Tuya TS0013 turns itself off again after 2 minutes

[riyas1980]

If I connect the wired TS0013 Tuya switch (no-neutral) as described and paired it with Zigbee2Mqtt, it turns off again after 2 minutes. But if I remove it from Zigbee2MQTT, it is working fine. So there is nothing wrong with the cable connection.

It looks like a known issue with deCONZ but for many Zigbee2MQTT users, it's working fine. It seems like a timer activated but I don't know where I can find this information.

How to reproduce it (minimal and precise)

Debug info

Zigbee2MQTT version: 1.17.1
Adapter hardware: Conbee II

[mikesrus]

same problem.
i found posible solution

to make it work with ZHA and have it not to turn off after 2 minutes, you need to pair it fisrt; then keep the button pressed until the light blinks green; wait until it stops blinking WITHOUT DOING NOTHING and it will not turn off auomatically. seller should warn this, either way, it works great but it does not work as a zigbee router 28 Dec 2020 13:35
https://www.aliexpress.com/item/4000298926256.html?spm=a2g0s.12269583.0.0.7750c7d5qdAQWE

i pair device and after sucess pairing press first button and hold until green light blink. afrer it device working without reboots.

I cannot understand the algorithm completely, but it worked.

[riyas1980]

@mikesrus Thank you very much. Followed your method. It's working fine. Thanks a lot. As you said, it's not working as zigbee router. But I am really happy with the outcome. :-)

[mikesrus]

Cool!
as I understand, version without the zero line is not a router. and does not show the power source.

Probably we need to collect more statistics about this method, and add it to the device description in the list of supported

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days

[ilbarone87]

Hello guys, I'm facing the same problem, i'm on slaesh dongle.
If i try with your method, pairing and then press again first gang, the switch keeps on reparing and the lights keeps on turn it off every 2 mins.
Have you found any other solution to this?
thanks.

[rgolab]

I had the same problem. Solution posted by @mikesrus works fine for me.

[HA-Jon]

TS0013
by _TZ3000_wyhuocal
Lonsonho
Still having the RESET after 2 minutes.
I'm using Conbee 2 on Home Assistant.
How can I fix?

[md-ray]

same, I'm using Lonsonho and Conbee 2 adapter. I did try to do solution by @mikesrus , but no luck :( still having RESET after 2 minutes.