meson64_odroidc2.dts

/*
 * AMLogic's S905 based ODROID-C2 board device tree source
 *
 * Copyright (c) 2015 Hardkernel Co., Ltd.
 *                    http://www.hardkernel.com
 *
 * Device tree source file for Hardkernel's ODROID-C2 board based on AMLogic's
 * S905 SoC.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/gxbb.h>
#include <dt-bindings/gpio/gxbb.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/reset/aml_gxbb.h>
#include "amlogic/mesongxbb.dtsi"
/ {
	le-dt-id = "meson64_odroidc2";
	model = "ODROID-C2";
	amlogic-dt-id = "odroidc2_2g";
	compatible = "amlogic, Gxbb";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		serial0 = &uart_AO;
		serial1 = &uart_A;
	};

	gpu_dvfs_tbl:gpu_dvfs_tbl {
		sc_mpp = <3>;/* number of pp used most of time.*/
		tbl = <&clk285_cfg &clk400_cfg &clk500_cfg &clk666_cfg &clk800_cfg>;
	};

	memory@00000000 {
		device_type = "memory";
		linux,usable-memory = <0x0 0x1000000 0x0 0x7f000000>;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		/* global autoconfigured region for contiguous allocations */
		secmon_reserved:linux,secmon {
			compatible = "amlogic, aml_secmon_memory";
			reg = <0x0 0x10000000 0x0 0x200000>;
			no-map;
		};
		secos_reserved:linux,secos {
			status = "disable";
			compatible = "amlogic, aml_secos_memory";
			reg = <0x0 0x05300000 0x0 0x2000000>;
			no-map;
		};
		pstore:aml_pstore {
			compatible = "amlogic, pstore";
			reg = <0x0 0x07300000 0x0 0x100000>;
			no-map;
		};
		fb_reserved:linux,meson-fb {
			compatible = "amlogic, fb-memory";
			size = <0x0 0x1900000>;
			no-map;
		};

		di_reserved:linux,di {
			compatible = "amlogic, di-mem";
			size = <0x0 0x1e00000>; //10x1920x1088x3/2=30M
			//no-map;
			multi-use;
		};

		ion_reserved:linux,ion-dev {
			compatible = "amlogic, idev-mem";
			size = <0x0 0x2000000>;
			multi-use;
		};

		/*  POST PROCESS MANAGER */
		ppmgr_reserved:linux,ppmgr {
			compatible = "amlogic, ppmgr_memory";
			size = <0x0 0x0>;
			multi-use;
		};

		codec_mm_cma:linux,codec_mm_cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x0 0xc000000>;
			alignment = <0x0 0x400000>;
			linux,contiguous-region;
		};
		picdec_cma_reserved:linux,picdec {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x0 0x0>;
			status = "disabled";
			alignment = <0x0 0x400000>;
			linux,contiguous-region;
		};
		/* codec shared reserved */
		codec_mm_reserved:linux,codec_mm_reserved {
			compatible = "amlogic, codec-mm-reserved";
			size = <0x0 0x4100000>;
			alignment = <0x0 0x100000>;
 			//no-map;
		};
	};

