This repository contains the IBM Command-line Interface (CLI) Python client, which establishes terminal connection with IBM Spectrum Virtualize storage systems. The Python client protocol enables full management and monitoring of these storage arrays by issuing dedicated command-line interface (CLI) commands.
Clone the repository, and then add it to your PYTHONPATH directory. The Python client is then ready for import and use.
Usage examples of the Python client are available in the examples.py file.
Each storage system and major software version has its own set of CLI commands. The commands are detailed in the CLI reference guides that are available on IBM Knowledge Center (KC).
To display the full CLI Reference Guide of a specific storage system and a specific software version:
- Navigate to a storage system welcome page on KC:
IBM SAN Volume Controller on IBM Knowledge Center: http://www.ibm.com/support/knowledgecenter/STPVGU
IBM Storwize V3500 on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/STLM6B
IBM Storwize V3700 on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/STLM5A
IBM Storwize V5000 on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/STHGUJ
IBM Storwize V7000 on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/ST3FR7
IBM Storwize V7000 Unified on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/ST5Q4U
IBM FlashSystem V9000 on IBM Knowledge Center: http://ibm.com/support/knowledgecenter/STKMQV
- On the welcome page, select a storage system software version. For example, select Version 8.2.1.
The welcome page of the selected software version is displayed.
- If needed, select the Table of contents tab.
- On the table of contents, click Command-line interface.
- Refer to Host commands and to all subsequent chapters.
We do not accept any contributions at the moment. This may change in the future, so you can fork, clone, and suggest a pull request.
Use nosetests command to run a test.
nosetests -v