buzz3

\mainpage Main Page

---

Buzz 3 click

Buzz 3 Click is a compact add-on board that contains a sounder driver that produces higher volume with a lower current. This board features the PAM8904, a piezo-sounder driver with an integrated Multi-Mode charge pump boost converter from Diodes Incorporated.

click Product page

---

Click library

• Author : Jelena Milosavljevic
• Date : Jul 2021.
• Type : PWM type

Software Support

We provide a library for the Buzz3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for Buzz3 Click driver.

Standard key functions :

• buzz3_cfg_setup Config Object Initialization function.

void buzz3_cfg_setup ( buzz3_cfg_t *cfg );

• buzz3_init Initialization function.

err_t buzz3_init ( buzz3_t *ctx, buzz3_cfg_t *cfg );

• buzz3_default_cfg Click Default Configuration function.

err_t buzz3_default_cfg ( buzz3_t *ctx );

Example key functions :

• buzz3_pwm_start This function starts the PWM module output.

err_t buzz3_pwm_start ( buzz3_t *ctx );

• buzz3_set_gain_operating_mode The function set gain operating mode of the PAM8904 piezo sounder driver with integrated charge pump boost converter on Buzz 3 click board.

err_t buzz3_set_gain_operating_mode ( buzz3_t *ctx, uint8_t op_mode );

• buzz3_play_sound This function plays sound on buzzer.

void buzz3_play_sound ( buzz3_t *ctx, uint16_t freq, uint16_t duration );

Example Description

This example demonstrates the use of Buzz 3 click boards with PAM8904 for play the Imperial March. PAM8904 is piezo-sounder driver with an integrated Multi-Mode charge pump boost converter from Diodes Incorporated.

The demo application is composed of two sections :

Application Init

Initializes GPIO, set AN and RST pin as outputs, begins to write a log. Initialization driver enables - GPIO and configures the appropriate MCU pin for sound generation, also write log.

void application_init ( void ) 
{
    log_cfg_t log_cfg;          /**< Logger config object. */
    buzz3_cfg_t buzz3_cfg;      /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.

    buzz3_cfg_setup( &buzz3_cfg );
    BUZZ3_MAP_MIKROBUS( buzz3_cfg, MIKROBUS_1 );
    err_t init_flag  = buzz3_init( &buzz3, &buzz3_cfg );
    if ( PWM_ERROR == init_flag ) 
    {
        log_error( &logger, " Application Init Error. " );
        log_info( &logger, " Please, run program again... " );

        for ( ; ; );
    }

    buzz3_default_cfg ( &buzz3 );
    buzz3_set_duty_cycle ( &buzz3, 0.0 );
    log_printf( &logger, "---------------------\r\n" );
    log_printf( &logger, " Set the gain to x1  \r\n" );
    log_printf( &logger, "---------------------\r\n" );
    Delay_ms ( 100 );
    buzz3_pwm_start( &buzz3 );
    buzz3_set_gain_operating_mode( &buzz3, BUZZ3_OP_MODE_GAIN_x1 );

    log_info( &logger, " Application Task " );
}

Application Task

Plays the Imperial March melody. Also logs an appropriate message on the USB UART.

void application_task ( void ) 
{
    log_printf( &logger, "   Play the music    \r\n" );
    buzz3_melody( );
    log_printf( &logger, "---------------------\r\n" );
    Delay_ms ( 1000 );
}

Note

The minimal PWM Clock frequency required for this example is the frequency of tone C6 - 1047 Hz. So, in order to run this example and play all tones correctly, the user will need to decrease the MCU's main clock frequency in MCU Settings for the certain architectures in order to get the required PWM clock frequency.

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Buzz3

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.

---