README.md

Custom assembly using Kikit JLC

Due to JLCPCB's new assembly policy, soldering on the bottom side or using a non-black PCB will incur additional charges.
Bottom side soldering is not possible if the "Economic" assembly option is selected.

As the bottom side soldering is only for the connector, manual assembly is recommended.

Panalize and Fab

kikit panelize ^
    -p :jlcTooling ^
    --layout "grid; rows: 5; cols: 10;" ^
    --source "tolerance: 1000mm" ^
    --tabs full ^
    --cuts vcuts ./KTracker.kicad_pcb ^
    KTracker_panel.kicad_pcb

kikit fab jlcpcb ^
    --assembly ^
    --schematic ./KTracker.kicad_sch ^
    --ignore J1 ^
    --no-drc ./KTracker_panel.kicad_pcb ^
    ./fab

Only Fab

Using internal MPU-6050+QMC5883L and bottom Lipo

kikit fab jlcpcb ^
    --assembly ^
    --schematic ./KTracker.kicad_sch ^
    --ignore BT1,J3,J4,J5 ^
    --no-drc ./KTracker.kicad_pcb ^
    "./Gerber/Using internal MPU-6050+QMC5883L and bottom Lipo"

Using internal MPU-6050+QMC5883L and Left side Lipo

kikit fab jlcpcb ^
    --assembly ^
    --schematic ./KTracker.kicad_sch ^
    --ignore BT1,J1,J4,J5 ^
    --no-drc ./KTracker.kicad_pcb ^
    "./Gerber/Using internal MPU-6050+QMC5883L and Left side Lipo"

Using GY-521 and bottom Lipo

kikit fab jlcpcb ^
    --assembly ^
    --schematic ./KTracker.kicad_sch ^
    --ignore U8,U3,R20,R21,C16,C12,C11,R12,R11,BT1,J3,J4,J5 ^
    --no-drc ./KTracker.kicad_pcb ^
    "./Gerber/Using GY-521 and bottom Lipo"

Using GY-521 and 18650

kikit fab jlcpcb ^
    --assembly ^
    --schematic ./KTracker.kicad_sch ^
    --ignore U8,U3,R20,R21,C16,C12,C11,R12,R11,J1,J3,J4,J5 ^
    --no-drc ./KTracker.kicad_pcb ^
    "./Gerber/Using GY-521 and 18650"