range.jl

# This file is a part of Julia. License is MIT: http://julialang.org/license

## 1-dimensional ranges ##

typealias Dims Tuple{Vararg{Int}}
typealias DimsInteger Tuple{Vararg{Integer}}

abstract Range{T} <: AbstractArray{T,1}

## ordinal ranges

abstract OrdinalRange{T,S} <: Range{T}

immutable StepRange{T,S} <: OrdinalRange{T,S}
    start::T
    step::S
    stop::T

    function StepRange(start::T, step::S, stop::T)
        new(start, step, steprange_last(start,step,stop))
    end
end

# to make StepRange constructor inlineable, so optimizer can see `step` value
function steprange_last{T}(start::T, step, stop)
    if isa(start,AbstractFloat) || isa(step,AbstractFloat)
        throw(ArgumentError("StepRange should not be used with floating point"))
    end
    z = zero(step)
    step == z && throw(ArgumentError("step cannot be zero"))

    if stop == start
        last = stop
    else
        if (step > z) != (stop > start)
            # empty range has a special representation where stop = start-1
            # this is needed to avoid the wrap-around that can happen computing
            # start - step, which leads to a range that looks very large instead
            # of empty.
            if step > z
                last = start - one(stop-start)
            else
                last = start + one(stop-start)
            end
        else
            diff = stop - start
            if T<:Signed && (diff > zero(diff)) != (stop > start)
                # handle overflowed subtraction with unsigned rem
                if diff > zero(diff)
                    remain = -convert(T, unsigned(-diff) % step)
                else
                    remain = convert(T, unsigned(diff) % step)
                end
            else
                remain = steprem(start,stop,step)
            end
            last = stop - remain
        end
    end
    last
end

steprem(start,stop,step) = (stop-start) % step

StepRange{T,S}(start::T, step::S, stop::T) = StepRange{T,S}(start, step, stop)

immutable UnitRange{T<:Real} <: OrdinalRange{T,Int}
    start::T
    stop::T
    UnitRange(start, stop) = new(start, unitrange_last(start,stop))
end
UnitRange{T<:Real}(start::T, stop::T) = UnitRange{T}(start, stop)

unitrange_last(::Bool, stop::Bool) = stop
unitrange_last{T<:Integer}(start::T, stop::T) =
    ifelse(stop >= start, stop, convert(T,start-one(stop-start)))
unitrange_last{T}(start::T, stop::T) =
    ifelse(stop >= start, convert(T,start+floor(stop-start)),
                          convert(T,start-one(stop-start)))

colon(a::Real, b::Real) = colon(promote(a,b)...)

colon{T<:Real}(start::T, stop::T) = UnitRange{T}(start, stop)

range(a::Real, len::Integer) = UnitRange{typeof(a)}(a, oftype(a, a+len-1))

colon{T}(start::T, stop::T) = StepRange(start, one(stop-start), stop)

range{T}(a::T, len::Integer) =
    StepRange{T, typeof(a-a)}(a, one(a-a), a+oftype(a-a,(len-1)))

# first promote start and stop, leaving step alone
# this is for non-numeric ranges where step can be quite different
colon{A<:Real,C<:Real}(a::A, b, c::C) = colon(convert(promote_type(A,C),a), b, convert(promote_type(A,C),c))

colon{T<:Real}(start::T, step, stop::T) = StepRange(start, step, stop)
colon{T<:Real}(start::T, step::T, stop::T) = StepRange(start, step, stop)
colon{T<:Real}(start::T, step::Real, stop::T) = StepRange(promote(start, step, stop)...)

colon{T}(start::T, step, stop::T) = StepRange(start, step, stop)

range{T,S}(a::T, step::S, len::Integer) = StepRange{T,S}(a, step, convert(T, a+step*(len-1)))

## floating point ranges

immutable FloatRange{T<:AbstractFloat} <: Range{T}
    start::T
    step::T
    len::T
    divisor::T
end
FloatRange(a::AbstractFloat, s::AbstractFloat, l::Real, d::AbstractFloat) =
    FloatRange{promote_type(typeof(a),typeof(s),typeof(d))}(a,s,l,d)

