println("sd_fgets exit [" + String(sdcharcount) + "]: " + String(sdfgbuffer));
}
void print_timestamp(void)
{
#define TIME_BUFFER_LENGTH 26
//uint32_t now_time32; /* MSVC 1.52 is only 32 bit times. BLOWS UP in 2038 */
char time_buffer[TIME_BUFFER_LENGTH];
char* ptr;
//time(&now_time32);
String time_since_boot = millis2time();
//strcpy(time_buffer, ctime(&now_time32)); /* ctime() returns pointer to static 26 character string */
// copy the time_since_boot String to the time_buffer char array
time_since_boot.toCharArray(time_buffer, TIME_BUFFER_LENGTH);
ptr = strchr(time_buffer, '\n'); // these two lines are from the original code, probably no longer needed
if (ptr != (char*)NULL) *ptr = '\0';
print(time_buffer);
}
// Function to write to the MCP23S17
// parameters are chip address, register address, register data
//
void mcpwrite(uint16_t chipaddr, uint16_t regaddr, uint16_t regdata) {
//MCP23S17 write to IC chipaddr, register pair regaddr, with regdata
switch(chipaddr){ // assert the chip select signal of the specified MCP chip
case IC1:
digitalWrite(MCPchipSelectIC1, LOW);
break;
case IC2:
digitalWrite(MCPchipSelectIC2, LOW);
break;
case IC3:
digitalWrite(MCPchipSelectIC3, LOW);
break;
case IC4:
digitalWrite(MCPchipSelectIC4, LOW);
break;
case IC5:
digitalWrite(MCPchipSelectIC5, LOW);
break;
default:
print("broken sofware, invalid MCP chip address");
}
SPI.transfer16(0x4000 | (chipaddr << 9) | regaddr); //Device Opcode, Chip Address, Write, Reg Addr
//SPI.transfer16(0x4000 | regaddr); //Device Opcode, Write, Reg Addr
SPI.transfer16(regdata); // Register Data
digitalWrite(MCPchipSelectIC1, HIGH);
digitalWrite(MCPchipSelectIC2, HIGH);
digitalWrite(MCPchipSelectIC3, HIGH);
digitalWrite(MCPchipSelectIC4, HIGH);
digitalWrite(MCPchipSelectIC5, HIGH);
}
// Function to read from the MCP23S17
// parameters are chip address, register address
// returns 16-bit value read from the specified chip and register
//
uint16_t mcpread(uint16_t chipaddr, uint16_t regaddr) {
//MCP23S17 read from IC chipaddr, register pair regaddr, with regdata
uint16_t mcp_read_data;
switch(chipaddr){ // assert the chip select signal of the specified MCP chip
case IC1:
digitalWrite(MCPchipSelectIC1, LOW);
break;
case IC2:
digitalWrite(MCPchipSelectIC2, LOW);
break;
case IC3:
digitalWrite(MCPchipSelectIC3, LOW);
break;
case IC4:
digitalWrite(MCPchipSelectIC4, LOW);
break;
case IC5:
digitalWrite(MCPchipSelectIC5, LOW);
break;
default:
print("broken sofware, invalid MCP chip address");
}
SPI.transfer16(0x4100 | (chipaddr << 9) | regaddr); //Device Opcode, Chip Address, Read, Reg Addr
//SPI.transfer16(0x4100 | regaddr); //Device Opcode, Read, Reg Addr
mcp_read_data = SPI.transfer16(0x0000); //sending dummy data to read the port
digitalWrite(MCPchipSelectIC1, HIGH);
digitalWrite(MCPchipSelectIC2, HIGH);
digitalWrite(MCPchipSelectIC3, HIGH);
digitalWrite(MCPchipSelectIC4, HIGH);
digitalWrite(MCPchipSelectIC5, HIGH);
return(mcp_read_data);
}
unsigned short lpt_base = 0x378; /* LPT1 on Dell D610 */
unsigned char lpt_value_last_data_out;
unsigned char lpt_value_last_control_out;
unsigned char lpt_value_new_data;
unsigned char lpt_value_new_control;
unsigned char lpt_value_status_last_read;
