title | ms.topic | description | ms.date | keywords | |
---|---|---|---|---|---|
OID_WDI_TASK_SET_RADIO_STATE (dot11wificxintf.h) |
reference |
The OID_WDI_TASK_SET_RADIO_STATE task command is used to set the Wi-Fi radio state for the adapter. |
07/31/2021 |
|
[!INCLUDE WiFiCx topic note]
OID_WDI_TASK_SET_RADIO_STATE is used to set the Wi-Fi radio state for the adapter.
Object | Abort capable | Default priority (host driver policy) | Normal execution time (seconds) |
---|---|---|---|
Adapter | No | 1 | 1 |
The task must be completed only after the disconnect activity has been completed.
The IHV component may also send unsolicited indications about radio state changes to the host.
Before the host turns off the radio, it disconnects all peers and stops any Group Owner that is running. The adapter is not expected to remember the station/GO profile information across a radio OFF/ON transition.
TLV | Multiple TLV instances allowed | Optional | Description |
---|---|---|---|
WDI_TLV_RADIO_STATE_PARAMETERS | The desired state of the radio. If this set to 1, the radio is enabled. If this is set to 0, the radio is turned off. |
NDIS_STATUS_WDI_INDICATION_SET_RADIO_STATE_COMPLETE
NDIS_STATUS_WDI_INDICATION_RADIO_STATUS
This indication is used to report changes in the radio state for the adapter. This is sent both when a software radio change is triggered by the host and when a hardware radio state change is detected by the adapter.
Requirement | Value |
---|---|
Minimum supported client | Windows 11 |
Minimum supported server | Windows Server 2022 |
Header | dot11wificxintf.h |