# float rationalization helper
function rat(x)
    y = x
    a = d = 1
    b = c = 0
    m = maxintfloat(Float32)
    while abs(y) <= m
        f = trunc(Int,y)
        y -= f
        a, c = f*a + c, a
        b, d = f*b + d, b
        max(abs(a),abs(b)) <= convert(Int,m) || return c, d
        oftype(x,a)/oftype(x,b) == x && break
        y = inv(y)
    end
    return a, b
end

function colon{T<:AbstractFloat}(start::T, step::T, stop::T)
    step == 0 && throw(ArgumentError("range step cannot be zero"))
    start == stop && return FloatRange{T}(start,step,1,1)
    (0 < step) != (start < stop) && return FloatRange{T}(start,step,0,1)

    # float range "lifting"
    r = (stop-start)/step
    n = round(r)
    lo = prevfloat((prevfloat(stop)-nextfloat(start))/n)
    hi = nextfloat((nextfloat(stop)-prevfloat(start))/n)
    if lo <= step <= hi
        a0, b = rat(start)
        a = convert(T,a0)
        if a/convert(T,b) == start
            c0, d = rat(step)
            c = convert(T,c0)
            if c/convert(T,d) == step
                e = lcm(b,d)
                a *= div(e,b)
                c *= div(e,d)
                eT = convert(T,e)
                if (a+n*c)/eT == stop
                    return FloatRange{T}(a, c, n+1, eT)
                end
            end
        end
    end
    FloatRange{T}(start, step, floor(r)+1, one(step))
end

colon{T<:AbstractFloat}(a::T, b::T) = colon(a, one(a), b)

colon{T<:Real}(a::T, b::AbstractFloat, c::T) = colon(promote(a,b,c)...)
colon{T<:AbstractFloat}(a::T, b::AbstractFloat, c::T) = colon(promote(a,b,c)...)
colon{T<:AbstractFloat}(a::T, b::Real, c::T) = colon(promote(a,b,c)...)

range(a::AbstractFloat, len::Integer) = FloatRange(a,one(a),len,one(a))
range(a::AbstractFloat, st::AbstractFloat, len::Integer) = FloatRange(a,st,len,one(a))
range(a::Real, st::AbstractFloat, len::Integer) = FloatRange(float(a), st, len, one(st))
range(a::AbstractFloat, st::Real, len::Integer) = FloatRange(a, float(st), len, one(a))

## linspace and logspace

immutable LinSpace{T<:AbstractFloat} <: Range{T}
    start::T
    stop::T
    len::T
    divisor::T
end

function linspace{T<:AbstractFloat}(start::T, stop::T, len::T)
    len == round(len) || throw(InexactError())
    0 <= len || error("linspace($start, $stop, $len): negative length")
    if len == 0
        n = convert(T, 2)
        if isinf(n*start) || isinf(n*stop)
            start /= n; stop /= n; n = one(T)
        end
        return LinSpace(-start, -stop, -one(T), n)
    end
    if len == 1
        start == stop || error("linspace($start, $stop, $len): endpoints differ")
        return LinSpace(-start, -start, zero(T), one(T))
    end
    n = convert(T, len - 1)
    len - n == 1 || error("linspace($start, $stop, $len): too long for $T")
    a0, b = rat(start)
    a = convert(T,a0)
    if a/convert(T,b) == start
        c0, d = rat(stop)
        c = convert(T,c0)
        if c/convert(T,d) == stop
            e = lcm(b,d)
            a *= div(e,b)
            c *= div(e,d)
            s = convert(T,n*e)
            if isinf(a*n) || isinf(c*n)
                s, p = frexp(s)
                p2 = oftype(s,2)^p
                a /= p2; c /= p2
            end
            if a*n/s == start && c*n/s == stop
                return LinSpace(a, c, len, s)
            end
        end
    end
    a, c, s = start, stop, n
    if isinf(a*n) || isinf(c*n)
        s, p = frexp(s)
        p2 = oftype(s,2)^p
        a /= p2; c /= p2
    end
    if a*n/s == start && c*n/s == stop
        return LinSpace(a, c, len, s)
    end
    return LinSpace(start, stop, len, n)
end
function linspace{T<:AbstractFloat}(start::T, stop::T, len::Real)
    T_len = convert(T, len)
    T_len == len || throw(InexactError())
    linspace(start, stop, T_len)
end
linspace(start::Real, stop::Real, len::Real=50) =
    linspace(promote(AbstractFloat(start), AbstractFloat(stop))..., len)

function show(io::IO, r::LinSpace)
    print(io, "linspace(")
    show(io, first(r))
    print(io, ',')
    show(io, last(r))
    print(io, ',')
    show(io, length(r))
    print(io, ')')
end

"""
`print_range(io, r)` prints out a nice looking range r in terms of its elements
as if it were `collect(r)`, dependent on the size of the
terminal, and taking into account whether compact numbers should be shown.
It figures out the width in characters of each element, and if they
end up too wide, it shows the first and last elements separated by a
horizontal elipsis. Typical output will look like `1.0,2.0,3.0,…,4.0,5.0,6.0`.