	meson-vout {
		compatible = "amlogic, meson-vout";
		dev_name = "meson-vout";
		status = "okay";
	};
	meson-fb {
		compatible = "amlogic, meson-fb";
		memory-region = <&fb_reserved>;
		dev_name = "meson-fb";
		status = "okay";
		interrupts = <0 3 1
			0 89 1>;
		interrupt-names = "viu-vsync", "rdma";
		mem_size = <0x01800000 0x00100000>; /* fb0/fb1 memory size */
		display_mode_default = "1080p60hz";
		scale_mode = <1>; /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
		display_size_default = <1920 1080 1920 2160 32>; //1920*1080*4*3 = 0x17BB000
	};
	ge2d {
		compatible = "amlogic, ge2d";
		dev_name = "ge2d";
		status = "okay";
		interrupts = <0 150 1>;
		interrupt-names = "ge2d";
		clocks = <&clock CLK_VAPB_0>,
			<&clock CLK_GE2D>;
		clock-names = "clk_vapb_0",
				"clk_ge2d";
		resets = <&clock GCLK_IDX_GE2D>;
		reset-names = "ge2d";
	};
	codec_io {
		compatible = "amlogic, codec_io";
		#address-cells=<2>;
		#size-cells=<2>;
		ranges;
		io_cbus_base{
			reg = <0x0 0xC1100000 0x0 0x100000>;
		};
		io_dos_base{
			reg = <0x0 0xc8820000 0x0 0x10000>;
		};
		io_hiubus_base{
			reg = <0x0 0xc883c000 0x0 0x2000>;
		};
		io_aobus_base{
			reg = <0x0 0xc8100000 0x0 0x100000>;
		};
		io_vcbus_base{
			reg = <0x0 0xd0100000 0x0 0x40000>;
		};
		io_dmc_base{
			reg = <0x0 0xc8838000 0x0 0x400>;
		};
	};
	codec_mm {
			compatible = "amlogic, codec, mm";
			memory-region = <&codec_mm_cma &codec_mm_reserved>;
			dev_name = "codec_mm";
			status = "okay";
	};
	ethmac: ethernet@0xc9410000{
                compatible = "amlogic, gxbb-rgmii-dwmac";
                reg = <0x0 0xc9410000 0x0 0x10000
                0x0 0xc8834540 0x0 0x8>;
                interrupts = <0 8 1>;
                phy-mode= "rgmii";
                pinctrl-names = "eth_pins";
                pinctrl-0 = <&eth_pins>;
                rst_pin-gpios = <&gpio GPIOZ_14 0>;
                mc_val = <0x1621>;
                resets = <&clock GCLK_IDX_ETHERNET>;
                reset-names = "ethpower";
                interrupt-names = "macirq";
                clocks = <&clock CLK_81>;
                clock-names = "ethclk81";
        };

	pwm {
		compatible = "amlogic, odroid-pwm";
		dev_name = "meson_pwm";
		status = "okay";
		pinctrl-names = "odroid_pwm0","odroid_pwm1";
		pinctrl-0 = <&odroid_pwm0>;
		pinctrl-1 = <&odroid_pwm1>;
	};

	pwm-ctrl {
		compatible = "amlogic, pwm-ctrl";
		dev_name = "pwm-ctrl";
		status = "okay";
	};

	mesonstream {
		compatible = "amlogic, codec, streambuf";
		dev_name = "mesonstream";
		status = "okay";
		resets = <&clock GCLK_IDX_HIU_PARSER_TOP
			&clock GCLK_IDX_VPU_INTR
			&clock GCLK_IDX_DEMUX
			&clock GCLK_IDX_DOS>;
		reset-names = "parser_top",
			"vpu_intr",
			"demux",
			"vdec";
	};

	amvideocap {
		compatible = "amlogic, amvideocap";
		dev_name = "amvideocap.0";
		status = "okay";
		max_size = <8>;//8M
	};

	ion_dev {
		compatible = "amlogic, ion_dev";
		memory-region = <&ion_reserved>;
	};

	vdec {
		compatible = "amlogic, vdec";
		dev_name = "vdec.0";
		status = "okay";
		interrupts = <0 3 1
			0 23 1
			0 32 1
			0 43 1
			0 44 1
			0 45 1>;
		interrupt-names = "vsync",
			"demux",
			"parser",
			"mailbox_0",
			"mailbox_1",
			"mailbox_2";
	};
	picdec {
		   compatible = "amlogic, picdec";
		   memory-region = <&picdec_cma_reserved>;
		   dev_name = "picdec";
		   status = "okay";
	};
	ppmgr {
		compatible = "amlogic, ppmgr";//to match of_device_id's compatible member
		memory-region = <&ppmgr_reserved>;
		dev_name = "ppmgr";
		status = "okay";
	};
	deinterlace {
		compatible = "amlogic, deinterlace";
		status = "okay";
		memory-region = <&di_reserved>;
		interrupts = <0 46 1
				0 6 1>;
		interrupt-names = "de_irq",
				"timerc";
		buffer-size = <3133440>;	//1920x1088x3/2
		hw-version = <2>;
	};

	amvdec_656in0 {
		compatible = "amlogic, amvdec_656in";
		dev_name = "amvdec_656in0";
		status = "ok";
		reg = <0x0 0xd0048000 0x0 0x7c>;
		clocks = <&clock CLK_FPLL_DIV2>,
			<&clock CLK_BT656_CLK0>;
		clock-names = "fclk_div2", "cts_bt656_clk0";
		bt656_id = <0>;
	};
	amvdec_656in1 {
		compatible = "amlogic, amvdec_656in";
		dev_name = "amvdec_656in1";
		status = "ok";
		reg = <0x0 0xd0050000 0x0 0x7c>;
		clocks = <&clock CLK_FPLL_DIV2>,
			<&clock CLK_BT656_CLK1>;
		clock-names = "fclk_div2", "cts_bt656_clk1";
		bt656_id = <1>;
	};