unsigned char lpt_value_data_last_read;
unsigned char lpt_value_control_last_read;
void lpt_input_data(void)
{
//lpt_value_data_last_read = (unsigned char)_inp(lpt_base + 0);
}
void lpt_input_status(void)
{
//lpt_value_status_last_read = (unsigned char)_inp(lpt_base + 1);
}
void lpt_input_control(void)
{
//lpt_value_control_last_read = (unsigned char)_inp(lpt_base + 2);
}
void lpt_output_data(void)
{
lpt_value_last_data_out = lpt_value_new_data;
//_outp(lpt_base + 0, lpt_value_last_data_out);
}
void lpt_output_control(void)
{
lpt_value_last_control_out = lpt_value_new_control;
//_outp(lpt_base + 2, lpt_value_last_control_out);
}
void lpt_init(void)
{
lpt_input_data();
lpt_input_control();
lpt_input_status();
lpt_value_new_data = lpt_value_data_last_read;
lpt_value_new_control = lpt_value_control_last_read;
lpt_output_data();
lpt_output_control();
}
/* routines that stage next output or use last input */
void lpt_set_data_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_data |= (1 << bit_number);
}
void lpt_clr_data_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_data &= ~(1 << bit_number);
}
void lpt_set_control_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_control |= (1 << bit_number);
}
void lpt_clr_control_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_control &= ~(1 << bit_number);
}
void lpt_toggle_data_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_data ^= (1 << bit_number);
}
void lpt_toggle_control_bit(unsigned int bit_number)
{
if (bit_number > 7)
{
print("ERROR: broken software\r\n");
exit(1);
}
lpt_value_new_control ^= (1 << bit_number);
}
//#define SPI_SPARE_PIN_1_LO (lpt_set_control_bit( 0 )) /* pin 1 C0- -Strobe */
//#define SPI_SPARE_PIN_1_HI (lpt_clr_control_bit( 0 )) /* pin 1 C0- -Strobe */
//#define SPI_RESET_N_PIN_2_LO (lpt_clr_data_bit( 0 )) /* pin 2 D0+ +Data0 */
//#define SPI_RESET_N_PIN_2_HI (lpt_set_data_bit( 0 )) /* pin 2 D0+ +Data0 */
//#define SPI_CS_N_PIN_3_LO (lpt_clr_data_bit( 1 )) /* pin 3 D1+ +Data1 */
//#define SPI_CS_N_PIN_3_HI (lpt_set_data_bit( 1 )) /* pin 3 D1+ +Data1 */
//#define SPI_CLK_PIN_4_LO (lpt_clr_data_bit( 2 )) /* pin 4 D2+ +Data2 */
//#define SPI_CLK_PIN_4_HI (lpt_set_data_bit( 2 )) /* pin 4 D2+ +Data2 */
//#define SPI_SO_A_PIN_5_LO (lpt_clr_data_bit( 3 )) /* pin 5 D3+ +Data3 */
//#define SPI_SO_A_PIN_5_HI (lpt_set_data_bit( 3 )) /* pin 5 D3+ +Data3 */
//#define SPI_SO_B_PIN_6_LO (lpt_clr_data_bit( 4 )) /* pin 6 D4+ +Data4 */
//#define SPI_SO_B_PIN_6_HI (lpt_set_data_bit( 4 )) /* pin 6 D4+ +Data4 */
//#define SPI_SO_C_PIN_7_LO (lpt_clr_data_bit( 5 )) /* pin 7 D5+ +Data5 */
//#define SPI_SO_C_PIN_7_HI (lpt_set_data_bit( 5 )) /* pin 7 D5+ +Data5 */
//#define SPI_SO_D_PIN_8_LO (lpt_clr_data_bit( 6 )) /* pin 8 D6+ +Data6 */
//#define SPI_SO_D_PIN_8_HI (lpt_set_data_bit( 6 )) /* pin 8 D6+ +Data6 */
//#define SPI_SO_E_PIN_9_LO (lpt_clr_data_bit( 7 )) /* pin 9 D7+ +Data7 */
//#define SPI_SO_E_PIN_9_HI (lpt_set_data_bit( 7 )) /* pin 9 D7+ +Data7 */
//#define SPI_SI_D_PIN_10_IN ((lpt_value_status_last_read & (1 << 6)) ? 1 : 0) /* pin 10 S6+ -Ack */
//#define SPI_SI_E_PIN_11_IN ((lpt_value_status_last_read & (1 << 7)) ? 0 : 1) /* pin 11 S7- +Busy */
