SONOFF USB ZIGBEE DONGLE PLUS on SYNOLOGY DOCKER

[angeck]

Hello,

I have a problem with this coordinator. I have Zigbee on a docker macvlan (Jeedom) but my new key is not online (before it's a CC2351) :

lsusb
|__usb1          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub
  |__1-2         10c4:ea60:0100 00  2.00   12MBit/s 100mA 1IF  (ITead Sonoff Zigbee 3.0 USB Dongle Plus 5ebff58cb719ec11b20d76e5f01c6278)
  |__1-4         f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 7F00126F381A2E78)
|__usb2          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:00:15.0) hub

but

dmesg |grep tty
[    0.000000] Command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS220+ vender_format_version=2 synoboot2 sn=2140RLRJH4BRV macs=003332eb82d9,001132eb82da syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    0.000000] Kernel command line: root=/dev/md0 intel_iommu=igfx_off netif_num=2 HddEnableDynamicPower=1 syno_hw_version=DS220+ vender_format_version=2 synoboot2 sn=2140RLRJH4BRV macs=003332eb82d9,001132eb82da syno_ttyS0=pciserial,0x0:0x18.0x2,115200 syno_ttyS1=pciserial,0x0:0x18.0x0,115200
[    4.506485] dw-apb-uart.1: ttyS1 at MMIO 0xa1215000 (irq = 54, base_baud = 115200) is a 16550A
[    4.522931] console [ttyS0] disabled
[    4.526772] dw-apb-uart.2: ttyS0 at MMIO 0xa1217000 (irq = 6, base_baud = 115200) is a 16550A
[    4.536458] console [ttyS0] enabled
[   27.752529] synobios open /dev/ttyS1 success
[   52.540966] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   52.554092] systemd[1]: Starting system-serial\x2dgetty.slice.
[   55.487849] synobios open /dev/ttyS1 success

I have read the tuto from : https://www.geeek.org/synology-dsm-7-probleme-usb/ but the same, the docker don't see my key.

Thanks for your help and sorry for my English

[tuanha2000vn]

I have the same issue.

[7uAip6]

Same here. It seems I wasted my $ on this.

[sibalzer]

I found a solution. The problem is that the SONOFF Zigbee 3.0 USB Dongle Plus uses a different usb-to-serial chip, which driver is not present in DSM7. So you have to manualy install the kernel modul.

1. Get the cp210x.ko modul. E.g. precompiled from here (you can find your platform here)
2. Copy the cp210x.ko file to /lib/modules/
3. Add insmod /lib/modules/cp210x.ko to the boot script like here
4. Edit the docker-compose.yaml and change /dev/ttyACM0:/dev/ttyACM0 to /dev/ttyUSB0:/dev/ttyUSB0
5. Change the serial port to /dev/ttyUSB0 in the configuration.yaml

[lukasadc]

Where can I find docker-compose and configuration.yaml ?

[Jasonb11]

I just got this setup with Portainer on my synology. In portainer if you edit/duplicate the container you can scroll down to advanced container settings and then runtime and resources. Add device and choose the /dev/TTYUSB0 from the host and point it to the destination container using the same path /dev/TTYUSB0.

[Arelav]

I just want to say thank you. The driver disappeared after DSM update and as the previous time when I bough Synology it works like a charm.

[ltoinel]

@angeck : I update my blog post on Geeek.org, the drivers path changed on the GitHub repository since the DSM 7.1 update !

[mariusrga]

Hi,

I have similar problem as well, a synology DS 216+ (braswell architecture) and, I used the drivers from here https://github.com/robertklep/dsm7-usb-serial-drivers/tree/main/modules/braswell/dsm-7.1 . Problem is that, when trying to use the insmod command, I get "insmod: ERROR: could not insert module /lib/modules/cp210x.ko: Invalid module format"

What am I doing wrong?

[cgarciaq]

I was getting this error message when I tried with a cp210x.ko compiled for another architecture. But I see DS216x is braswell... could it be that your disktation is another version of DS216?

[mariusrga]

Thanks for the reply. I was using wget to download directly the files, but seems that github.com was having another sublink underneath the files names, so once I got the correct files, all went as it should.

[RunnicFusion]

Hi! do you guys see the dongle when entering lsusb inside the teminal? After flashing the device isn't listed as sonoff any longer. Right now i get some hex like fffffdffff as name. And the device isn't recognized any longer. Do I need different drivers on my Synology than cp210x?

[madcowGit]

In case someone is still looking for this. Follow this guide:
https://github.com/robertklep/dsm7-usb-serial-drivers