	amvenc_avc{
		compatible = "amlogic, amvenc_avc";
		//memory-region = <&amvenc_avc_reserved>;
		dev_name = "amvenc_avc";
		status = "okay";
		interrupts = <0 45 1>;
		interrupt-names = "mailbox_2";
	};

	vpu {
		compatible = "amlogic, vpu";
		dev_name = "vpu";
		status = "ok";
		clk_level = <7>;
		/**	0: 100.0M    1: 166.7M    2: 200.0M
			3: 250.0M    4: 333.3M    5: 400.0M
			6: 500.0M    7: 666.7M */
	};

    sd{
        compatible = "amlogic, aml_sd_emmc";
        dev_name = "aml_newsd.0";
        status = "okay";
        reg = <0x0 0xd0072000 0x0 0x2000>;
        interrupts = <	0 217 1
        				0 67 1
        				0 69 1>;
        pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins", "sd_1bit_pins","sd_clk_cmd_uart_pins","sd_1bit_uart_pins", "sd_to_ao_uart_pins", "ao_to_sd_uart_pins","ao_to_sd_jtag_pins","sd_to_ao_jtag_pins";
        pinctrl-0 = <&sd_clk_cmd_pins>;
        pinctrl-1 = <&sd_all_pins>;
        pinctrl-2 = <&sd_1bit_pins>;
        pinctrl-3 = <&sd_clk_cmd_uart_pins>;
        pinctrl-4 = <&sd_1bit_uart_pins>;
        pinctrl-5 = <&sd_to_ao_uart_pins>;
        pinctrl-6 = <&ao_to_sd_uart_pins>;
        pinctrl-7 = <&ao_to_sd_jtag_pins>;
        pinctrl-8 = <&sd_to_ao_jtag_pins>;

		sd{
	   		status = "okay";
	   		pinname = "sd";
	   		ocr_avail = <0x00200080>; // 3.3:0x200000, 1.8+3.3:0x00200080
	   		caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED",
					"MMC_CAP_SD_HIGHSPEED";
					//"MMC_CAP_UHS_SDR12",
					//"MMC_CAP_UHS_SDR25","MMC_CAP_UHS_SDR50",
					//"MMC_CAP_UHS_SDR104";
	   		f_min = <400000>;
	   		f_max = <100000000>;
	   		max_req_size = <0x20000>;          /**128KB*/
			gpio_dat3 = <&gpio       CARD_4       GPIO_ACTIVE_HIGH>;
			jtag_pin =  <&gpio       CARD_0       GPIO_ACTIVE_HIGH>;
			gpio_cd =  <&gpio       CARD_6       GPIO_ACTIVE_HIGH>;
			/*if card have no switch gpio, remove all relative to vol_switch */
			vol_switch =  <&gpio_ao       GPIOAO_3       GPIO_ACTIVE_LOW>;
			vol_switch_18 = <1>; /* 1 = high, 0 = low */
			vol_switch_delay = <150>; /* Uint: ms*/
	   		irq_in = <3>;
	   		irq_out = <5>;
	   		card_type = <5>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
		};
    };
    emmc{
        compatible = "amlogic, aml_sd_emmc";
        dev_name = "aml_newsd.0";
        status = "okay";
        reg = <0x0 0xd0074000 0x0 0x2000>;
        interrupts = <	0 218 1>;
        pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
        pinctrl-0 = <&emmc_clk_cmd_pins>;
        pinctrl-1 = <&emmc_all_pins>;
        emmc{
            status = "okay";
            pinname = "emmc";
            ocr_avail = <0x200080>;          /**VDD voltage 3.3 ~ 3.4 */
            caps = "MMC_CAP_8_BIT_DATA","MMC_CAP_MMC_HIGHSPEED",
			"MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE","MMC_CAP_1_8V_DDR",
			"MMC_CAP_HW_RESET", "MMC_CAP_ERASE", "MMC_CAP_CMD23";
                        caps2 = "MMC_CAP2_HS200_1_8V_SDR",
                              "MMC_CAP2_HS400_1_8V",
                              "MMC_CAP2_BROKEN_VOLTAGE",
                              "MMC_CAP2_BOOTPART_NOACC";
                        f_min = <400000>;
                        f_max = <100000000>;
			tx_phase = <0>;
            max_req_size = <0x20000>;          /**256KB*/
//            gpio_dat3 = "BOOT_3"
		gpio_dat3 = <&gpio       BOOT_3      GPIO_ACTIVE_HIGH>;
		hw_reset =  <&gpio       BOOT_9      GPIO_ACTIVE_HIGH>;
            card_type = <1>; /* 1:mmc card(include eMMC), 2:sd card(include tSD), */
		};
    };