//#define SPI_SI_C_PIN_12_IN ((lpt_value_status_last_read & (1 << 5)) ? 1 : 0) /* pin 12 S5+ +PaperEnd */
//#define SPI_SI_B_PIN_13_IN ((lpt_value_status_last_read & (1 << 4)) ? 1 : 0) /* pin 13 S4+ +SelectIn */
//#define SPI_SPARE_PIN_14_LO (lpt_set_control_bit( 1 )) /* pin 14 C1- -AutoFd */
//#define SPI_SPARE_PIN_14_HI (lpt_clr_control_bit( 1 )) /* pin 14 C1- -AutoFd */
//#define SPI_SI_A_PIN_15_IN ((lpt_value_status_last_read & (1 << 3)) ? 1 : 0) /* pin 15 S3+ -Error */
//#define SPI_SPARE_PIN_16_LO (lpt_clr_control_bit( 2 )) /* pin 16 C2+ -Init */
//#define SPI_SPARE_PIN_16_HI (lpt_set_control_bit( 2 )) /* pin 16 C2+ -Init */
//#define SPI_SPARE_PIN_17_LO (lpt_set_control_bit( 3 )) /* pin 17 C3- -Select */
//#define SPI_SPARE_PIN_17_HI (lpt_clr_control_bit( 3 )) /* pin 17 C3- -Select */
/* pins 18 thru 25 are ground */
//void spi_output(void)
//{
// lpt_output_data();
//}
//void spi_input(void)
//{
// lpt_input_status();
//}
//void spi_init(void)
//{
// lpt_init();
//
// SPI_SPARE_PIN_1_LO; /* spare lo */
// SPI_RESET_N_PIN_2_HI; /* reset-n hi */
// SPI_CS_N_PIN_3_HI; /* remove chip select */
// SPI_CLK_PIN_4_HI; /* clock hi */
// SPI_SO_A_PIN_5_LO; /* data out lo */
// SPI_SO_B_PIN_6_LO; /* data out lo */
// SPI_SO_C_PIN_7_LO; /* data out lo */
// SPI_SO_D_PIN_8_LO; /* data out lo */
// SPI_SO_E_PIN_9_LO; /* data out lo */
// SPI_SI_D_PIN_10_IN; /* input */
// SPI_SI_E_PIN_11_IN; /* input */
// SPI_SI_C_PIN_12_IN; /* input */
// SPI_SI_B_PIN_13_IN; /* input */
// SPI_SPARE_PIN_14_LO; /* spare lo */
// SPI_SI_A_PIN_15_IN; /* input */
// SPI_SPARE_PIN_16_LO; /* spare lo */
// SPI_SPARE_PIN_17_LO; /* spare lo */
// spi_output();
//}
//void spi_open(void)
//{
// SPI_CS_N_PIN_3_LO; /* apply chip select */
// spi_output();
//}
//void spi_close(void)
//{
// SPI_CS_N_PIN_3_HI; /* remove chip select */
// spi_output();
//}
//void spi_txrx(unsigned char* out_ptr, unsigned char* in_ptr)
//{
// int i;
// unsigned char mask;
//
// for (i = 0; i < 5; i++) in_ptr[i] = 0; /* zero input array */
// mask = 0x80; /* MSB first */
// do
// {
// if (out_ptr[0] & mask) SPI_SO_A_PIN_5_HI; else SPI_SO_A_PIN_5_LO;
// if (out_ptr[1] & mask) SPI_SO_B_PIN_6_HI; else SPI_SO_B_PIN_6_LO;
// if (out_ptr[2] & mask) SPI_SO_C_PIN_7_HI; else SPI_SO_C_PIN_7_LO;
// if (out_ptr[3] & mask) SPI_SO_D_PIN_8_HI; else SPI_SO_D_PIN_8_LO;
// if (out_ptr[4] & mask) SPI_SO_E_PIN_9_HI; else SPI_SO_E_PIN_9_LO;
// SPI_CLK_PIN_4_LO;
// spi_output();
//
// SPI_CLK_PIN_4_HI; /* rising edge */
// spi_output();
// spi_input();
//
// if (SPI_SI_A_PIN_15_IN == 0) in_ptr[0] |= mask;
// if (SPI_SI_B_PIN_13_IN == 0) in_ptr[1] |= mask;
// if (SPI_SI_C_PIN_12_IN == 0) in_ptr[2] |= mask;
// if (SPI_SI_D_PIN_10_IN == 0) in_ptr[3] |= mask;
// if (SPI_SI_E_PIN_11_IN == 0) in_ptr[4] |= mask;
//
// mask >>= 1;
// } while (mask);
//}
// MCP23S17 Register Address definitions for IOCON.BANK = 0
// The A & B registers are in the same bank, not separated into different banks
// This is best for the tester so that A & B can be written and read using a single 16-bit SPI transfer
// These are the original register definitions, not changed for Arduino, just added the header comments.
