How To Make DIY Arduino Gesture Control Robot At Home

In this project I am going to show you how to make a DIY Arduino Gesture Control Robot.

Video Tutorial

Please subscribe ❤️ For all lovers of #ArduinoGestureRobot #ArduinoProjects #ArduinoRobot

Parts Required for Receiver

1. Robot Tank Chassis - https://bit.ly/3j8y2Q5
   
2. Arduino Nano V3 - http://bit.ly/2MHVDYi
   
3. L298N Motor Driver - https://bit.ly/369zBJJ
   
4. NRF24L01+ Antenna Module - https://bit.ly/3ies6Uw
   
5. Adapter For NRF24L01 - https://bit.ly/30cFJgw
   
6. 3.7v 18650 Li-ion Battery(x2) - https://bit.ly/2ECGb01
   
7. 18650 Battery Holder - https://bit.ly/30cqwMJ
   
8. Breadboard - http://bit.ly/30ckFoc
   

Parts Required for Transmitter

1. Get the PCB Board -
   
2. Arduino Pro Mini 3.3v 8MHz - https://bit.ly/2GawAy6
   
3. NRF24L01+ RF Module - https://bit.ly/3je3v3u
   
4. GY-61 ADXL335 Accelerometer - https://bit.ly/2EC4jQq
   
5. FT232RL FTDI USB To TTL - http://bit.ly/2RL89st
   
6. 3.7v 750mah Lipo Battery - https://bit.ly/2ECTdL7
   
7. Self-locking On / Off Switch - https://bit.ly/3cyEtJL
   
8. LED Kit - http://bit.ly/37OajhS
   
9. Lipo Connector Pin - https://bit.ly/2S3dIUi
   
10. 100uF / 10uF Capacitor - http://bit.ly/2s6Sonz
    
11. Resistor - http://bit.ly/2lJhi8Z
    
12. Female Header Pin - http://bit.ly/2MJtnVm
    
13. Soldering Tool Kit - http://bit.ly/2D6YbuC
    

Schematic

Get the PCB Board:

(If you want to buy the same PCB which one I used in this project. Just download the Gerber file and upload it to https://www.pcbway.com/ to order the PCB board.)

$0 For New members first order & Low Price for PCB Stencil at https://www.pcbway.com/

👉🏻

😊 Contact Me: https://www.instagram.com/mertarduino