All motion detection from any Third Reality device doesn't update expose after update to v1.37.1-1

[ZetaWaves]

What happened?

After update to v1.37.1-1, no Third Reality device is updating motion detection expose.

What did you expect to happen?

Motion detection normally works.

How to reproduce it (minimal and precise)

Update to v1.37.1-1 (doesn't work)
Revert to previous release (works again)

Zigbee2MQTT version

v1.37.1-1

Adapter firmware version

latest

Adapter

Sonoff P 3.0

Setup

Home Assistant Add-on

Debug log

No response

[dieneuser]

I have the same problem with a DIY device. All properties work - only occupancy remains on motion in inactive (or null) state.
In version 1.37.0 the sensor still works without errors.
I think there is a mistake in this change: (Koenkk/zigbee-herdsman-converters#7441)

1.37.0:

1.37.1 and dev branch:

[kris-anderson]

Can confirm this issue on all my Third Reality Multi-Function Nightlights (3RSNL02043Z).

Lux and light controls work, but motion sensing no longer works.

Reverting to 1.37.0 gets motion sensing reporting again.

[fxfitz]

I'm observing the same!

[pauldcomanici]

I'm noticing something similar with Aqara P1 motion. In my case, the issue is caused by the fact that the illuminance_lux entity is updated after the motion entity resulting in my automation to not work properly.
When I check MQTT Explorer I get:

{"battery":100,"detection_interval":20,"device_temperature":26,"illuminance":5,"linkquality":178,"motion_sensitivity":"high","occupancy":true,"power_outage_count":0,"trigger_indicator":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":3019}

in the z2m logs panel I see:

info 2024-05-12 08:24:26MQTT publish: topic 'zigbee2mqtt/0.BJ motion', payload '{"battery":100,"detection_interval":20,"device_temperature":26,"illuminance":5,"linkquality":178,"motion_sensitivity":"high","occupancy":true,"power_outage_count":0,"trigger_indicator":false,"update":{"installed_version":-1,"latest_version":-1,"state":null},"update_available":null,"voltage":3019}'

In both cases I have good values, however when my automation runs I notice that motion entity triggers from 'off' to 'on' and the illuminance_lux entity has the old value (not the one as we see from the above logs. I did a fix where I have a new trigger based on illuminance_lux entity with a delay of 1sec to catch this use-case; however will be nice if the entities are updated accordingly.

I'm not 100% sure, but I think this issue started with version 1.36.1

[barosan909]

Same here. Also the door sensor stopped working at the same time

[nholben]

Same here for my devices. No motion reporting on 1.37.1, everything else appears to work.

[Koenkk]

Regarding the third reality devices, could you provide the debug log when motion should be detected?

See this on how to enable debug logging.

[fxfitz]

