example-menu.cfg

# This file serves as documentation for config parameters. One may
# copy and edit this file to configure a new menu layout.
# The snippets in this file may be copied into the main printer.cfg file.
# See the "example.cfg" file for description of common config parameters.

# Available menu elements:
#   item - purely visual element
#   command - same like 'item' but with gcode trigger
#   input - same like 'command' but has value changing capabilities
#   list - menu element container, with entry and exit gcode triggers
#   vsdcard - same as 'list' but will append files from virtual sdcard
#   deck - special container for custom screens (cards) has entry and exit gcode triggers.
#   card - special content card for custom screens. Can only be used in 'deck'!

#[menu item1]
#type: item
#   Type will determine menu item properties and behaviours:
#name:
#   This is mandatory attribute for every menu element.
#   You can use Python output formatting for parameter and transform values.
#   Quotes can be used in the beginning and end of name.
#cursor:
#   It allows to change cursor character for selected menu element.
#   The default is >
#   This parameter is optional.
#width:
#   This attribute accepts integer value. Element name is cut to this width.
#   This parameter is optional.
#scroll:
#   This attribute accepts static boolean value. You can use it together with 'width'.
#   When this is enabled then names longer than width are scrolled back and forth.
#   The default is disabled. This parameter is optional.
#enable:
#   This attribute accepts static boolean values and parameters (converted to boolean).
#   It accepts multiple logical expressions. Values separated by comma will return True if all elements are true.
#   Values on different lines will return True if any element is true.
#   You can use logical negation by using character ! as parameter prefix.
#parameter:
#   This attribute accepts float values or special variables. Multiple values are delimited by comma.
#   All available parameter variables can be listed by 'MENU DO=dump' gcode, menu itself must be running.
#   This value is available for output formatting as {0}..{n} Where n is count of parameters.
#transform:
#   This attribute allows to transform parameters value to something else.
#   More than one transformation can be added. Each transformation must be on separate line.
#   These transformed values are available for output formatting as {n+1}..{x}
#   Where n is count of parameters and x is count of transformations.
#   In order to transform the value of a particular parameter, you must add
#   an parameter index as prefix. Like this "transform: 1.choose('OFF','ON')"
#   If the index is not set then the default index 0 is used.
#
#   map(fromLow,fromHigh,toLow,toHigh) - interpolate re-maps a parameter value from one range to another.
#   Output value type is taken from toHigh. It can be int or float.
#
#   choose(e1,e2) - boolean chooser, converts the value of the parameter to the boolean type (0 and 1),
#   and selects the corresponding value by the index from the list.
#
#   choose(e1,e2,...) - int chooser, converts the value of the parameter to the int type
#   and selects the corresponding value by the index from the list.
#
#   choose({key:value,..}) - special dictionary chooser, parameter value cast type by first key type.
#   Selects the corresponding value by the key from the dictionary.
#
#   int(), float(), bool(), str(), abs(), bin(), hex(), oct(), days(), hours(), minutes(), seconds()
#   These will convert parameter value to the special form.
#   int,float,bool,str,abs,bin,hex and oct are python functions.
#   days,hours,minutes,seconds will convert parameter value (it's taken as seconds) to time specific value
#
#   scale(xx) - Multiplies parameter value by this xx. Pure interger or float value is excpected.


#[menu command1]
#type:command
#name:
#cursor:
#width:
#scroll:
#enable:
#parameter:
#transform:
#gcode:
#   When menu element is clicked then gcodes on this attribute will be executed.
#   Can have multiline gcode script and supports output formatting for parameter and transform values.
#action:
#   Special action can be executed. Supports [back, exit] menu commands
#   and [respond response_info] command. Respond command will send '// response_info' to host.