//
#define REG_IODIR 0x00 /* I/O direction (1=in) */
#define REG_IOPOL 0x02 /* I/O polarity */
#define REG_GPINTEN 0x04 /* interrupt enables */
#define REG_DEFVAL 0x06 /* default values */
#define REG_INTCON 0x08 /* interrupt config */
#define REG_IOCON 0x0A /* I/O config */
#define REG_GPPU 0x0C /* pullup enables */
#define REG_INTF 0x0E /* interrupt flag */
#define REG_INTCAP 0x10 /* interrupt capture */
#define REG_GPIO 0x12 /* input/output */
#define REG_OLAT 0x14 /* output latches */
// Print the name of the MCP23S17 register specified by the "reg" parameter
// the register LSB is removed in this function so the name is not specific to A or B
//
void print_reg_name(unsigned char reg)
{
switch (reg & 0xFE)
{
case REG_IODIR: print("IODIR "); break;
case REG_IOPOL: print("IOPOL "); break;
case REG_GPINTEN: print("GPINTEN"); break;
case REG_DEFVAL: print("DEFVAL "); break;
case REG_INTCON: print("INTCON "); break;
case REG_IOCON: print("IOCON "); break;
case REG_GPPU: print("GPPU "); break;
case REG_INTF: print("INTF "); break;
case REG_INTCAP: print("INTCAP "); break;
case REG_GPIO: print("GPIO "); break;
case REG_OLAT: print("OLAT "); break;
default: print("???????"); break;
}
}
// reg_init() is from the original code.
// It asserts reset for 100 msec and de-asserts reset for an additional 100 msec.
// The MCP23S17 resets when RESET/ is asserted for > 1 usec so use the Arduino delay
// function to delay 2 msec to guarantee the delay is at least 1 msec, far more than 1 usec
//
void reg_init(void) /* initialize GPIO chip registers */
{
digitalWrite(MCPchipSelectIC1, LOW); // drive all five chip selects inactive, not sure if it's necessary
digitalWrite(MCPchipSelectIC2, LOW);
digitalWrite(MCPchipSelectIC3, LOW);
digitalWrite(MCPchipSelectIC4, LOW);
digitalWrite(MCPchipSelectIC5, LOW);
digitalWrite(MCPnresetPin, LOW); // set MCP not-reset to the active (LOW) state
delay(2); //delay 2 msec to hold not-reset LOW
digitalWrite(MCPnresetPin, HIGH); // restore MCP not-reset to the inactive (HIGH) state
digitalWrite(MCPchipSelectIC1, HIGH); //drive all five MCP chip selects inactive
digitalWrite(MCPchipSelectIC2, HIGH);
digitalWrite(MCPchipSelectIC3, HIGH);
digitalWrite(MCPchipSelectIC4, HIGH);
digitalWrite(MCPchipSelectIC5, HIGH);
delay(2); //delay 2 msec to hold not-reset HIGH after reset
MCPinitializeIOCON(); // initializes BANK and HAEN
// unsigned long i;
//
// spi_init(); /* initialize SPI signals */
//
//#define RESET_LOOPS 20000UL /* 20,000 is about 100ms on D610,WinXp,allowio */
// for (i = 0; i < RESET_LOOPS; i++)
// {
// SPI_RESET_N_PIN_2_LO; /* reset active */
// spi_output();
// spi_input();
// }
// for (i = 0; i < RESET_LOOPS; i++)
// {
// SPI_RESET_N_PIN_2_HI; /* reset inactive */
// spi_output();
// spi_input();
// }
}
// function to read from the registers in all 5 MCP23S17 chips
// "reg" specifies the register address, "value" is an array to return the 5 data values
// that were read... one value for each chip. value[0] is from IC1 and value[4] is from IC5.
// The addresses of the MCP chips are numbered 1 through 5, corresponding to the IC numbers.
// This function has been converted to use the Arduino SPI hardware and accesses
// each MCP chip individually.
