- Arduino UNO
- breadboard
- SOP8 clamp + flat cable
- breadboard jumper wires
_____
Chip Select (cs) --|1 8|-- (pwr) Vcc
Serial Clock (sk) --|2 7|--
Data In (di) --|3 6|-- (org) Organization Select
Data Out (do) --|4 5|-- (gnd) Vss/Ground
¯¯¯¯¯
Arduino Connection:
Vcc (pwr) - Pin 9
Vss (gnd) - GND
Chip Select (cs) - Pin 10
Serial Clock (sk) - Pin 7
Data In (di) - Pin 11
Data Out (do) - Pin 12
Org Select (org) - Pin 8
The red cable on the SOP8 clamp indicates pin 1 and should be orinted to the corner marked with a small dot on the EEPROM
8 7 6 5
_ | _ | _ | _ | _
| |
| |
| O |
¯ | ¯ | ¯ | ¯ | ¯
1 2 3 4
./avr/avrdude.exe -c arduino -P <port> -b 115200 -p atmega328p -D -U flash:w:firmware/firmware.hex:i