	amhdmitx: amhdmitx{
		compatible = "amlogic, amhdmitx";
		dev_name = "amhdmitx";
		status = "okay";
		pinctrl-names="hdmitx_hpd", "hdmitx_ddc";
		pinctrl-0=<&hdmitx_hpd>;
		pinctrl-1=<&hdmitx_ddc>;
		/* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
		interrupts = <0 57 1>;
		interrupt-names = "hdmitx_hpd";
		clocks = <&clock CLK_HDMITX_SYS &clock CLK_HDMITX_ENCP
			&clock CLK_HDMITX_ENCI &clock CLK_HDMITX_PIXEL
			&clock CLK_HDMITX_PHY &clock CLK_VID>;
		clock-names = "hdmitx_clk_sys", "hdmitx_clk_encp", "hdmitx_clk_enci",
			"hdmitx_clk_pixel", "hdmitx_clk_phy", "hdmitx_clk_vid";
		ranges;
		#address-cells = <2>;
		#size-cells = <2>;
	};
	aocec: aocec{
		compatible = "amlogic, amlogic-aocec";
		status = "okay";
		vendor_name = "Hardkernel"; /* Max Chars: 8     */
		vendor_id = <0x000000>; /* Refer to http://standards.ieee.org/develop/regauth/oui/oui.txt   */
		product_desc = "ODROID-C2"; /* Max Chars: 16    */
		cec_osd_string = "ODROID-C2"; /* Max Chars: 14    */
		port_num = <1>;
		arc_port_mask = <0x0>;
		interrupts = <0 199 1>;
		interrupt-names = "hdmi_aocec";
		pinctrl-names = "hdmitx_aocec";
		pinctrl-0=<&hdmitx_aocec>;
		reg = <0x0 0xc810023c 0x0 0x4
		       0x0 0xc8100000 0x0 0x200>;
	};

	tvout {
		compatible = "amlogic, tvout";
		dev_name = "tvout";
		status = "okay";
	};

	uart_AO: serial@c81004c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc81004c0 0x0 0x14>;
		interrupts = <0 193 1>;
		status = "okay";
		clocks = <&clock CLK_XTAL>;
		clock-names = "clk_uart";
		fifosize = < 64 >;
		pinctrl-names = "default";
		//pinctrl-0 = <&ao_uart_pins>;
		support-sysrq = <0>;	/* 0 not support , 1 support */
	};
	uart_A: serial@c11084c0 {
		compatible = "amlogic, meson-uart";
		reg = <0x0 0xc11084c0 0x0 0x14>;
		interrupts = <0 26 1>;
		status = "okay";
		clocks = <&clock CLK_XTAL>;
		clock-names = "clk_uart";
		fifosize = < 128 >;
		pinctrl-names = "default";
		pinctrl-0 = <&a_uart_pins>;
		resets = <&clock GCLK_IDX_UART0>;
	};


	canvas{
		compatible = "amlogic, meson, canvas";
		dev_name = "amlogic-canvas";
		status = "ok";
		reg = <0x0 0xc8838000 0x0 0x400>;
	};

	rdma{
		compatible = "amlogic, meson, rdma";
		dev_name = "amlogic-rdma";
		status = "ok";
		interrupts = <0 89 1>;
		interrupt-names = "rdma";
	};

