title | tags | keywords | last_updated | summary | sidebar | permalink | folder | comments | toc | datatable | boardname | firmware | mcu | version | kconfig_name | low_level | architecture | bootloader_offset | communication | usb_ids | gpio_startup | board_type | klipper_file | state | klipper_img1 | klipper_cap1 | klipper_img2 | klipper_cap2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fly-RPFMex MCU Klipper USB firmware |
17/02/2024 |
How to compile and install the klipper firmware running on a Fly-RPFMex in USB mode |
mydoc_sidebar |
fly_rpfmex_klipper_usb.html |
mydoc |
false |
true |
true |
Fly-RPFMex |
USB |
rp2040 |
v1 |
rpfmex |
[*] |
(Raspberry Pi RP2040) |
(16KiB bootloader) |
(USB) |
(gpio24) |
toolboard |
klipper.uf2 |
install |
klipper/rp2040_usb_gpio24.png |
Klipper Menu Config USB |
fly-super8/fly-super8_klipper_makeflash_burn.png |
Burn Klipper firmware over USB |
{% include important.html content="This guide assumes you have a working Klipper host installation on a Raspberry Pi or compatible device" %}
{% include custom/klipper/menuconfig.html %}
{% include custom/klipper/flash_katapult_usb.html %}
{% include custom/mcu/rpfmex/fly_rpfmex_links.html %}