Skip to content

SAM BA Monitor

Jump to bottom
KalyanCManukonda edited this page Jan 24, 2019 · 1 revision

The SAM-BA Monitor provides an easy way to program the on-chip Flash memory. It supports both USB and UART communications, and it will continuously look for a start condition on the UART and/or USB interfaces.

The start condition on the USB interface is enumeration completion. When the start condition is detected, the SAM-BA Monitor enters an infinite loop and is ready for SAM-BA commands.

Start condition on the UART interface is indicated with the '#' (pound sign) character. When the SAM-BA Monitor receives this character, it awaits the SAM-BA commands.

  1. Home
  2. ATECC608A Applications
  3. SecureBoot Features
  4. SAM-BA Monitor
  5. Software Implementation
    1. Using SAM-BA Monitor Application
    2. Running SAM-BA
  6. Running the Example Application
    1. Building and Downloading the SAM-BA Monitor Application
    2. Building and Downloading the User Application
    3. Provisioning the ATECC608A Device
    4. Binding the Target Board to the ATECC608A Device
    5. Verifying the SecureBoot Feature
  7. Porting to other Bootloaders
Clone this wiki locally