`print_range(io, r, sz, pre, sep, post, hdots)` uses optional
parameters `sz` for the (rows,cols) of the screen,
`pre` and `post` characters for each printed row, `sep` separator string between
printed elements, `hdots` string for the horizontal ellipsis.
"""
function print_range(io::IO, r::Range,
                     sz::Tuple{Integer, Integer} = (s = tty_size(); (s[1]-4, s[2])),
                     pre::AbstractString = " ",
                     sep::AbstractString = ",",
                     post::AbstractString = "",
                     hdots::AbstractString = ",\u2026,") # horiz ellipsis
    # This function borrows from print_matrix() in show.jl
    # and should be called by writemime (replutil.jl) and by display()
    screenheight, screenwidth = sz
    screenwidth -= length(pre) + length(post)
    postsp = ""
    sepsize = length(sep)
    m = 1 # treat the range as a one-row matrix
    n = length(r)
    # Figure out spacing alignments for r, but only need to examine the
    # left and right edge columns, as many as could conceivably fit on the
    # screen, with the middle columns summarized by horz, vert, or diag ellipsis
    maxpossiblecols = div(screenwidth, 1+sepsize) # assume each element is at least 1 char + 1 separator
    colsr = n <= maxpossiblecols ? (1:n) : [1:div(maxpossiblecols,2)+1; (n-div(maxpossiblecols,2)):n]
    rowmatrix = r[colsr]' # treat the range as a one-row matrix for print_matrix_row
    A = alignment(rowmatrix,1:m,1:length(rowmatrix),screenwidth,screenwidth,sepsize) # how much space range takes
    if n <= length(A) # cols fit screen, so print out all elements
        print(io, pre) # put in pre chars
        print_matrix_row(io,rowmatrix,A,1,1:n,sep) # the entire range
        print(io, post) # add the post characters
    else # cols don't fit so put horiz ellipsis in the middle
        # how many chars left after dividing width of screen in half
        # and accounting for the horiz ellipsis
        c = div(screenwidth-length(hdots)+1,2)+1 # chars remaining for each side of rowmatrix
        alignR = reverse(alignment(rowmatrix,1:m,length(rowmatrix):-1:1,c,c,sepsize)) # which cols of rowmatrix to put on the right
        c = screenwidth - sum(map(sum,alignR)) - (length(alignR)-1)*sepsize - length(hdots)
        alignL = alignment(rowmatrix,1:m,1:length(rowmatrix),c,c,sepsize) # which cols of rowmatrix to put on the left
        print(io, pre)   # put in pre chars
        print_matrix_row(io, rowmatrix,alignL,1,1:length(alignL),sep) # left part of range
        print(io, hdots) # horizontal ellipsis
        print_matrix_row(io, rowmatrix,alignR,1,length(rowmatrix)-length(alignR)+1:length(rowmatrix),sep) # right part of range
        print(io, post)  # post chars
    end
end

logspace(start::Real, stop::Real, n::Integer=50) = 10.^linspace(start, stop, n)

## interface implementations

size(r::Range) = (length(r),)

isempty(r::StepRange) =
    (r.start != r.stop) & ((r.step > zero(r.step)) != (r.stop > r.start))
isempty(r::UnitRange) = r.start > r.stop
isempty(r::FloatRange) = length(r) == 0
isempty(r::LinSpace) = length(r) == 0

step(r::StepRange) = r.step
step(r::UnitRange) = 1
step(r::FloatRange) = r.step/r.divisor
step{T}(r::LinSpace{T}) = ifelse(r.len <= 0, convert(T,NaN), (r.stop-r.start)/r.divisor)

