multiplier_cluster.rst

Configuration

Variable	Default	Tunable	Description
factor	(no default value)	NO	The value to start counting at.

Input Ports

Port name	Data Type	Flags	Description
factor	integer	_required	The factor to multiply.

Output Ports

Port name	Data Type	Flags	Description
product	integer	_required	Where the product will be available.

Pipefile Usage

The following sections describe the blocks needed to use this process in a pipe file.

Pipefile block

# ================================================================
process <this-proc>
  :: multiplier_cluster
# The value to start counting at.
  factor = <value>
# ================================================================

Process connections

The following Input ports will need to be set

# This process will consume the following input ports
connect from <this-proc>.factor
         to   <upstream-proc>.factor

The following Output ports will need to be set

# This process will produce the following output ports
connect from <this-proc>.product
         to   <downstream-proc>.product

Class Description

sprokit::multiplier_cluster