1.38.0

[Koenkk]

Feel free to discuss the v1.38.0 release here!

[altopais]

Moes 2 gang smart dimmer stopped dimming on one gang. L1 is not dimming, L2 is dimming.
It's reported as TS0601_dimmer_2.
In z2m logs i get only info when changing brightness on L1, no errors or warnings.

[dz1984sg]

Since the update, my device list is empty, but all devices are still connected and working!

[dz1984sg]

already tried everything ,,,, as already written, all devices already paired work

[dz1984sg]

error was in the configuration.yaml .... whatever was wrong with it .... deleted all the devices there and now I see everything again .... just reassign the names and that's it

[LaurentChardin]

It usually happens when you switch to ember the first time, and it actually re-creates its state from the backup : for some minutes, the information is empty. But once the devices are backup, the page will be updated with the proper informations.

[dz1984sg]

there was no change .... that's why i share the information about the error .... because it makes no sense and there was no reason .....

no new gears were learned. after the update everything ran for 2 hours ca..... only then was the list empty! ..

[LaurentChardin]

All of those information are read from the MQTT bridge/info topic which are sent to react through websocket.
So for some reasons, you didnt get the message. Restarting z2m in the background will resent the bridge/info message to the frontend (as this is publish at startup, and when device changes).
You should still see the message in MQTT anyway as this is a retained message : if this is not even there, then yes, there is something wrong. If it is there ,but you dont see it in the frontend : probably something happened during the sync/start of react app.

[Dydas]

After the update Zigbee2MQTT cannot start. Errors in the logs: "Error relocating /bin/bash"

[mmirannalti]

I have a few Bosch BMCT-SLZ.
As from notes, I have reconfigured them.
It worked in z2m, but in HA the device don't reflect the attributes exposed in z2m.
Is there a way to force the publish of the device structure to HA?

Thanks

[Fullmojjo]

Müller Licht Tint remote 404049D is stopped since update sonoff ember driver. Any update ?