function length(r::StepRange)
    n = Integer(div(r.stop+r.step - r.start, r.step))
    isempty(r) ? zero(n) : n
end
length(r::UnitRange) = Integer(r.stop - r.start + 1)
length(r::FloatRange) = Integer(r.len)
length(r::LinSpace) = Integer(r.len + signbit(r.len - 1))

function length{T<:Union{Int,UInt,Int64,UInt64}}(r::StepRange{T})
    isempty(r) && return zero(T)
    if r.step > 1
        return checked_add(convert(T, div(unsigned(r.stop - r.start), r.step)), one(T))
    elseif r.step < -1
        return checked_add(convert(T, div(unsigned(r.start - r.stop), -r.step)), one(T))
    else
        checked_add(div(checked_sub(r.stop, r.start), r.step), one(T))
    end
end

length{T<:Union{Int,Int64}}(r::UnitRange{T}) =
    checked_add(checked_sub(r.stop, r.start), one(T))

length{T<:Union{UInt,UInt64}}(r::UnitRange{T}) =
    r.stop < r.start ? zero(T) : checked_add(r.stop - r.start, one(T))

# some special cases to favor default Int type
let smallint = (Int === Int64 ?
                Union{Int8,UInt8,Int16,UInt16,Int32,UInt32} :
                Union{Int8,UInt8,Int16,UInt16})
    global length

    function length{T <: smallint}(r::StepRange{T})
        isempty(r) && return Int(0)
        div(Int(r.stop)+Int(r.step) - Int(r.start), Int(r.step))
    end

    length{T <: smallint}(r::UnitRange{T}) = Int(r.stop) - Int(r.start) + 1
end

first{T}(r::OrdinalRange{T}) = convert(T, r.start)
first{T}(r::FloatRange{T}) = convert(T, r.start/r.divisor)
first{T}(r::LinSpace{T}) = convert(T, (r.len-1)*r.start/r.divisor)

last{T}(r::StepRange{T}) = r.stop
last(r::UnitRange) = r.stop
last{T}(r::FloatRange{T}) = convert(T, (r.start + (r.len-1)*r.step)/r.divisor)
last{T}(r::LinSpace{T}) = convert(T, (r.len-1)*r.stop/r.divisor)

minimum(r::UnitRange) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : first(r)
maximum(r::UnitRange) = isempty(r) ? throw(ArgumentError("range must be non-empty")) : last(r)
minimum(r::Range)  = isempty(r) ? throw(ArgumentError("range must be non-empty")) : min(first(r), last(r))
maximum(r::Range)  = isempty(r) ? throw(ArgumentError("range must be non-empty")) : max(first(r), last(r))

ctranspose(r::Range) = [x for _=1, x=r]
transpose(r::Range) = r'

# Ranges are immutable
copy(r::Range) = r


## iteration

start(r::FloatRange) = 0
done(r::FloatRange, i::Int) = length(r) <= i
next{T}(r::FloatRange{T}, i::Int) =
    (convert(T, (r.start + i*r.step)/r.divisor), i+1)

start(r::LinSpace) = 1
done(r::LinSpace, i::Int) = length(r) < i
next{T}(r::LinSpace{T}, i::Int) =
    (convert(T, ((r.len-i)*r.start + (i-1)*r.stop)/r.divisor), i+1)

# NOTE: For ordinal ranges, we assume start+step might be from a
# lifted domain (e.g. Int8+Int8 => Int); use that for iterating.
start(r::StepRange) = convert(typeof(r.start+r.step), r.start)
next{T}(r::StepRange{T}, i) = (convert(T,i), i+r.step)
done{T,S}(r::StepRange{T,S}, i) = isempty(r) | (i < min(r.start, r.stop)) | (i > max(r.start, r.stop))
done{T,S}(r::StepRange{T,S}, i::Integer) = isempty(r) | (i == r.stop+r.step)

start(r::UnitRange) = oftype(r.start+1, r.start)
next{T}(r::UnitRange{T}, i) = (convert(T,i), i+1)
done(r::UnitRange, i) = i==oftype(i,r.stop)+1