[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/binary_sensor/0xb40ecfd3a00c0000/occupancy/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"device_class":"motion","object_id":"delaney's_hallway_-_nightlight_occupancy","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"payload_off":false,"payload_on":true,"state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_occupancy_zigbee2mqtt","value_template":"{{ value_json.occupancy }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/sensor/0xb40ecfd3a00c0000/illuminance/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":false,"name":"Illuminance","object_id":"delaney's_hallway_-_nightlight_illuminance","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_illuminance_zigbee2mqtt","value_template":"{{ value_json.illuminance }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/sensor/0xb40ecfd3a00c0000/illuminance_lux/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"device_class":"illuminance","enabled_by_default":true,"object_id":"delaney's_hallway_-_nightlight_illuminance_lux","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_illuminance_lux_zigbee2mqtt","unit_of_measurement":"lx","value_template":"{{ value_json.illuminance_lux }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/light/0xb40ecfd3a00c0000/light/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"brightness":true,"brightness_scale":254,"command_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight/set","device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"effect":true,"effect_list":["blink","breathe","okay","channel_change","finish_effect","stop_effect","colorloop","stop_colorloop"],"name":null,"object_id":"delaney's_hallway_-_nightlight","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"schema":"json","state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","supported_color_modes":["xy"],"unique_id":"0xb40ecfd3a00c0000_light_zigbee2mqtt"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/select/0xb40ecfd3a00c0000/effect/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"command_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight/set/effect","device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":false,"icon":"mdi:palette","name":"Effect","object_id":"delaney's_hallway_-_nightlight_effect","options":["blink","breathe","okay","channel_change","finish_effect","stop_effect","colorloop","stop_colorloop"],"origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"unique_id":"0xb40ecfd3a00c0000_effect_zigbee2mqtt"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/sensor/0xb40ecfd3a00c0000/power_on_behavior/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:power-settings","name":"Power-on behavior","object_id":"delaney's_hallway_-_nightlight_power_on_behavior","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_power_on_behavior_zigbee2mqtt","value_template":"{{ value_json.power_on_behavior }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/select/0xb40ecfd3a00c0000/power_on_behavior/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"command_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight/set/power_on_behavior","device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":true,"entity_category":"config","icon":"mdi:power-settings","name":"Power-on behavior","object_id":"delaney's_hallway_-_nightlight_power_on_behavior","options":["off","on","toggle","previous"],"origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_power_on_behavior_zigbee2mqtt","value_template":"{{ value_json.power_on_behavior }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/sensor/0xb40ecfd3a00c0000/linkquality/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:signal","name":"Linkquality","object_id":"delaney's_hallway_-_nightlight_linkquality","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_class":"measurement","state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_linkquality_zigbee2mqtt","unit_of_measurement":"lqi","value_template":"{{ value_json.linkquality }}"}'
[2024-05-14 14:49:04] debug: 	z2m: Received MQTT message on 'homeassistant/sensor/0xb40ecfd3a00c0000/update_state/config' with data '{"availability":[{"topic":"zigbee2mqtt/bridge/state","value_template":"{{ value_json.state }}"}],"device":{"identifiers":["zigbee2mqtt_0xb40ecfd3a00c0000"],"manufacturer":"Third Reality","model":"Zigbee multi-function night light (3RSNL02043Z)","name":"Delaney's Hallway - Nightlight","sw_version":"v0.00.72","via_device":"zigbee2mqtt_bridge_0xf082c0fffe4348c4"},"enabled_by_default":false,"entity_category":"diagnostic","icon":"mdi:update","name":"Update state","object_id":"delaney's_hallway_-_nightlight_update_state","origin":{"name":"Zigbee2MQTT","sw":"1.37.1","url":"https://www.zigbee2mqtt.io"},"state_topic":"zigbee2mqtt/Delaney's Hallway - Nightlight","unique_id":"0xb40ecfd3a00c0000_update_state_zigbee2mqtt","value_template":"{{ value_json['update']['state'] }}"}'

I think this is what you need. Let me know if you need something else, or a more specific log line.

[Koenkk]

This is something different, can you:

• Start z2m and wait 60 seconds
• Trigger occupancy, you should see Received Zigbee message (if not that's a problem)
• Provide that log here

[fxfitz]