	dwc2_b {
		compatible = "amlogic,dwc2";
		device_name = "dwc2_b";
		reg = <0x0 0xc9100000 0x0 0x40000>;
		interrupts = <0 31 4>;
		status = "okay";
		pl-periph-id = <1>; /** lm name */
		clock-src = "usb1"; /** clock src */
		port-id = <1>;   /** ref to mach/usb.h */
		port-type = <1>;	/** 0: otg, 1: host, 2: slave */
		port-speed = <0>; /** 0: default, 1: high, 2: full */
		port-config = <0>; /** 0: default */
		port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/
		port-id-mode = <1>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
		gpio-hub-rst = "GPIOAO_4";
		gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
		phy-reg = <0xc0000020>;
		phy-reg-size = <0x20>;
		usb-fifo = <1024>;
		host-only-core = <1>;
		pmu-apply-power = <1>;
		cpu-type = "gxbaby";
		resets = <&clock GCLK_IDX_USB_GENERAL
					&clock GCLK_IDX_MISC_USB1_TO_DDR
					&clock GCLK_IDX_USB1>;
		reset-names = "usb_general",
						"usb1",
						"usb1_to_ddr";
	};

	odroid_sysfs {
		compatible = "odroid-sysfs";
	};

	dwc2_a {
		compatible = "amlogic,dwc2";
		device_name = "dwc2_a";
		reg = <0x0 0xc9000000 0x0 0x40000>;
		interrupts = <0 30 4>;
		status = "okay";
		pl-periph-id = <0>; /** lm name */
		clock-src = "usb0"; /** clock src */
		port-id = <0>;  /** ref to mach/usb.h */
		port-type = <0>;	/** 0: otg, 1: host, 2: slave */
		port-speed = <0>; /** 0: default, high, 1: full */
		port-config = <0>; /** 0: default */
		port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/
		port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
		gpio-vbus-power = "GPIOAO_5";
		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
		gpio-work-mask	= <1>; /**0: work on pulldown,1:work on pullup*/
		phy-reg = <0xc0000000>;
		phy-reg-size = <0x20>;
		usb-fifo = <1024>;
		cpu-type = "gxbaby";
		resets = <&clock GCLK_IDX_USB_GENERAL
					    &clock GCLK_IDX_MISC_USB0_TO_DDR
              &clock GCLK_IDX_USB0>;
		reset-names = "usb_general",
						"usb0",
						"usb0_to_ddr";
	};

	/* AUDIO MESON8 DEVICES */
	i2s_dai: I2S {
		#sound-dai-cells = <0>;
		resets = <
			&clock GCLK_IDX_AIU_AI_TOP_GLUE
			&clock GCLK_IDX_AUD_BUF_ABD
			&clock GCLK_IDX_AIU_I2S_OUT
			&clock GCLK_IDX_AIU_AMCLK_MEASURE
			&clock GCLK_IDX_AIU_AIFIFO2
			&clock GCLK_IDX_AIU_AUD_MIXER
			&clock GCLK_IDX_AIU_MIXER_REG
			&clock GCLK_IDX_AIU_ADC
			&clock GCLK_IDX_AIU_TOP_LEVEL
			&clock GCLK_IDX_AIU_AOCLK
			&clock GCLK_IDX_AUD_IN
		>;
		reset-names =
			"top_glue",
			"aud_buf",
			"i2s_out",
			"amclk_measure",
			"aififo2",
			"aud_mixer",
			"mixer_reg",
			"adc",
			"top_level",
			"aoclk",
			"aud_in";
		clocks = <&clock CLK_MPLL2>,
			<&clock CLK_AMCLK>;
		clock-names = "mpll2", "mclk";
		compatible = "amlogic, aml-i2s-dai";
	};
	spdif_dai: SPDIF {
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml-spdif-dai";
		resets = <
			&clock GCLK_IDX_AIU_IEC958
			&clock GCLK_IDX_AIU_ICE958_AMCLK
		>;
		reset-names =
			"iec958",
			"iec958_amclk";
		clocks = <&clock CLK_MPLL1>,
			<&clock CLK_I958>,
			<&clock CLK_AMCLK>,
			<&clock CLK_SPDIF>,
			<&clock CLK_81>;
		clock-names = "mpll1", "i958", "mclk", "spdif", "clk_81";
	};
	pcm_dai: PCM {
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml-pcm-dai";
		pinctrl-names = "aml_audio_btpcm";
		pinctrl-0 = <&audio_btpcm_pins>;
		clocks = <&clock CLK_MPLL0>,
			<&clock CLK_PCM_MCLK>,
			<&clock CLK_PCM_SCLK>;
		clock-names = "mpll0", "pcm_mclk", "pcm_sclk";
		pcm_mode = <1>;	/* 0=slave mode, 1=master mode */
        };
	i2s_plat: i2s_platform {
		compatible = "amlogic, aml-i2s";
		interrupts = <0 29 1>;
	};
	pcm_plat: pcm_platform {
		compatible = "amlogic, aml-pcm";
	};
	spdif_codec: spdif_codec {
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml-spdif-codec";
		device_name = "dummy-spdif-dit.0";
		pinctrl-names = "aml_audio_spdif";
		pinctrl-0 = <&audio_spdif_pins>;
	};
	pcm_codec: pcm_codec{
		#sound-dai-cells = <0>;
		compatible = "amlogic, pcm2BT-codec";
	};
	/* endof AUDIO MESON8 DEVICES */