## indexing

getindex(r::Range, i::Integer) = (checkbounds(r, i); unsafe_getindex(r, i))
unsafe_getindex{T}(v::Range{T}, i::Integer) = convert(T, first(v) + (i-1)*step(v))

getindex{T}(r::FloatRange{T}, i::Integer) = (checkbounds(r, i); unsafe_getindex(r, i))
unsafe_getindex{T}(r::FloatRange{T}, i::Integer) = convert(T, (r.start + (i-1)*r.step)/r.divisor)

getindex{T}(r::LinSpace{T}, i::Integer) = (checkbounds(r, i); unsafe_getindex(r, i))
unsafe_getindex{T}(r::LinSpace{T}, i::Integer) = convert(T, ((r.len-i)*r.start + (i-1)*r.stop)/r.divisor)

getindex(r::Range, ::Colon) = copy(r)
unsafe_getindex(r::Range, ::Colon) = copy(r)

getindex{T<:Integer}(r::UnitRange, s::UnitRange{T}) = (checkbounds(r, s); unsafe_getindex(r, s))
function unsafe_getindex{T<:Integer}(r::UnitRange, s::UnitRange{T})
    st = oftype(r.start, r.start + s.start-1)
    range(st, length(s))
end

getindex{T<:Integer}(r::UnitRange, s::StepRange{T}) = (checkbounds(r, s); unsafe_getindex(r, s))
function unsafe_getindex{T<:Integer}(r::UnitRange, s::StepRange{T})
    st = oftype(r.start, r.start + s.start-1)
    range(st, step(s), length(s))
end

getindex{T<:Integer}(r::StepRange, s::Range{T}) = (checkbounds(r, s); unsafe_getindex(r, s))
function unsafe_getindex{T<:Integer}(r::StepRange, s::Range{T})
    st = oftype(r.start, r.start + (first(s)-1)*step(r))
    range(st, step(r)*step(s), length(s))
end

getindex(r::FloatRange, s::OrdinalRange) = (checkbounds(r, s); unsafe_getindex(r, s))
function unsafe_getindex(r::FloatRange, s::OrdinalRange)
    FloatRange(r.start + (first(s)-1)*r.step, step(s)*r.step, length(s), r.divisor)
end

getindex(r::LinSpace, s::OrdinalRange) = (checkbounds(r, s); unsafe_getindex(r, s))
function unsafe_getindex{T}(r::LinSpace{T}, s::OrdinalRange)
    sl::T = length(s)
    ifirst = first(s)
    ilast = last(s)
    vfirst::T = ((r.len - ifirst) * r.start + (ifirst - 1) * r.stop) / r.divisor
    vlast::T = ((r.len - ilast) * r.start + (ilast - 1) * r.stop) / r.divisor
    return linspace(vfirst, vlast, sl)
end

function show(io::IO, r::Range)
    print(io, repr(first(r)), ':', repr(step(r)), ':', repr(last(r)))
end
show(io::IO, r::UnitRange) = print(io, repr(first(r)), ':', repr(last(r)))

=={T<:Range}(r::T, s::T) = (first(r) == first(s)) & (step(r) == step(s)) & (last(r) == last(s))
==(r::OrdinalRange, s::OrdinalRange) = (first(r) == first(s)) & (step(r) == step(s)) & (last(r) == last(s))
=={T<:LinSpace}(r::T, s::T) = (first(r) == first(s)) & (length(r) == length(s)) & (last(r) == last(s))

function ==(r::Range, s::Range)
    lr = length(r)
    if lr != length(s)
        return false
    end
    u, v = start(r), start(s)
    while !done(r, u)
        x, u = next(r, u)
        y, v = next(s, v)
        if x != y
            return false
        end
    end
    return true
end

intersect{T1<:Integer, T2<:Integer}(r::UnitRange{T1}, s::UnitRange{T2}) = max(r.start,s.start):min(last(r),last(s))

intersect{T<:Integer}(i::Integer, r::UnitRange{T}) =
    i < first(r) ? (first(r):i) :
    i > last(r)  ? (i:last(r))  : (i:i)

intersect{T<:Integer}(r::UnitRange{T}, i::Integer) = intersect(i, r)

function intersect{T1<:Integer, T2<:Integer}(r::UnitRange{T1}, s::StepRange{T2})
    if isempty(s)
        range(first(r), 0)
    elseif step(s) == 0
        intersect(first(s), r)
    elseif step(s) < 0
        intersect(r, reverse(s))
    else
        sta = first(s)
        ste = step(s)
        sto = last(s)
        lo = first(r)
        hi = last(r)
        i0 = max(sta, lo + mod(sta - lo, ste))
        i1 = min(sto, hi - mod(hi - sta, ste))
        i0:ste:i1
    end
end