//
void reg_read(unsigned char reg, unsigned int* value)
{
// "old" code for the PC parallel port is commented out
//unsigned int i;
unsigned int chipaddress;
unsigned int tempreadvalue; // because tester code expects A reg in the low byte and B reg in the high byte
//unsigned char rx_array[5];
//unsigned char tx_array[5];
//spi_open();
//for (i = 0; i < 5; i++) tx_array[i] = 0x4F; /* b0 = 1 read */
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) tx_array[i] = reg;
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) tx_array[i] = 0x5A;
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) value[i] = (unsigned int)rx_array[i];
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) value[i] |= (unsigned int)rx_array[i] << 8;
//spi_close();
for(chipaddress = IC1; chipaddress <= IC5; chipaddress++){
// Exchange the high and low byte of the data value because tester code expects
// the A reg in the low byte of the mapping and the B reg in the high byte of the mapping.
// However, SPI serializes the high byte first to the A register, then the low byte to the B register.
tempreadvalue = mcpread(chipaddress, reg);
value[chipaddress - 1] = ((tempreadvalue << 8) & 0xff00) | ((tempreadvalue >> 8) & 0xff);
}
}
// function to write to the registers in all 5 MCP23S17 chips
// "reg" specifies the register address, "value" is an array of 5 data values
// to be written... one for each chip. value[0] to IC1 and value[4] to IC5.
// The addresses of the MCP chips are numbered 1 through 5, corresponding to the IC numbers.
// This function has been converted to use the Arduino SPI hardware and accesses
// each MCP chip individually.
//
void reg_write(unsigned char reg, unsigned int* value)
{
// "old" code for the PC parallel port is commented out
//unsigned int i;
unsigned int chipaddress;
unsigned int flippedvalue; // because tester code expects A reg in the low byte and B reg in the high byte
//unsigned char rx_array[5];
//unsigned char tx_array[5];
//spi_open();
//for (i = 0; i < 5; i++) tx_array[i] = 0x4E; /* b0 = 0 write */
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) tx_array[i] = reg;
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) tx_array[i] = (unsigned char)(value[i]);
//spi_txrx(tx_array, rx_array);
//for (i = 0; i < 5; i++) tx_array[i] = (unsigned char)(value[i] >> 8);
//spi_txrx(tx_array, rx_array);
//spi_close();
for(chipaddress = IC1; chipaddress <= IC5; chipaddress++){
// Exchange the high and low byte of the data value because the tester code expects
// the A reg in the low byte of the mapping and the B reg in the high byte of the mapping.
// However, SPI serializes the high byte first to the A register, then the low byte to the B register.
flippedvalue = ((value[chipaddress - 1] << 8) & 0xff00) | ((value[chipaddress - 1] >> 8) & 0xff);
mcpwrite(chipaddress, reg, flippedvalue);
}
}
unsigned int reg_init_and_verify(void) /* returns 0 if okay */
{
unsigned int result;
unsigned int i;
unsigned int data_in[5];
unsigned int uTemp;
reg_init();
for (i = 0; i < 5; i++) data_in[i] = 0;
reg_read(REG_IODIR, data_in);
Serial.println(String("IODIR ")+String(data_in[0],HEX)+String(" ")+String(data_in[1],HEX)+String(" ")+String(data_in[2],HEX)+String(" ")+String(data_in[3],HEX)+String(" ")+String(data_in[4],HEX));
