Skip to content

Latest commit

 

History

History
79 lines (53 loc) · 5.22 KB

README.md

File metadata and controls

79 lines (53 loc) · 5.22 KB

Isotropic Reconstruction of Electron Tomograms with Deep Learning

IsoNet version 0.2

DOI

Update on July8 2022

We maintain an IsoNet Google group for discussions or news.

To subscribe or visit the group via the web interface please visit https://groups.google.com/u/1/g/isonet.

If you do not have and are not willing to create a Google login, you can also request membership by sending an email to yuntao@g.ucla.edu

After your request is approved, you will be added to the group and will receive a confirmation email. Once subscribed, we request that you edit your membership settings so that your display name is your real name.

To post to the forum you can either use the web interface or email to isonet@googlegroups.com

Installation

python version at least 3.5 is required. If you download the package as a zip file from github, please rename the folder IsoNet-master to IsoNet.

  1. IsoNet relies on Tensorflow with version at least 2.0

Please find your cuda version, cuDNN version and corresponding tensorflow version here: https://www.tensorflow.org/install/source#gpu.

For example, if you are using cuda 10.1, you should install tensorflow 2.3:

pip install tensorflow-gpu==2.3.0
  1. Install other dependencies
pip install -r requirements.txt
  1. Add environment variables:

For example add following lines in your ~/.bashrc

export PATH=PATH_TO_ISONET_FOLDER/bin:$PATH 

export PYTHONPATH=PATH_TO_PARENT_FOLDER_OF_ISONET_FOLDER:$PYTHONPATH 

or you can run source source-env.sh in your terminal, which will export required variables into your environment.

  1. Open a new terminal, enter your working directory and run
isonet.py check

Tutorial data set and tutorial videos are on google drive https://drive.google.com/drive/folders/1DXjIsz6-EiQm7mBMuMHHwdZErZ_bXAgp

FAQ:

1. IsoNet refine raise OOM error.

This is caused by the insufficient GPU memory. The solutions are:

  1. Specify a smaller batch_size or use more(powerful) GPUs. The default batch_size is 4 if you use one GPU, otherwise the default batch_size is 2 times the number of GPU. Please note the batch_size should be divisible by number of GPUs. For example, if you have one GPU and get OOM error, please reduce the batch_size to 1 or 2; If you use 4 GPUs and get OOM error, please reduce the batch_size to 4.

  2. Refine with a smaller cube_size (not recommended).

2. IsoNet extract ValueError: a must be greater than 0 unless no samples are taken

This could be due to the tomogram thickness is smaller than the size of subtomograms to be extracted. Please make your tomogram thicker in this case.

3. Can not see significant improvement after processing with IsoNet

IsoNet is kind of conservative in adding information into missing wedge region. If it can not find reasonable prediction, IsoNet may simply returns the original tomograms back to you. However, there are some ways to increase your success rate.

  1. IsoNet performs better in high contrast tomograms. That means it will be helpful to tweak the parameters (especially snrfalloff) in CTF deconvolution step to make increase the weight of low resolution information. Or trying with the data acquired with phaseplate first. As far as we know, phaseplate data will always give you good result.

  2. Missing wedge caused the nonlocal distributed information. You may observed the long shadows of gold beads in the tomograms, and those long rays can not be fully corrected with sub-tomogram based missing correction in IsoNet, because the receptive field of the network is limited to your subtomogram. This nonlocal information makes it particular difficult to recover the horizontal oriented membrane. There are several ways to improve. First, training with subtomograms with larger cube size, the default cube size is 64, you may want to increase the size to 80, 96, 112 or 128, however this may lead to the OOM error Please refer to FAQ #1 when you have this problem. Second, bin your tomograms more. Sometimes we even bin our cellular tomograms to 20A/pix for IsoNet processing, this will of course increase your network receptive field, given the same size of subtomogram.

  3. IsoNet is currently designed to correct missing wedge for tomograms with -60 to 60 degrees tilt range. The other tilt scheme or when the tomograms have large x axis tilt. The results might not be optimal.

4. Can not create a good mask during mask generation step

The mask is only important if the sample is sparsely located in the tomograms. And the mask do not need to be perfect to obtain good result, in other words, including many empty/unwanted subtomograms during the refinement can be tolerated.

To obtain a good mask, the tomograms should have sufficient contrast, which can be achieved by CTF deconvolution. User defined mask can also be supplied by changing the mask_name field in the star file. Alternately, you can also use subtomograms extracted with other methods and skip the entire mask creation and subtomograms extraction steps.

If you want to exclude carbon area of the tomograms, you can try the new mask boundary feature in version 0.2. It allows you to draw a polygon in 3dmod so that the area outside the polygon will be excluded.