title | description | services | author | ms.service | ms.subservice | ms.topic | ms.date | ms.author |
---|---|---|---|---|---|---|---|---|
Tutorial to connect to, configure, activate Azure Stack Edge Pro R device in Azure portal | Microsoft Docs |
Learn how you can connect to your Azure Stack Edge Pro R device by using the local web UI. |
databox |
alkohli |
databox |
edge |
tutorial |
03/28/2022 |
alkohli |
This tutorial describes how you can connect to your Azure Stack Edge Pro R device by using the local web UI.
The connection process can take around 5 minutes to complete.
In this tutorial, you learn about:
[!div class="checklist"]
- Prerequisites
- Connect to a physical device
Before you configure and set up your Azure Stack Edge Pro R device, make sure that:
- You've installed the physical device as detailed in Install Azure Stack Edge Pro R.
- You've run the Azure Stack Network Readiness Checker tool to verify that your network meets Azure Stack Edge requirements. For instructions, see Check network readiness for Azure Stack Edge devices.
-
Configure the Ethernet adapter on your computer to connect to the Azure Stack Edge Pro R device with a static IP address of 192.168.100.5 and subnet 255.255.255.0.
-
Connect the computer to PORT 1 on your device. If connecting the computer to the device directly (without a switch), use an Ethernet crossover cable or a USB Ethernet adapter. Use the following illustration to identify PORT 1 on your device.
-
Open a browser window and access the local web UI of the device at
https://192.168.100.10
.
This action may take a few minutes after you've turned on the device.You see an error or a warning indicating that there is a problem with the website's security certificate.
-
Select Continue to this webpage.
These steps might vary depending on the browser you're using. -
Sign in to the web UI of your device. The default password is Password1.
-
At the prompt, change the device administrator password.
The new password must contain between 8 and 16 characters. It must contain three of the following characters: uppercase, lowercase, numeric, and special characters.
You're now at the Overview page of your device. The next step is to configure the network settings for your device.
In this tutorial, you learned about:
[!div class="checklist"]
- Prerequisites
- Connect to a physical device
To learn how to configure network settings on your Azure Stack Edge Pro R device, see:
[!div class="nextstepaction"] Configure network