uTemp = 0xFFFF;
for (i = 0; i < 5; i++) uTemp &= data_in[i]; /* s/b FFFFs */
Serial.println(String("uTemp after IODIR read test: ")+String(uTemp,HEX));
reg_read(REG_OLAT, data_in);
Serial.println(String("OLAT ")+String(data_in[0],HEX)+String(" ")+String(data_in[1],HEX)+String(" ")+String(data_in[2],HEX)+String(" ")+String(data_in[3],HEX)+String(" ")+String(data_in[4],HEX));
uTemp = (~uTemp); /* s/b 0000 */
for (i = 0; i < 5; i++) uTemp |= data_in[i]; /* s/b 0000s */
Serial.println(String("uTemp after OLAT read test: ")+String(uTemp,HEX));
//if (uTemp == 0x0000)
if ((uTemp & 0xffff) == 0x0000) // must test only the least significant 16 bits
{
result = 0; /* no error */
}
else
{
result = 1; /* error */
print("\r\n");
print("\r\n");
print("***************************************************************************\r\n");
print("* did not verify registers after initialize (chip reset). *\r\n");
print("* check that the tester is cabled to LPT port and that the power is on. *\r\n");
print("***************************************************************************\r\n");
print("\r\n");
print("\r\n");
}
return (result);
}
const char edge_pins[19] = "ABCDEFHJKLMNPRSTUV";
#define PIN_DRIVERS 80
#define TEST_COLUMNS 72
const struct
{
unsigned int offset;
unsigned int mask;
} mapping[PIN_DRIVERS] = /* 80 pin drivers */
{
{ 0, (1U << 15) }, /* AA1 */ /* PIN 0 */
{ 0, (1U << 14) }, /* AB1 */
{ 0, (1U << 13) }, /* AC1 */
{ 0, (1U << 12) }, /* AD1 */
{ 0, (1U << 11) }, /* AE1 */
{ 0, (1U << 10) }, /* AF1 */ /* PIN 5 */
{ 0, (1U << 9) }, /* AH1 */
{ 0, (1U << 8) }, /* AJ1 */
{ 1, (1U << 15) }, /* AK1 */
{ 1, (1U << 14) }, /* AL1 */
{ 1, (1U << 13) }, /* AM1 */ /* PIN 10 */
{ 1, (1U << 12) }, /* AN1 */
{ 1, (1U << 11) }, /* AP1 */
{ 1, (1U << 10) }, /* AR1 */
{ 1, (1U << 9) }, /* AS1 */
{ 1, (1U << 8) }, /* AT1 */ /* PIN 15 is PIN_GROUND_AT1 */
{ 2, (1U << 15) }, /* AU1 */
{ 2, (1U << 14) }, /* AV1 */
{ 0, (1U << 7) }, /* AA2 */ /* PIN 18 is PIN_POWER_AA2 */
{ 0, (1U << 6) }, /* AB2 */
{ 0, (1U << 5) }, /* AC2 */ /* PIN 20 is PIN_GROUND_AC2 */
{ 0, (1U << 4) }, /* AD2 */
{ 0, (1U << 3) }, /* AE2 */
{ 0, (1U << 2) }, /* AF2 */
{ 0, (1U << 1) }, /* AH2 */
{ 0, (1U << 0) }, /* AJ2 */ /* PIN 25 */
{ 1, (1U << 0) }, /* AK2 */
{ 1, (1U << 1) }, /* AL2 */
{ 1, (1U << 2) }, /* AM2 */
{ 1, (1U << 3) }, /* AN2 */
{ 1, (1U << 4) }, /* AP2 */ /* PIN 30 */
{ 1, (1U << 5) }, /* AR2 */
{ 1, (1U << 6) }, /* AS2 */
{ 1, (1U << 7) }, /* AT2 */
{ 2, (1U << 0) }, /* AU2 */
{ 2, (1U << 1) }, /* AV2 */ /* PIN 35 */
{ 2, (1U << 13) }, /* BA1 */ /* PIN 36 */
{ 2, (1U << 12) }, /* BB1 */
{ 2, (1U << 11) }, /* BC1 */
{ 2, (1U << 10) }, /* BD1 */
{ 2, (1U << 9) }, /* BE1 */ /* PIN 40 */
{ 2, (1U << 8) }, /* BF1 */
{ 3, (1U << 15) }, /* BH1 */
{ 3, (1U << 14) }, /* BJ1 */
{ 3, (1U << 13) }, /* BK1 */
{ 3, (1U << 12) }, /* BL1 */ /* PIN 45 */
{ 3, (1U << 11) }, /* BM1 */
{ 3, (1U << 10) }, /* BN1 */
{ 3, (1U << 9) }, /* BP1 */
{ 3, (1U << 8) }, /* BR1 */
{ 4, (1U << 15) }, /* BS1 */ /* PIN 50 */
{ 4, (1U << 14) }, /* BT1 */ /* PIN 51 is PIN_GROUND_BT1 */
{ 4, (1U << 13) }, /* BU1 */
{ 4, (1U << 12) }, /* BV1 */
