Skip to content
HomeKid edited this page Sep 5, 2019 · 20 revisions

Welcome to the  Homekit WS2812B controller wiki!

Basic information


  • WS2812B LEDs are have much higher power usage over a certain distance - 18 Watts max (~3.5 Amps @ 5V for 60 LED / meter strips) per meter! The max rating is assuming all the LEDs are on full white, usually the actual current for colorful design is about 1/3 to 1/2 the max current. A good power supply such as a 5V 10A supply is key!


  • Maximum number of LEDs are limited to 300 LEDs. This could be 10 meters of length using 30 LED/meter WS2812B strips. Below that number any length everything should work properly!


  • This code provides a reset solution. If something goes wrong, You can reset the module to factory settings! The Wi-Fi and HomeKit configuration will be reseted. Visit Setup page for more information.


Clone this wiki locally