Skip to content

Latest commit

 

History

History
31 lines (23 loc) · 1.04 KB

index.rst

File metadata and controls

31 lines (23 loc) · 1.04 KB
Raw

Arduino Getting Started

Compatible Kits <arduino-compatible-kits.rst> Library Installation <arduino-lib-installation.rst> Arduino API usage <arduino-api.rst> Examples <arduino-examples.rst>

Software

  1. Follow the instructions in arduino-lib-installation to install the required software and libraries.
  2. Choose a suitable example sketch <arduino-examples> and upload the code to your Arduino.

Hardware

  1. Connect your shield to a Microcontroller board <arduino-compatible-kits> supported by this library.
  2. Set some jumpers on the board like explained here <Jumper settings>
  3. Connect your motor(s) to the screw terminals.
  4. Connect a 12V DC power supply with current limitation.

Ready!

Switch on the power supply and control your motor(s) with the serial monitor in the Arduino IDE. Refer to arduino-api and Keyboard commands for more details on how to use the example sketches.