{ 2, (1U << 2) }, /* BA2 */ /* PIN 54 is PIN_POWER_BA2_NC (no connection) */
{ 2, (1U << 3) }, /* BB2 */ /* PIN 55 */
{ 2, (1U << 4) }, /* BC2 */ /* PIN 56 is PIN_GROUND_BC2 */
{ 2, (1U << 5) }, /* BD2 */
{ 2, (1U << 6) }, /* BE2 */
{ 2, (1U << 7) }, /* BF2 */
{ 3, (1U << 0) }, /* BH2 */ /* PIN 60 */
{ 3, (1U << 1) }, /* BJ2 */
{ 3, (1U << 2) }, /* BK2 */
{ 3, (1U << 3) }, /* BL2 */
{ 3, (1U << 4) }, /* BM2 */
{ 3, (1U << 5) }, /* BN2 */ /* PIN 65 */
{ 3, (1U << 6) }, /* BP2 */
{ 3, (1U << 7) }, /* BR2 */
{ 4, (1U << 0) }, /* BS2 */
{ 4, (1U << 1) }, /* BT2 */
{ 4, (1U << 2) }, /* BU2 */ /* PIN 70 */
{ 4, (1U << 3) }, /* BV2 */
{ 4, (1U << 4) }, /* PROBE_1 */ /* PIN 72 */
{ 4, (1U << 5) }, /* PROBE_2 */
{ 4, (1U << 6) }, /* PROBE_3 */
{ 4, (1U << 7) }, /* PROBE_4 */ /* PIN 75 */
{ 4, (1U << 8) }, /* GREEN LED */
{ 4, (1U << 9) }, /* RED LED */
{ 4, (1U << 10) }, /* YELLOW LED */
{ 4, (1U << 11) }, /* RED2 LED */
};
#define PIN_GROUND_AT1 15
#define PIN_GROUND_AC2 20
#define PIN_GROUND_BT1 51
#define PIN_GROUND_BC2 56
unsigned int ground_pin[] =
{
PIN_GROUND_AT1,
PIN_GROUND_AC2,
PIN_GROUND_BT1,
PIN_GROUND_BC2,
};
#define NUMBER_GROUND_PINS (sizeof(ground_pin) / sizeof(ground_pin[0]))
#define PIN_POWER_AA2 18
unsigned int power_pin[1] =
{
PIN_POWER_AA2,
};
#define NUMBER_POWER_PINS (sizeof(power_pin) / sizeof(power_pin[0]))
#define PIN_POWER_BA2_NC 54 /* no connect, so just make it an output lo */
#define PIN_LED_GREEN 76
#define PIN_LED_RED 77
#define PIN_LED_YELLOW 78
#define PIN_LED_RED2 79
unsigned tester_output_lo[] =
{
PIN_POWER_BA2_NC,
PIN_LED_GREEN,
PIN_LED_RED,
PIN_LED_YELLOW,
PIN_LED_RED2,
};
#define NUMBER_OUTPUT_LO_PINS (sizeof(tester_output_lo) / sizeof(tester_output_lo[0]))
#define PIN_PROBE_1 72
#define PIN_PROBE_2 73
#define PIN_PROBE_3 74
#define PIN_PROBE_4 75
unsigned int tester_input_w_pullup[] =
{
PIN_PROBE_1,
PIN_PROBE_2,
PIN_PROBE_3,
PIN_PROBE_4,
};
#define NUMBER_INPUT_W_PULLUP (sizeof(tester_input_w_pullup) / sizeof(tester_input_w_pullup[0]))
char get_pin_type_char(unsigned int pin)
{
char result;
unsigned int i;
result = ' ';
for (i = 0; i < NUMBER_GROUND_PINS; i++)
{
if (pin == ground_pin[i]) result = 'G';
}
for (i = 0; i < NUMBER_POWER_PINS; i++)
{
if (pin == power_pin[i]) result = 'P';
}
for (i = 0; i < NUMBER_OUTPUT_LO_PINS; i++)
{
if (pin == tester_output_lo[i]) result = 'T';
}
for (i = 0; i < NUMBER_INPUT_W_PULLUP; i++)
{
if (pin == tester_input_w_pullup[i]) result = 'T';
}
return (result);
}
void set_default_directions(unsigned int* data_out)
{
unsigned int i;
unsigned int pin;
for (i = 0; i < 5; i++)
{
data_out[i] = 0xFFFF; /* all inputs */
}
for (i = 0; i < NUMBER_OUTPUT_LO_PINS; i++)
{
pin = tester_output_lo[i];
data_out[mapping[pin].offset] &= (~mapping[pin].mask);
}
}
void set_default_outputs(unsigned int* data_out)
{
unsigned int i;
for (i = 0; i < 5; i++)
{
data_out[i] = 0; /* all outputs lo */
}
}
void set_default_pullups(unsigned int* data_out)
{
unsigned int i;
unsigned int pin;
for (i = 0; i < 5; i++)
{
data_out[i] = 0; /* all pullups off */
}
for (i = 0; i < NUMBER_INPUT_W_PULLUP; i++)
{
pin = tester_input_w_pullup[i];
data_out[mapping[pin].offset] &= mapping[pin].mask;
}
}
unsigned int verify_power(unsigned int* data_in) /* !=0 if okay */