Got it. So I think this is actually what you need :-P

[2024-05-15 15:57:50] debug: 	z2m: Received Zigbee message from 'Master Bedroom - Nightlight', type 'attributeReport', cluster 'manuSpecificAssaDoorLock', data '{"2":1}' from endpoint 1 with groupID 0
[2024-05-15 15:57:50] debug: 	z2m: No converter available for '3RSNL02043Z' with cluster 'manuSpecificAssaDoorLock' and type 'attributeReport' and data '{"2":1}'
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- [220bb1a90d2a782b5994e881799a9cfd008d2784fa7e]
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- DATA (2,2,0): 220bb1a90d2a782b5994e881799a9cfd008d2784fa7e
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: --> ACK  (3)
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: --> [83401b7e]
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- ACK (2): 220bb1a90d2a782b5994e881799a9cfd008d2784fa7e
[2024-05-15 15:57:51] debug: 	zh:ezsp:ezsp: <== Frame: 49900159006d990000a2a4d3cf0eb49cc300
[2024-05-15 15:57:51] debug: 	zh:ezsp:ezsp: <== 0x59: {"_cls_":"incomingRouteRecordHandler","_id_":89,"_isRequest_":false,"source":39277,"longId":{"type":"Buffer","data":[180,14,207,211,164,162,0,0]},"lastHopLqi":156,"lastHopRssi":-61,"relay":{"type":"Buffer","data":[]}}
[2024-05-15 15:57:51] debug: 	zh:ezsp:driv: handleRouteRecord: nwk=39277, ieee=��Ӥ�

, lqi=156, rssi=-61, relays=
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- [320bb1a97d312a15b658944e24ab1593499cd9bb6880579874f5dec883fc7d5e1e6bd1cf85b57e]
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- DATA (3,2,0): 320bb1a9112a15b658944e24ab1593499cd9bb6880579874f5dec883fc7e1e6bd1cf85b57e
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: --> ACK  (4)
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: --> [8430fc7e]
[2024-05-15 15:57:51] debug: 	zh:ezsp:uart: <-- ACK (2): 320bb1a9112a15b658944e24ab1593499cd9bb6880579874f5dec883fc7e1e6bd1cf85b57e
[2024-05-15 15:57:51] debug: 	zh:ezsp:ezsp: <== Frame: 49900145000004010004010140010000979cc36d99ffff0818ab0a000021cc3a02
[2024-05-15 15:57:51] debug: 	zh:ezsp:ezsp: <== 0x45: {"_cls_":"incomingMessageHandler","_id_":69,"_isRequest_":false,"type":0,"apsFrame":{"profileId":260,"sequence":151,"clusterId":1024,"sourceEndpoint":1,"destinationEndpoint":1,"groupId":0,"options":320},"lastHopLqi":156,"lastHopRssi":-61,"sender":39277,"bindingIndex":255,"addressIndex":255,"message":{"type":"Buffer","data":[24,171,10,0,0,33,204,58]}}
[2024-05-15 15:57:51] debug: 	zh:ezsp: processMessage: {"messageType":0,"apsFrame":{"profileId":260,"sequence":151,"clusterId":1024,"sourceEndpoint":1,"destinationEndpoint":1,"groupId":0,"options":320},"lqi":156,"rssi":-61,"sender":39277,"bindingIndex":255,"addressIndex":255,"message":{"type":"Buffer","data":[24,171,10,0,0,33,204,58]}}
[2024-05-15 15:57:51] debug: 	zh:controller: Received payload: clusterID=1024, address=39277, groupID=0, endpoint=1, destinationEndpoint=1, wasBroadcast=false, linkQuality=156, frame={"header":{"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0},"manufacturerCode":null,"transactionSequenceNumber":171,"commandIdentifier":10},"payload":[{"attrId":0,"dataType":33,"attrData":15052}],"command":{"ID":10,"name":"report","parameters":[{"name":"attrId","type":33},{"name":"dataType","type":32},{"name":"attrData","type":1000}]}}

Guessing No converter available for '3RSNL02043Z' with cluster 'manuSpecificAssaDoorLock' and type 'attributeReport' and data '{"2":1}' is the problem child.

[Koenkk]

I think this has already been fixed in Koenkk/zigbee-herdsman-converters#7521, can you check with the latest dev branch?

[digitalcardboard]

+1 on this for a Third Reality 3RSNL02043Z. I thought I had misconfigured it. Trying to sort out how to switch to edge to test.

[digitalcardboard]

I think this has already been fixed in Koenkk/zigbee-herdsman-converters#7521, can you check with the latest dev branch?

Dev branch works, at least for my Third Reality 3RSNL02043Z.