We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
溢出日期是 4 月 6 日 https://en.wikipedia.org/wiki/GPS_Week_Number_Rollover
The text was updated successfully, but these errors were encountered:
感谢指教! 如您所说,我见到有网友报告说2019年4月6日之后M241不能正常工作了。后来和友人讨论,我也觉得M241的这次错误和GPS周数翻转有关。 奇怪的是,我手上的机器在4月6日之后还正常工作了一段时间,时间显示和数据记录两个功能一直是能用的,直至我提到的那个时刻之后几分钟,我无意中检查其显示,才见到错误出现。这个时刻的痕迹在当天读出来的原始数据里很明显。 我无法解释这个时刻有何特别,也不清楚为何不是和大家一样为4月6日。也许M241内部的软件也有很多个小版本吧。
Sorry, something went wrong.
芯片 Real Time Clock 時鐘如果一直走下去是沒事的,不過要是定位斷掉,重新定位就不行
下面是我另一邊寫的測試結果 GPSBabel/gpsbabel#349 (comment)
这应该不能解释我遇到的异常情况。我隔一两天就会用一次 M-241,用时才开,平时关掉开关。而且从 4 月 6 号到 22 号这段时间我肯定更换过电池的。无论是内部的时钟还是定位都应该中断过才是。
No branches or pull requests
溢出日期是 4 月 6 日
https://en.wikipedia.org/wiki/GPS_Week_Number_Rollover
The text was updated successfully, but these errors were encountered: