| title | tags | keywords | last_updated | summary | sidebar | permalink | folder | comments | toc | datatable | boardname | firmware | mcu | version | kconfig_name | architecture | flash | deployment | communication | can_rx | can_tx | can_bus_speed | gpio_bootloader_set | support_bootloader_entry | enable_bootloader_gpio | enable_status | status_pin | board_type | katapult_file | katapult_img1 | katapult_cap1 | katapult_img2 | katapult_cap2 | katapult_img3 | katapult_cap3 | installKlipperURL | installKlipperName |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Katapult Configuration for the Fly-SB2040-V1 on CANbus |
04/09/2023 |
How to Configure Katapult for CANbus Operation on the Fly-SB2040-V1 |
mydoc_sidebar |
fly_sb2040_v1_canboot_can.html |
mydoc |
false |
true |
true |
Fly-SB2040-V1 |
CANbus |
rp2040 |
v1 |
sb2040v1 |
(Raspberry Pi RP2040) |
(W25Q080 with CLKDIV 2) |
(Do not build) |
(CAN bus) |
(4) |
(5) |
(1000000) |
() |
[*] |
[ ] |
[*] |
(gpio24) |
toolboard |
katapult.uf2 |
katapult/rp2040_can_gpio24.png |
Katapult Menu Config CAN |
fly-sb2040_v1/sb2040_button.png |
Fly-SB2040-V1 Boot Button Location |
fly-sb2040_v1/fly-sb2040_lsusb_screenshot.png |
lsusb Results |
./fly_sb2040_v1_klipper_can.html |
Klipper for CANbus configuration section |
{% include important.html content="This guide assumes you have a working Klipper host installation on a Raspberry Pi or compatible device" %}
{% include custom/katapult/compile.html %}
{% include custom/katapult/rp2040_usb_flash.html %}
{% include custom/mcu/sb2040v1/sb2040_v1_links.html %}