function intersect{T1<:Integer, T2<:Integer}(r::StepRange{T1}, s::UnitRange{T2})
    if step(r) < 0
        reverse(intersect(s, reverse(r)))
    else
        intersect(s, r)
    end
end

function intersect(r::StepRange, s::StepRange)
    if isempty(r) || isempty(s)
        return range(first(r), step(r), 0)
    elseif step(s) < 0
        return intersect(r, reverse(s))
    elseif step(r) < 0
        return reverse(intersect(reverse(r), s))
    end

    start1 = first(r)
    step1 = step(r)
    stop1 = last(r)
    start2 = first(s)
    step2 = step(s)
    stop2 = last(s)
    a = lcm(step1, step2)

    # if a == 0
    #     # One or both ranges have step 0.
    #     if step1 == 0 && step2 == 0
    #         return start1 == start2 ? r : Range(start1, 0, 0)
    #     elseif step1 == 0
    #         return start2 <= start1 <= stop2 && rem(start1 - start2, step2) == 0 ? r : Range(start1, 0, 0)
    #     else
    #         return start1 <= start2 <= stop1 && rem(start2 - start1, step1) == 0 ? (start2:step1:start2) : Range(start1, step1, 0)
    #     end
    # end

    g, x, y = gcdx(step1, step2)

    if rem(start1 - start2, g) != 0
        # Unaligned, no overlap possible.
        return range(start1, a, 0)
    end

    z = div(start1 - start2, g)
    b = start1 - x * z * step1
    # Possible points of the intersection of r and s are
    # ..., b-2a, b-a, b, b+a, b+2a, ...
    # Determine where in the sequence to start and stop.
    m = max(start1 + mod(b - start1, a), start2 + mod(b - start2, a))
    n = min(stop1 - mod(stop1 - b, a), stop2 - mod(stop2 - b, a))
    m:a:n
end

function intersect(r1::Range, r2::Range, r3::Range, r::Range...)
    i = intersect(intersect(r1, r2), r3)
    for t in r
        i = intersect(i, t)
    end
    i
end

# findin (the index of intersection)
function _findin{T1<:Integer, T2<:Integer}(r::Range{T1}, span::UnitRange{T2})
    local ifirst
    local ilast
    fspan = first(span)
    lspan = last(span)
    fr = first(r)
    lr = last(r)
    sr = step(r)
    if sr > 0
        ifirst = fr >= fspan ? 1 : ceil(Integer,(fspan-fr)/sr)+1
        ilast = lr <= lspan ? length(r) : length(r) - ceil(Integer,(lr-lspan)/sr)
    elseif sr < 0
        ifirst = fr <= lspan ? 1 : ceil(Integer,(lspan-fr)/sr)+1
        ilast = lr >= fspan ? length(r) : length(r) - ceil(Integer,(lr-fspan)/sr)
    else
        ifirst = fr >= fspan ? 1 : length(r)+1
        ilast = fr <= lspan ? length(r) : 0
    end
    ifirst, ilast
end

function findin{T1<:Integer, T2<:Integer}(r::UnitRange{T1}, span::UnitRange{T2})
    ifirst, ilast = _findin(r, span)
    ifirst:ilast
end

function findin{T1<:Integer, T2<:Integer}(r::Range{T1}, span::UnitRange{T2})
    ifirst, ilast = _findin(r, span)
    ifirst:1:ilast
end

## linear operations on ranges ##

-(r::OrdinalRange) = range(-r.start, -step(r), length(r))
-(r::FloatRange)   = FloatRange(-r.start, -r.step, r.len, r.divisor)
-(r::LinSpace)     = LinSpace(-r.start, -r.stop, r.len, r.divisor)

.+(x::Real, r::UnitRange)  = range(x + r.start, length(r))
.+(x::Real, r::Range) = (x+first(r)):step(r):(x+last(r))
#.+(x::Real, r::StepRange)  = range(x + r.start, r.step, length(r))
.+(x::Real, r::FloatRange) = FloatRange(r.divisor*x + r.start, r.step, r.len, r.divisor)
function .+{T}(x::Real, r::LinSpace{T})
    x2 = x * r.divisor / (r.len - 1)
    LinSpace(x2 + r.start, x2 + r.stop, r.len, r.divisor)
end
.+(r::Range, x::Real)      = x + r
#.+(r::FloatRange, x::Real) = x + r

