We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hi! In BOM there is a little mistake.
Tactile Push Button Micro Switch - Use 6x6x6mm with TFW8b button caps or 6x6x9mm with 3.1mm A101 Plastic Switch Button Caps
If somebody want to use the A101 Plastic Caps a 6x6mm with 10.5mm - 11mm height ist needed.
The text was updated successfully, but these errors were encountered:
Thank you for reporting this. That should be fixed.
Sorry, something went wrong.
The button height should be exactly 11mm. From the PCB to the top. I measured it again.
Thanks. I'll update the BOM with this.
The BOM file has now been updated with the correct size of the push buttons. Thank you.
No branches or pull requests
Hi!
In BOM there is a little mistake.
Tactile Push Button Micro Switch - Use 6x6x6mm with TFW8b button caps or 6x6x9mm with 3.1mm A101 Plastic Switch Button Caps
If somebody want to use the A101 Plastic Caps a 6x6mm with 10.5mm - 11mm height ist needed.
The text was updated successfully, but these errors were encountered: