which-key.lua

local M = {}
M.config = function()
  lvim.builtin.which_key = {
    ---@usage disable which-key completely [not recommended]
    active = true,
    on_config_done = nil,
    setup = {
      plugins = {
        marks = false, -- shows a list of your marks on ' and `
        registers = false, -- shows your registers on " in NORMAL or <C-r> in INSERT mode
        spelling = {
          enabled = true,
          suggestions = 20,
        }, -- use which-key for spelling hints
        -- the presets plugin, adds help for a bunch of default keybindings in Neovim
        -- No actual key bindings are created
        presets = {
          operators = false, -- adds help for operators like d, y, ...
          motions = false, -- adds help for motions
          text_objects = false, -- help for text objects triggered after entering an operator
          windows = false, -- default bindings on <c-w>
          nav = false, -- misc bindings to work with windows
          z = false, -- bindings for folds, spelling and others prefixed with z
          g = false, -- bindings for prefixed with g
        },
      },
      -- add operators that will trigger motion and text object completion
      -- to enable all native operators, set the preset / operators plugin above
      operators = { gc = "Comments" },
      key_labels = {
        -- override the label used to display some keys. It doesn't effect WK in any other way.
        -- For example:
        -- ["<space>"] = "SPC",
        -- ["<cr>"] = "RET",
        -- ["<tab>"] = "TAB",
      },
      icons = {
        breadcrumb = lvim.icons.ui.DoubleChevronRight, -- symbol used in the command line area that shows your active key combo
        separator = lvim.icons.ui.BoldArrowRight, -- symbol used between a key and it's label
        group = lvim.icons.ui.Plus, -- symbol prepended to a group
      },
      popup_mappings = {
        scroll_down = "<c-d>", -- binding to scroll down inside the popup
        scroll_up = "<c-u>", -- binding to scroll up inside the popup
      },
      window = {
        border = "single", -- none, single, double, shadow
        position = "bottom", -- bottom, top
        margin = { 1, 0, 1, 0 }, -- extra window margin [top, right, bottom, left]
        padding = { 2, 2, 2, 2 }, -- extra window padding [top, right, bottom, left]
        winblend = 0,
      },
      layout = {
        height = { min = 4, max = 25 }, -- min and max height of the columns
        width = { min = 20, max = 50 }, -- min and max width of the columns
        spacing = 3, -- spacing between columns
        align = "left", -- align columns left, center or right
      },
      ignore_missing = true, -- enable this to hide mappings for which you didn't specify a label
      hidden = { "<silent>", "<cmd>", "<Cmd>", "<CR>", "call", "lua", "^:", "^ " }, -- hide mapping boilerplate
      show_help = true, -- show help message on the command line when the popup is visible
      show_keys = true, -- show the currently pressed key and its label as a message in the command line
      triggers = "auto", -- automatically setup triggers
      -- triggers = {"<leader>"} -- or specify a list manually
      triggers_blacklist = {
        -- list of mode / prefixes that should never be hooked by WhichKey
        -- this is mostly relevant for key maps that start with a native binding
        -- most people should not need to change this
        i = { "j", "k" },
        v = { "j", "k" },
      },
      -- disable the WhichKey popup for certain buf types and file types.
      -- Disabled by default for Telescope
      disable = {
        buftypes = {},
        filetypes = { "TelescopePrompt" },
      },
    },

    opts = {
      mode = "n", -- NORMAL mode
      prefix = "<leader>",
      buffer = nil, -- Global mappings. Specify a buffer number for buffer local mappings
      silent = true, -- use `silent` when creating keymaps
      noremap = true, -- use `noremap` when creating keymaps
      nowait = true, -- use `nowait` when creating keymaps
    },
    vopts = {
      mode = "v", -- VISUAL mode
      prefix = "<leader>",
      buffer = nil, -- Global mappings. Specify a buffer number for buffer local mappings
      silent = true, -- use `silent` when creating keymaps
      noremap = true, -- use `noremap` when creating keymaps
      nowait = true, -- use `nowait` when creating keymaps
    },
    -- NOTE: Prefer using : over <cmd> as the latter avoids going back in normal-mode.
    -- see https://neovim.io/doc/user/map.html#:map-cmd
    vmappings = {
      ["/"] = { "<Plug>(comment_toggle_linewise_visual)", "Comment toggle linewise (visual)" },
      l = {
        name = "LSP",
        a = { "<cmd>lua vim.lsp.buf.code_action()<cr>", "Code Action" },
      },
    },
    mappings = {
      [";"] = { "<cmd>Alpha<CR>", "Dashboard" },
      ["w"] = { "<cmd>w!<CR>", "Save" },
      ["q"] = { "<cmd>confirm q<CR>", "Quit" },
      ["/"] = { "<Plug>(comment_toggle_linewise_current)", "Comment toggle current line" },
      ["c"] = { "<cmd>BufferKill<CR>", "Close Buffer" },
      ["f"] = {
        function()
          require("lvim.core.telescope.custom-finders").find_project_files { previewer = false }
        end,
        "Find File",
      },
      ["h"] = { "<cmd>nohlsearch<CR>", "No Highlight" },
      ["e"] = { "<cmd>NvimTreeToggle<CR>", "Explorer" },
      b = {
        name = "Buffers",
        j = { "<cmd>BufferLinePick<cr>", "Jump" },
        f = { "<cmd>Telescope buffers previewer=false<cr>", "Find" },
        b = { "<cmd>BufferLineCyclePrev<cr>", "Previous" },
        n = { "<cmd>BufferLineCycleNext<cr>", "Next" },
        W = { "<cmd>noautocmd w<cr>", "Save without formatting (noautocmd)" },
        -- w = { "<cmd>BufferWipeout<cr>", "Wipeout" }, -- TODO: implement this for bufferline
        e = {
          "<cmd>BufferLinePickClose<cr>",
          "Pick which buffer to close",
        },
        h = { "<cmd>BufferLineCloseLeft<cr>", "Close all to the left" },
        l = {
          "<cmd>BufferLineCloseRight<cr>",
          "Close all to the right",
        },
        D = {
          "<cmd>BufferLineSortByDirectory<cr>",
          "Sort by directory",
        },
        L = {
          "<cmd>BufferLineSortByExtension<cr>",
          "Sort by language",
        },
      },
      d = {
        name = "Debug",
        t = { "<cmd>lua require'dap'.toggle_breakpoint()<cr>", "Toggle Breakpoint" },
        b = { "<cmd>lua require'dap'.step_back()<cr>", "Step Back" },
        c = { "<cmd>lua require'dap'.continue()<cr>", "Continue" },
        C = { "<cmd>lua require'dap'.run_to_cursor()<cr>", "Run To Cursor" },
        d = { "<cmd>lua require'dap'.disconnect()<cr>", "Disconnect" },
        g = { "<cmd>lua require'dap'.session()<cr>", "Get Session" },
        i = { "<cmd>lua require'dap'.step_into()<cr>", "Step Into" },
        o = { "<cmd>lua require'dap'.step_over()<cr>", "Step Over" },
        u = { "<cmd>lua require'dap'.step_out()<cr>", "Step Out" },
        p = { "<cmd>lua require'dap'.pause()<cr>", "Pause" },
        r = { "<cmd>lua require'dap'.repl.toggle()<cr>", "Toggle Repl" },
        s = { "<cmd>lua require'dap'.continue()<cr>", "Start" },
        q = { "<cmd>lua require'dap'.close()<cr>", "Quit" },
        U = { "<cmd>lua require'dapui'.toggle({reset = true})<cr>", "Toggle UI" },
      },
      p = {
        name = "Plugins",
        i = { "<cmd>Lazy install<cr>", "Install" },
        s = { "<cmd>Lazy sync<cr>", "Sync" },
        S = { "<cmd>Lazy clear<cr>", "Status" },
        c = { "<cmd>Lazy clean<cr>", "Clean" },
        u = { "<cmd>Lazy update<cr>", "Update" },
        p = { "<cmd>Lazy profile<cr>", "Profile" },
        l = { "<cmd>Lazy log<cr>", "Log" },
        d = { "<cmd>Lazy debug<cr>", "Debug" },
      },

      -- " Available Debug Adapters:
      -- "   https://microsoft.github.io/debug-adapter-protocol/implementors/adapters/
      -- " Adapter configuration and installation instructions:
      -- "   https://github.com/mfussenegger/nvim-dap/wiki/Debug-Adapter-installation
      -- " Debug Adapter protocol:
      -- "   https://microsoft.github.io/debug-adapter-protocol/
      -- " Debugging
      g = {
        name = "Git",
        g = { "<cmd>lua require 'lvim.core.terminal'.lazygit_toggle()<cr>", "Lazygit" },
        j = { "<cmd>lua require 'gitsigns'.next_hunk({navigation_message = false})<cr>", "Next Hunk" },
        k = { "<cmd>lua require 'gitsigns'.prev_hunk({navigation_message = false})<cr>", "Prev Hunk" },
        l = { "<cmd>lua require 'gitsigns'.blame_line()<cr>", "Blame" },
        p = { "<cmd>lua require 'gitsigns'.preview_hunk()<cr>", "Preview Hunk" },
        r = { "<cmd>lua require 'gitsigns'.reset_hunk()<cr>", "Reset Hunk" },
        R = { "<cmd>lua require 'gitsigns'.reset_buffer()<cr>", "Reset Buffer" },
        s = { "<cmd>lua require 'gitsigns'.stage_hunk()<cr>", "Stage Hunk" },
        u = {
          "<cmd>lua require 'gitsigns'.undo_stage_hunk()<cr>",
          "Undo Stage Hunk",
        },
        o = { "<cmd>Telescope git_status<cr>", "Open changed file" },
        b = { "<cmd>Telescope git_branches<cr>", "Checkout branch" },
        c = { "<cmd>Telescope git_commits<cr>", "Checkout commit" },
        C = {
          "<cmd>Telescope git_bcommits<cr>",
          "Checkout commit(for current file)",
        },
        d = {
          "<cmd>Gitsigns diffthis HEAD<cr>",
          "Git Diff",
        },
      },
      l = {
        name = "LSP",
        a = { "<cmd>lua vim.lsp.buf.code_action()<cr>", "Code Action" },
        d = { "<cmd>Telescope diagnostics bufnr=0 theme=get_ivy<cr>", "Buffer Diagnostics" },
        w = { "<cmd>Telescope diagnostics<cr>", "Diagnostics" },
        f = { "<cmd>lua require('lvim.lsp.utils').format()<cr>", "Format" },
        i = { "<cmd>LspInfo<cr>", "Info" },
        I = { "<cmd>Mason<cr>", "Mason Info" },
        j = {
          "<cmd>lua vim.diagnostic.goto_next()<cr>",
          "Next Diagnostic",
        },
        k = {
          "<cmd>lua vim.diagnostic.goto_prev()<cr>",
          "Prev Diagnostic",
        },
        l = { "<cmd>lua vim.lsp.codelens.run()<cr>", "CodeLens Action" },
        q = { "<cmd>lua vim.diagnostic.setloclist()<cr>", "Quickfix" },
        r = { "<cmd>lua vim.lsp.buf.rename()<cr>", "Rename" },
        s = { "<cmd>Telescope lsp_document_symbols<cr>", "Document Symbols" },
        S = {
          "<cmd>Telescope lsp_dynamic_workspace_symbols<cr>",
          "Workspace Symbols",
        },
        e = { "<cmd>Telescope quickfix<cr>", "Telescope Quickfix" },
      },
      L = {
        name = "+LunarVim",
        c = {
          "<cmd>edit " .. get_config_dir() .. "/config.lua<cr>",
          "Edit config.lua",
        },
        d = { "<cmd>LvimDocs<cr>", "View LunarVim's docs" },
        f = {
          "<cmd>lua require('lvim.core.telescope.custom-finders').find_lunarvim_files()<cr>",
          "Find LunarVim files",
        },
        g = {
          "<cmd>lua require('lvim.core.telescope.custom-finders').grep_lunarvim_files()<cr>",
          "Grep LunarVim files",
        },
        k = { "<cmd>Telescope keymaps<cr>", "View LunarVim's keymappings" },
        i = {
          "<cmd>lua require('lvim.core.info').toggle_popup(vim.bo.filetype)<cr>",
          "Toggle LunarVim Info",
        },
        I = {
          "<cmd>lua require('lvim.core.telescope.custom-finders').view_lunarvim_changelog()<cr>",
          "View LunarVim's changelog",
        },
        l = {
          name = "+logs",
          d = {
            "<cmd>lua require('lvim.core.terminal').toggle_log_view(require('lvim.core.log').get_path())<cr>",
            "view default log",
          },
          D = {
            "<cmd>lua vim.fn.execute('edit ' .. require('lvim.core.log').get_path())<cr>",
            "Open the default logfile",
          },
          l = {
            "<cmd>lua require('lvim.core.terminal').toggle_log_view(vim.lsp.get_log_path())<cr>",
            "view lsp log",
          },
          L = { "<cmd>lua vim.fn.execute('edit ' .. vim.lsp.get_log_path())<cr>", "Open the LSP logfile" },
          n = {
            "<cmd>lua require('lvim.core.terminal').toggle_log_view(os.getenv('NVIM_LOG_FILE'))<cr>",
            "view neovim log",
          },
          N = { "<cmd>edit $NVIM_LOG_FILE<cr>", "Open the Neovim logfile" },
        },
        r = { "<cmd>LvimReload<cr>", "Reload LunarVim's configuration" },
        u = { "<cmd>LvimUpdate<cr>", "Update LunarVim" },
      },
      s = {
        name = "Search",
        b = { "<cmd>Telescope git_branches<cr>", "Checkout branch" },
        c = { "<cmd>Telescope colorscheme<cr>", "Colorscheme" },
        f = { "<cmd>Telescope find_files<cr>", "Find File" },
        h = { "<cmd>Telescope help_tags<cr>", "Find Help" },
        H = { "<cmd>Telescope highlights<cr>", "Find highlight groups" },
        M = { "<cmd>Telescope man_pages<cr>", "Man Pages" },
        r = { "<cmd>Telescope oldfiles<cr>", "Open Recent File" },
        R = { "<cmd>Telescope registers<cr>", "Registers" },
        t = { "<cmd>Telescope live_grep<cr>", "Text" },
        k = { "<cmd>Telescope keymaps<cr>", "Keymaps" },
        C = { "<cmd>Telescope commands<cr>", "Commands" },
        l = { "<cmd>Telescope resume<cr>", "Resume last search" },
        p = {
          "<cmd>lua require('telescope.builtin').colorscheme({enable_preview = true})<cr>",
          "Colorscheme with Preview",
        },
      },
      T = {
        name = "Treesitter",
        i = { ":TSConfigInfo<cr>", "Info" },
      },
    },
  }
end

M.setup = function()
  local which_key = require "which-key"

  which_key.setup(lvim.builtin.which_key.setup)

  local opts = lvim.builtin.which_key.opts
  local vopts = lvim.builtin.which_key.vopts

  local mappings = lvim.builtin.which_key.mappings
  local vmappings = lvim.builtin.which_key.vmappings

  which_key.register(mappings, opts)
  which_key.register(vmappings, vopts)

  if lvim.builtin.which_key.on_config_done then
    lvim.builtin.which_key.on_config_done(which_key)
  end
end

return M