.-(x::Real, r::Range)      = (x-first(r)):-step(r):(x-last(r))
.-(x::Real, r::FloatRange) = FloatRange(r.divisor*x - r.start, -r.step, r.len, r.divisor)
function .-(x::Real, r::LinSpace)
    x2 = x * r.divisor / (r.len - 1)
    LinSpace(x2 - r.start, x2 - r.stop, r.len, r.divisor)
end
.-(r::UnitRange, x::Real)  = range(r.start-x, length(r))
.-(r::StepRange , x::Real) = range(r.start-x, r.step, length(r))
.-(r::FloatRange, x::Real) = FloatRange(r.start - r.divisor*x, r.step, r.len, r.divisor)
function .-(r::LinSpace, x::Real)
    x2 = x * r.divisor / (r.len - 1)
    LinSpace(r.start - x2, r.stop - x2, r.len, r.divisor)
end

.*(x::Real, r::OrdinalRange) = range(x*r.start, x*step(r), length(r))
.*(x::Real, r::FloatRange)   = FloatRange(x*r.start, x*r.step, r.len, r.divisor)
.*(x::Real, r::LinSpace)     = LinSpace(x * r.start, x * r.stop, r.len, r.divisor)
.*(r::Range, x::Real)        = x .* r
.*(r::FloatRange, x::Real)   = x .* r
.*(r::LinSpace, x::Real)     = x .* r

./(r::OrdinalRange, x::Real) = range(r.start/x, step(r)/x, length(r))
./(r::FloatRange, x::Real)   = FloatRange(r.start/x, r.step/x, r.len, r.divisor)
./(r::LinSpace, x::Real)     = LinSpace(r.start / x, r.stop / x, r.len, r.divisor)

promote_rule{T1,T2}(::Type{UnitRange{T1}},::Type{UnitRange{T2}}) =
    UnitRange{promote_type(T1,T2)}
convert{T}(::Type{UnitRange{T}}, r::UnitRange{T}) = r
convert{T}(::Type{UnitRange{T}}, r::UnitRange) = UnitRange{T}(r.start, r.stop)

promote_rule{T1a,T1b,T2a,T2b}(::Type{StepRange{T1a,T1b}},::Type{StepRange{T2a,T2b}}) =
    StepRange{promote_type(T1a,T2a),promote_type(T1b,T2b)}
convert{T1,T2}(::Type{StepRange{T1,T2}}, r::StepRange{T1,T2}) = r

promote_rule{T1a,T1b,T2}(::Type{StepRange{T1a,T1b}},::Type{UnitRange{T2}}) =
    StepRange{promote_type(T1a,T2),promote_type(T1b,T2)}
convert{T1,T2}(::Type{StepRange{T1,T2}}, r::Range) =
    StepRange{T1,T2}(convert(T1, first(r)), convert(T2, step(r)), convert(T1, last(r)))
convert{T}(::Type{StepRange}, r::UnitRange{T}) =
    StepRange{T,T}(first(r), step(r), last(r))

promote_rule{T1,T2}(::Type{FloatRange{T1}},::Type{FloatRange{T2}}) =
    FloatRange{promote_type(T1,T2)}
convert{T}(::Type{FloatRange{T}}, r::FloatRange{T}) = r
convert{T}(::Type{FloatRange{T}}, r::FloatRange) =
    FloatRange{T}(r.start,r.step,r.len,r.divisor)

promote_rule{F,OR<:OrdinalRange}(::Type{FloatRange{F}}, ::Type{OR}) =
    FloatRange{promote_type(F,eltype(OR))}
convert{T}(::Type{FloatRange{T}}, r::OrdinalRange) =
    FloatRange{T}(first(r), step(r), length(r), one(T))
convert{T}(::Type{FloatRange}, r::OrdinalRange{T}) =
    FloatRange{typeof(float(first(r)))}(first(r), step(r), length(r), one(T))

promote_rule{T1,T2}(::Type{LinSpace{T1}},::Type{LinSpace{T2}}) =
    LinSpace{promote_type(T1,T2)}
convert{T}(::Type{LinSpace{T}}, r::LinSpace{T}) = r
convert{T}(::Type{LinSpace{T}}, r::LinSpace) =
    LinSpace{T}(r.start, r.stop, r.len, r.divisor)

promote_rule{F,OR<:OrdinalRange}(::Type{LinSpace{F}}, ::Type{OR}) =
    LinSpace{promote_type(F,eltype(OR))}
convert{T}(::Type{LinSpace{T}}, r::OrdinalRange) =
    linspace(convert(T, first(r)), convert(T, last(r)), convert(T, length(r)))
convert{T}(::Type{LinSpace}, r::OrdinalRange{T}) =
    convert(LinSpace{typeof(float(first(r)))}, r)