#[menu input1]
#type: input
#name:
#cursor:
#width:
#enable:
#transform:
#parameter:
#   Value from parameter (always index 0) is taken as input value when in edit mode.
#gcode:
#   This will be triggered in realtime mode, on exit from edit mode
#   or in edit mode this will be triggered after click button long press (>0.8sec).
#longpress_gcode:
#   In edit mode this will be triggered after click button long press (>0.8sec).
#   The default is empty. This parameter is optional.
#reverse:
#   This attribute accepts static boolean value.
#   When enabled it will reverse increment and decrement directions for input.
#   The default is False. This parameter is optional.
#readonly:
#   This attribute accepts same logical expression as 'enable'.
#   When true then input element is readonly like 'item' and cannot enter to edit mode.
#   The default is False. This parameter is optional.
#realtime:
#   This attribute accepts static boolean value.
#   When enabled it will execute gcode after each value change.
#   The default is False. This parameter is optional.
#input_min:
#   It accepts integer or float value. Will set minimal bound for edit value.
#   The default is 2.2250738585072014e-308. This parameter is optional.
#input_max:
#   It accepts integer or float value. Will set maximal bound for edit value.
#   The default is 1.7976931348623157e+308. This parameter is optional.
#input_step:
#   This is mandatory attribute for input.
#   It accepts positive integer or float value. Will determine increment
#   and decrement steps for edit value.
#input_step2:
#   This is optional attribute for input.
#   It accepts positive integer or float value. Will determine fast rate
#   increment and decrement steps for edit value.
#   The default is 0 (input_step will be used instead)

#[menu list1]
#type:list or vsdcard
#name:
#cursor:
#width:
#scroll:
#enable:
#enter_gcode:
#   Will trigger gcode script when entering to this menu container.
#   This parameter is optional.
#leave_gcode:
#   Will trigger gcode script when leaving from this menu container.
#   This parameter is optional.
#show_back:
#   This attribute accepts static boolean value.
#   Show back [..] as first element.
#   The default is True. This parameter is optional.
#show_title:
#   This attribute accepts static boolean value.
#   Show container name next to back [..] element.
#   The default is True. This parameter is optional.
#items:
#   Menu elements listed in this container.
#   Each element must be on separate line.
#   Elements can be grouped on same line by separating them with comma
#
#   When element name stars with . then menu system will add parent
#   container config name as prefix to element name (delimited by space)

#[menu infodeck]
#type: deck
#name:
#cursor:
#width:
#scroll:
#enable:
#enter_gcode
#leave_gcode
#longpress_menu:
#   Entry point to menu container. When this attribute is set then
#   long press > 0.8s will initiate this menu container if not in edit mode.
#   The default is disabled. This parameter is optional.
#items:
#   It accepts only 'card' elements. You are able to switch between different card screens
#   by using encoder or up/down buttons.
#content:
#   It allows quickly define single card decks by adding content directly to deck.
#   You have to remove deck item attribute and use named items in content.
#   The menu functionality will then internally create one card item for this deck.
#   This is optional.

#[menu card1]
#type: card
#name:
#content:
#   Card screen content. Each line represents display line.
#   Quotes can be used in the beginning and end of line.
#   Rendered elements are available for output formatting as {0}..{x}. It's always string type.
#   It's possible directly use menu item names in content by leaving items attribute out or empty
#   and use menu items names directly in content as {msg,xpos|ypos}. The menu functionality will then
#   internally build a item list and replace names with indexes in content.
#   This is optional.
#items:
#   List of elements in card. Each line represents a single index for content formatting.
#   It's possible to show multiple elements in one place by separating them with comma on single line.
#   If first element is integer then timed cycle is used (integer value is cycle time in seconds)
#   If no integer element then first enabled element is shown.
#   In cycler multiple elements can be grouped into one postition by separating them with |
#   This way only simple menu items can be grouped.
#   Example: 5,prt_time, prt_progress - elements prt_time and prt_progress are switched after 5s
#   Example: msg,xpos|ypos - elements xpos and ypos are grouped and showed together when msg is disabled.
#use_cursor:
#   This attribute accepts static boolean value.
#   When enabled the menu system uses a cursor instead of blinking to visualize item selection
#   and edit mode for this card. Cursor and placeholder is always added as item name prefix.
#   The default is False. This parameter is optional.