color7

\mainpage Main Page

---

Color 7 click

Color 7 click is a very accurate color sensing Click board which features the TCS3472 color light to digital converter with IR filter, from ams.

click Product page

---

Click library

• Author : Katarina Perendic
• Date : okt 2019.
• Type : I2C type

Software Support

We provide a library for the Color7 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Color7 Click driver.

Standard key functions :

• Config Object Initialization function.

void color7_cfg_setup ( color7_cfg_t *cfg );

• Initialization function.

COLOR7_RETVAL color7_init ( color7_t *ctx, color7_cfg_t *cfg );

• Click Default Configuration function.

void color7_default_cfg ( color7_t *ctx );

Example key functions :

• Functions for detect colors

uint8_t color7_get_color( color7_t *ctx );

• Get interrut pin state

uint8_t color7_get_interrupt_state ( color7_t *ctx );

• Functions for read color ratio

float color7_read_color_ratio ( color7_t *ctx, uint8_t color );

Examples Description

Demo application reads and detects colors - detected color logs on USBUART.

The demo application is composed of two sections :

Application Init

Configuring clicks and log objects. Settings the click in the default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;
    color7_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    color7_cfg_setup( &cfg );
    COLOR7_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    color7_init( &color7, &cfg );

    color7_default_cfg( &color7 );
    log_info( &logger, "---- Start measurement ----" );
}

Application Task

Reads light color and checks which color of light is detected by the sensor If the light color is detected, the detected color message is logged on the USBUART.

void application_task ( void )
{
    uint8_t color;

    //  Task implementation.

    color = color7_get_color( &color7 );

    switch( color )
    {
        case 1:
        {
            log_printf( &logger, "--- Color: ORANGE \r\n" );
            break;
        }
        case 2:
        {
            log_printf( &logger, "--- Color: RED \r\n" );
            break;
        }
        case 3:
        {
            log_printf( &logger, "--- Color: PINK \r\n" );
            break;
        }
        case 4:
        {
            log_printf( &logger, "--- Color: PURPLE \r\n" );
            break;
        }
        case 5:
        {
            log_printf( &logger, "--- Color: BLUE \r\n" );
            break;
        }
        case 6:
        {
            log_printf( &logger, "--- Color: CYAN \r\n" );
            break;
        }
        case 7:
        {
            log_printf( &logger, "--- Color: GREEN \r\n" );
            break;
        }
        case 8:
        {
            log_printf( &logger, "--- Color: YELLOW \r\n" );
            break;
        }
    }
    Delay_100ms();
}

Note

Light source must be pointed towards sensor in order for sensor to detect light source color correctly. We used the HSL color palette on the monitor as an example.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Color7

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---