	/* AUDIO board specific */
	dummy_codec:dummy{
		#sound-dai-cells = <0>;
		compatible = "amlogic, aml_dummy_codec";
		status = "okay";
	};
	aml_m8_snd {
		compatible = "aml, aml_snd_m8";
		status = "okay";
		aml-sound-card,format = "i2s";
		aml_sound_card,name = "AML-M8AUDIO";
		aml,audio-routing =
				"Ext Spk","LOUTL",
				"Ext Spk","LOUTR";

		mute_gpio-gpios = <&gpio GPIOH_3 0>;
		hp_disable;
		hp_paraments = <800 300 0 5 1>;
		pinctrl-names = "aml_snd_m8";
		pinctrl-0 = <&audio_pins>;
		cpu_list = <&cpudai0 &cpudai1 &cpudai2>;
		codec_list = <&codec0 &codec1 &codec2>;
		plat_list = <&i2s_plat &i2s_plat &pcm_plat>;
		cpudai0: cpudai0 {
			sound-dai = <&i2s_dai>;
		};
		cpudai1: cpudai1 {
			sound-dai = <&spdif_dai>;
		};
		cpudai2: cpudai2 {
			sound-dai = <&pcm_dai>;
		};
		codec0: codec0 {
			sound-dai = <&dummy_codec>;
		};
		codec1: codec1 {
			sound-dai = <&spdif_codec>;
		};
		codec2: codec2 {
			sound-dai = <&pcm_codec>;
		};
	};
	/* END OF AUDIO board specific */

	gpio_keypad{
	    compatible = "amlogic, gpio_keypad";
		status = "okay";
		scan_period = <20>;
		key_num = <1>;
	    key_name = "power";
		key_code = <116>;
		key_pin = <&gpio_ao  GPIOAO_3  GPIO_ACTIVE_HIGH>;  /*"GPIOAO_3";*/
	    irq_keyup = <6>;
	    irq_keydown = <7>;
	};

	adc_keypad{
		compatible = "amlogic, adc_keypad";
		status = "okay";
		key_name = "menu", "vol-","vol+", "esc", "home";
		key_num = <5>;
		key_code = <139 114 115 1 102>;
		key_chan = <0 0 0 0 0>;
		key_val = <0 143 271 393 510>; //voltage=0/252/478/692/824mV, val=voltage/1800mV*1023
		key_tolerance = <40 40 40 40 40>;
	};

	aml_sensor0: aml-sensor@0 {
		compatible = "amlogic, aml-thermal";
		device_name = "thermal";
		#thermal-sensor-cells = <1>;
		cooling_devices {
			cpufreq_cool_cluster0 {
				min_state = <1000000>;
				dyn_coeff = <140>;
				cluster_id = <0>;
				node_name = "cpus";
				device_type = "cpufreq";
			};
			cpucore_cool_cluster0 {
				min_state = <1>;
				dyn_coeff = <0>;
				cluster_id = <0>;
				node_name = "cpu_core_cluster0";
				device_type = "cpucore";
			};
			gpufreq_cool {
				min_state = <400>;
				dyn_coeff = <437>;
				cluster_id = <0>;
				node_name = "mali";
				device_type = "gpufreq";
			};
			gpucore_cool {
				min_state = <1>;
				dyn_coeff = <0>;
				cluster_id = <0>;
				node_name = "thermal_gpu_cores";
				device_type = "gpucore";
			};
		};
		cpu_cluster0:cpu_core_cluster0 {
			#cooling-cells = <2>; /* min followed by max */
		};
		gpucore:thermal_gpu_cores {
			#cooling-cells = <2>; /* min followed by max */
		};
	};
	thermal-zones {
		soc_thermal {
			polling-delay = <1000>;
			polling-delay-passive = <100>;
			sustainable-power = <2150>;

			thermal-sensors = <&aml_sensor0 3>;