# Promote FloatRange to LinSpace
promote_rule{F,OR<:FloatRange}(::Type{LinSpace{F}}, ::Type{OR}) =
    LinSpace{promote_type(F,eltype(OR))}
convert{T}(::Type{LinSpace{T}}, r::FloatRange) =
    linspace(convert(T, first(r)), convert(T, last(r)), convert(T, length(r)))
convert{T}(::Type{LinSpace}, r::FloatRange{T}) =
    convert(LinSpace{T}, r)


# +/- of ranges is defined in operators.jl (to be able to use @eval etc.)

## non-linear operations on ranges and fallbacks for non-real numbers ##

.+(x::Number, r::Range) = [ x+y for y=r ]
.+(r::Range, y::Number) = [ x+y for x=r ]

.-(x::Number, r::Range) = [ x-y for y=r ]
.-(r::Range, y::Number) = [ x-y for x=r ]

.*(x::Number, r::Range) = [ x*y for y=r ]
.*(r::Range, y::Number) = [ x*y for x=r ]

./(x::Number, r::Range) = [ x/y for y=r ]
./(r::Range, y::Number) = [ x/y for x=r ]

.^(x::Number, r::Range) = [ x^y for y=r ]
.^(r::Range, y::Number) = [ x^y for x=r ]

## concatenation ##

function vcat{T}(rs::Range{T}...)
    n::Int = 0
    for ra in rs
        n += length(ra)
    end
    a = Array(T,n)
    i = 1
    for ra in rs, x in ra
        @inbounds a[i] = x
        i += 1
    end
    return a
end

convert{T}(::Type{Array{T,1}}, r::Range{T}) = vcat(r)
collect(r::Range) = vcat(r)

reverse(r::OrdinalRange) = colon(last(r), -step(r), first(r))
reverse(r::FloatRange)   = FloatRange(r.start + (r.len-1)*r.step, -r.step, r.len, r.divisor)
reverse(r::LinSpace)     = LinSpace(r.stop, r.start, r.len, r.divisor)

## sorting ##

issorted(r::UnitRange) = true
issorted(r::Range) = step(r) >= zero(step(r))

sort(r::UnitRange) = r
sort!(r::UnitRange) = r

sort(r::Range) = issorted(r) ? r : reverse(r)

sortperm(r::UnitRange) = 1:length(r)
sortperm(r::Range) = issorted(r) ? (1:1:length(r)) : (length(r):-1:1)

function sum{T<:Real}(r::Range{T})
    l = length(r)
    # note that a little care is required to avoid overflow in l*(l-1)/2
    return l * first(r) + (iseven(l) ? (step(r) * (l-1)) * (l>>1)
                                     : (step(r) * l) * ((l-1)>>1))
end

function sum(r::FloatRange)
    l = length(r)
    if iseven(l)
        s = r.step * (l-1) * (l>>1)
    else
        s = (r.step * l) * ((l-1)>>1)
    end
    return (l * r.start + s)/r.divisor
end


function mean{T<:Real}(r::Range{T})
    isempty(r) && throw(ArgumentError("mean of an empty range is undefined"))
    (first(r) + last(r)) / 2
end

median{T<:Real}(r::Range{T}) = mean(r)

function in(x, r::Range)
    n = step(r) == 0 ? 1 : round(Integer,(x-first(r))/step(r))+1
    n >= 1 && n <= length(r) && r[n] == x
end

in{T<:Integer}(x, r::Range{T}) = isinteger(x) && !isempty(r) && x>=minimum(r) && x<=maximum(r) && (mod(convert(T,x),step(r))-mod(first(r),step(r)) == 0)
in(x::Char, r::Range{Char}) = !isempty(r) && x >= minimum(r) && x <= maximum(r) && (mod(Int(x) - Int(first(r)), step(r)) == 0)