Skip to content

Latest commit

 

History

History
175 lines (119 loc) · 5.23 KB

load-balancer-ipv6-for-linux.md

File metadata and controls

175 lines (119 loc) · 5.23 KB
Raw
title titleSuffix description services author keywords ms.service ms.topic ms.date ms.author ms.custom
Configure DHCPv6 for Linux VMs
Azure Load Balancer
In this article, learn how to configure DHCPv6 for Linux VMs.
load-balancer
mbender-ms
ipv6, azure load balancer, dual stack, public ip, native ipv6, mobile, iot
load-balancer
how-to
06/21/2024
mbender
template-how-to, engagement-fy23, doc-a-thon, linux-related-content

Configure DHCPv6 for Linux VMs

Some of the Linux virtual-machine images in the Azure Marketplace don't have Dynamic Host Configuration Protocol version 6 (DHCPv6) configured by default. To support IPv6, DHCPv6 must be configured in the Linux OS distribution that you're using. The various Linux distributions configure DHCPv6 in various ways because they use different packages.

Note

Recent SUSE Linux and CoreOS images in the Azure Marketplace have been pre-configured with DHCPv6. No additional changes are required when you use these images.

This document describes how to enable DHCPv6 so that your Linux virtual machine obtains an IPv6 address.

Warning

By improperly editing network configuration files, you can lose network access to your VM. We recommended that you test your configuration changes on non-production systems. The instructions in this article have been tested on the latest versions of the Linux images in the Azure Marketplace. For more detailed instructions, consult the documentation for your own version of Linux.

RHEL/Oracle

For RHEL and Oracle Linux versions 7.4 or higher, follow these steps:

  1. Edit the /etc/sysconfig/network file, and add the following parameter:

    NETWORKING_IPV6=yes

  2. Edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file, and add the following two parameters:

    IPV6INIT=yes
DHCPV6C=yes

  3. Renew the IPv6 address:

    sudo ifdown eth0 && sudo ifup eth0

openSUSE/SLES

Recent SUSE Linux Enterprise Server (SLES) and openSUSE images in Azure have been preconfigured with DHCPv6. No other changes are required when you use these images. If you have a VM that's based on an older or custom SUSE image, use one of the following procedures to configure DHCPv6.

OpenSuSE 13 and SLES 11

  1. Install the dhcp-client package, if needed:

    sudo zypper install dhcp-client

  2. Edit the /etc/sysconfig/network/ifcfg-eth0 file, and add the following parameter:

    DHCLIENT6_MODE='managed'

  3. Renew the IPv6 address:

    sudo ifdown eth0 && sudo ifup eth0

OpenSUSE Leap and SLES 12

For openSUSE Leap and SLES 12, follow these steps:

  1. Edit the /etc/sysconfig/network/ifcfg-eth0 file, and replace the #BOOTPROTO='dhcp4' parameter with the following value:

    BOOTPROTO='dhcp'

  2. To the /etc/sysconfig/network/ifcfg-eth0 file, add the following parameter:

    DHCLIENT6_MODE='managed'

  3. Renew the IPv6 address:

    sudo ifdown eth0 && sudo ifup eth0

Ubuntu

For Ubuntu versions 17.10 or higher, follow these steps:

  1. Edit the /etc/dhcp/dhclient.conf file, and add the following line:

    timeout 10;

  2. Create a new file in the cloud.cfg.d folder that retains your configuration through reboots. The information in this file will override the default NETPLAN config (in YAML configuration files at this location: /etc/netplan/*.yaml).

    Create a /etc/cloud/cloud.config.d/91-azure-network.cfg file. Ensure that dhcp6: true is reflected under the required interface, as shown by the following sample:

     network:
     version: 2
     ethernets:
         eth0:
             dhcp4: true
             dhcp6: true
             match:
                  driver: hv_netvsc
             set-name: eth0

  3. Save the file and reboot.

  4. Use ifconfig to verify virtual machine received IPv6 address.

    If ifconfig isn't installed, run the following commands:

    sudo apt update
sudo apt install net-tools

    :::image type="content" source="./media/load-balancer-ipv6-for-linux/ipv6-ip-address-ifconfig.png" alt-text="Screenshot of ifconfig showing IPv6 IP address.":::

Debian

  1. Edit the /etc/dhcp/dhclient6.conf file, and add the following line:

    timeout 10;

  2. Edit the /etc/network/interfaces file, and add the following configuration:

    iface eth0 inet6 auto
    up sleep 5
    up dhclient -1 -6 -cf /etc/dhcp/dhclient6.conf -lf /var/lib/dhcp/dhclient6.eth0.leases -v eth0 || true

  3. Renew the IPv6 address:

    sudo ifdown eth0 && sudo ifup eth0

CoreOS

Recent CoreOS images in Azure have been preconfigured with DHCPv6. No other changes are required when you use these images. If you have a VM based on an older or custom CoreOS image, follow these steps:

  1. Edit the /etc/systemd/network/10_dhcp.network file:

    [Match]
eth0

[Network]
DHCP=ipv6

  2. Renew the IPv6 address:

    sudo systemctl restart systemd-networkd