			trips {
				switch_on: trip-point@0 {
					temperature = <70000>;
					hysteresis = <1000>;
					type = "passive";
				};
				control: trip-point@1 {
					temperature = <80000>;
					hysteresis = <1000>;
					type = "passive";
				};
				hot: trip-point@2 {
					temperature = <85000>;
					hysteresis = <5000>;
					type = "hot";
				};
				critical: trip-point@3 {
					temperature = <260000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				cpufreq_cooling_map {
					trip = <&control>;
					cooling-device = <&cpus 0 4>;
					contribution = <1024>;
				};
				cpucore_cooling_map {
					trip = <&control>;
					cooling-device = <&cpu_cluster0 0 3>;
					contribution = <1024>;
				};
				gpufreq_cooling_map {
					trip = <&control>;
					cooling-device = <&gpu 0 4>;
					contribution = <1024>;
				};
				gpucore_cooling_map {
					trip = <&control>;
					cooling-device = <&gpucore 0 2>;
					contribution = <1024>;
				};
			};
		};
	};

	saradc: saradc {
		compatible = "amlogic, saradc";
		status = "okay";
		interrupts = <0 9 1>;
		interrupt-names = "saradc_int";
		clocks = <&clock CLK_XTAL>;
		clock-names = "saradc_clk";
                reg = <0x0 0xc1108680 0x0 0x30
                        0x0 0xc883c3d8 0x0 0x08>;
	};

        leds: gpio_leds {
                compatible = "gpio-leds";

		pinctrl-names = "led_pins";
		pinctrl-0 = <&led_pins>;

                /* Blue LED */
                heartbeat {
                        label = "blue:heartbeat";
                        gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "heartbeat";
                };
        };

	spi-gpio {
		compatible = "spi-gpio";
		#address-cells = <1>;
		#size-cells = <0>;
		status = "ok";
		id = <0>;
		gpio-sck  = <&gpio GPIOX_2 0>;
		gpio-miso = <&gpio GPIOX_4 0>;
		gpio-mosi = <&gpio GPIOX_7 0>;
		cs-gpios  = <&gpio GPIOX_1 0
			     &gpio GPIOY_14 0>;
		num-chipselects = <2>;

		/* clients */
		spidev0: spi-gpio@0 {
			compatible = "spidev";
			reg = <0>;
			spi-max-frequency = <500000>;
		};
	};
};
&i2c_a {
    status = "okay";

    /* Hardkernel I2C RTC */
    pcf8563: pcf8563@51    {
        status = "okay";
        compatible = "nxp,pcf8563";
        reg = <0x51>;
        #clock-cells = <0>;
    };
};
/*
&i2c_b {
  status = "okay";
};
*/

&i2c_slave {
	status = "disabled";
};
&pinmux {
	audio_pins:audio_pin{
		amlogic,setmask=<AO 0x78000000>;
		amlogic,clrmask=<AO 0x40000>;
		amlogic,pins = "GPIOAO_8","GPIOAO_9","GPIOAO_10","GPIOAO_11";
	};

	audio_spdif_pins:audio_pin1{
		amlogic,setmask=<AO 0x10000>;	/*spdif_out*/
		amlogic,clrmask=<AO 0x40000>;	/*spdif_out*/
		amlogic,pins ="GPIOAO_6";		/*spdif_out*/
	};

	audio_btpcm_pins:audio_btpcm_pins{
		/* BT PCM PINMUX SETTING*/
		amlogic,setmask=<3 0x78000000>;
		amlogic,clrmask=<3 0x803280
				4 0xc0>;
		amlogic,pins ="GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11";
	};

        led_pins: led_pin {
                amlogic,setmask = <AO 0x00000>;
                amlogic,clrmask = <AO 0x80000018>;
                amlogic,pins = "GPIOAO_13";
        };

	odroid_pwm0: odroid_pwm0 {
		amlogic,setmask=<3 0x00020000>;
		amlogic,clrmask=<3 0x00000200>;
		amlogic,pins="GPIOX_6";
	};
	odroid_pwm1: odroid_pwm1 {
		amlogic,setmask=<3 0x00020000
		                 3 0x00060000>;
		amlogic,clrmask=<3 0x00000300
		                 8 0x00000800>;
		amlogic,pins="GPIOX_6","GPIOX_7";
	};
};

&efuse {
	status = "okay";
};
&audio_data{
	status = "okay";
};
&meson_ir {
	status = "okay";
	linux,rc-map-name = "rc-odroid";
};