{
unsigned int result;
unsigned int i;
unsigned int pin;
Serial.println(String("verify_power 0x")+String(data_in[0],HEX)+String(" 0x")+String(data_in[1],HEX)+String(" 0x")+String(data_in[2],HEX)+String(" 0x")+String(data_in[3],HEX)+String(" 0x")+String(data_in[4],HEX));
result = 1; /* assume okay */
for (i = 0; i < NUMBER_GROUND_PINS; i++)
{
pin = ground_pin[i];
if ((data_in[mapping[pin].offset] & mapping[pin].mask) != 0) result = 0;
Serial.println(String(" ground pin result: 0x")+String(result,HEX)+String(" index = ")+String(i));
}
Serial.println(String("verify_power ground pin result: ")+String(result,HEX));
for (i = 0; i < NUMBER_POWER_PINS; i++)
{
pin = power_pin[i];
Serial.println(String(" pin: ")+String(pin));
Serial.println(String(" data_in[mapping[pin].offset]: 0x")+String(data_in[mapping[pin].offset],HEX)+String(", mapping[pin].mask: 0x")+String(mapping[pin].mask,HEX));
if ((data_in[mapping[pin].offset] & mapping[pin].mask) == 0) result = 0;
Serial.println(String(" power pin result: ")+String(result,HEX)+String(" index = ")+String(i));
}
Serial.println(String("verify_power power pin result: ")+String(result,HEX));
return (result);
}
void set_default_used(unsigned int* used)
{
unsigned int i;
unsigned int pin;
for (i = 0; i < 5; i++) used[i] = 0x0000;
for (i = 0; i < NUMBER_GROUND_PINS; i++)
{
pin = ground_pin[i];
used[mapping[pin].offset] |= mapping[pin].mask;
}
for (i = 0; i < NUMBER_POWER_PINS; i++)
{
pin = power_pin[i];
used[mapping[pin].offset] |= mapping[pin].mask;
}
for (i = 0; i < NUMBER_OUTPUT_LO_PINS; i++)
{
pin = tester_output_lo[i];
used[mapping[pin].offset] |= mapping[pin].mask;
}
for (i = 0; i < NUMBER_INPUT_W_PULLUP; i++)
{
pin = tester_input_w_pullup[i];
used[mapping[pin].offset] |= mapping[pin].mask;
}
}
void stage_pin(unsigned int pin, unsigned int flag, unsigned int* data_out)
{
if (flag)
{
data_out[mapping[pin].offset] |= mapping[pin].mask;
}
else
{
data_out[mapping[pin].offset] &= (~mapping[pin].mask);
}
}
void verify_mapping(void)
{
int i;
unsigned int temp[5];
unsigned int offset;
unsigned int mask;
for (i = 0; i < 5; i++) temp[i] = 0;
for (i = 0; i < PIN_DRIVERS; i++)
{
offset = mapping[i].offset;
if (offset > 4)
{
sprintf(print_buffer, "broken software: mapping[%u].offset is bad\r\n", i);
print(print_buffer);
exit(1);
}
/* expect one and only one bit in the mask */
mask = mapping[i].mask;
mask = mask & (unsigned)(-(signed)mask); /* keeps lowest bit that is set */
if ((mask == 0) || (mask != mapping[i].mask)) /* no bits or more than one bit? */
{
sprintf(print_buffer, "broken software: mapping[%u].mask is bad\r\n", i);
print(print_buffer);
exit(1);
}
if (temp[offset] & mask) /* mask already used? */
{
sprintf(print_buffer, "broken software: mapping[%u] is bad (already used)\r\n", i);
print(print_buffer);
exit(1);
}
temp[offset] |= mask;
}
print("\r\n");
for (i = 0; i < 5; i++)
{
if (temp[i] != 0xFFFF)
{
print("broken software: mapping[] does not define all 80 bits\r\n");
exit(1);
}
}
print("mapping[] is verified\r\n");
}
void print_bin8(unsigned char data)
{
unsigned char mask;
mask = 0x80;
do
{
sprintf(print_buffer, "%1d", data & mask ? 1 : 0);
print(print_buffer);
mask >>= 1;
} while (mask);
}